Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

VALVE,GLOBE

Open
N0010427QLA27Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by NAVSUP Weapon Systems Support Mech, is a Request for Quote for the teardown, evaluation, and repair of one Globe Valve (NSN 4820-01-351-3166). The government is seeking a Repair Turnaround Time (RTAT) of 63 days, measured from the physical receipt of the asset at the contractor's facility to the date of government acceptance. The contract is issued under Emergency Acquisition Flexibilities, with all freight handled as FOB Origin. Government Source Inspection (GSI) is required, and the award will be made to the most advantageous offeror based on a combination of price and past performance, with past performance weighted as more important than price. The contractor must adhere to strict quality and packaging standards, including MIL-STD-130 for marking and MIL-STD-2073 for preservation. All payment requests and receiving reports must be processed electronically via the Wide Area Workflow (WAWF) system. Key compliance requirements include adherence to the Buy American and Balance of Payments programs, cybersecurity maturity model certification, and the provision of Material Safety Data Sheets for any hazardous materials. Failure to meet the established RTAT will result in a price reduction per unit per month, unless the delay is determined to be excusable.

General Info

RFQ for the teardown, evaluation, and repair of one Globe Valve.

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

Read the document

Due in 9 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 9 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
CONTACT INFORMATION|4|N713.26|GLF|Sign up to see this detail|Sign up to see this detail| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|COMBO INVOICE & RECEIVING||TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|||TBD|||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025))|1|| SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(JUL 2026))|2||| CONTRACTOR PURCHASING SYSTEM ADMINISTRATION-BASIC (DEV 2026-O0015)(JUL 2026)|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| This solicitation is issued pursuant to Emergency Acquisition Flexibilities (EAF). CASREP ACCELERATED DELIVERY IS ENCOURAGED AND ACCEPTED AT NO ADDITIONAL COST TO GOVERNMENT. All freight is FOB Origin. This RFQ is for repair. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. Verify nomenclature, part number, and NSN prior to responding. The Government is seeking a Repair Turnaround Time (RTAT) of: 63 Days Government Source Inspection (GSI) is required. Please note freight is handled by Navy CAV or Proxy CAV as stated in NAVSUPWSSFA24 or NAVSUPWSSFA25. Your quote should include the following information: QUOTE AMOUNT AND RTAT Check one: Firm-fixed-Price ___ Estimated ___ NTE ___ Unit Price:__________ Total Price:__________ Repair Turnaround Time (RTAT): _______ days If your company is not quoting the Government's Required Repair Turnaround Time (RTAT) or earlier, provide your company's capacity constraints? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ Repair Turnaround Time (RTAT): the resultant contractual delivery requirement is measured from asset Return to the date of asset acceptance under the terms of the contract. For purposes of this section, Return is defined as physical receipt of the F-condition asset at the contractor's facility as reflected in the Action Date entry in the Commercial Asset Visibility (CAV) system. In accordance with the CAV Statement of Work, the contractor is required to accurately report all transactions by the end of the fifth regular business day after receipt and the Action Date entered in CAV must be dated to reflect the actual date of physical receipt. The Contractor must obtain final inspection and acceptance by the Government for all assets within the RTATs established in this contract. Return Material Authorization # (RMA), if applicable:__________ Delivery Vehicle (if Delivery Order requested) (if your company has a current BOA/IDIQ, for example) :__________________ TESTING AND EVALUATION IF BEYOND REPAIR T&E fee/price (if asset is determined BR/BER): If an item is determined BR, and the contractor provides documentation that costs were incurred during evaluation and determination of BR, the contracting officer will negotiate a reduced contract price, not-to exceed (NTE) $___________associated with the repair effort to reflect the BR status of the equipment. The T&E fee (if asset is determined BR/BER) was determined/computed based on:______________________________________. IMPORTANT NOTE: Any asset for which the contractor does not meet the required RTAT will incur a price reduction per unit/per month the contractor is late - any delay determined to be excusable (e.g. Government Delay) will not result in a price reduction. If a price reduction is required due to unexcusable contractor delay, the Contracting Officer will implement the aforementioned price reduction via a ""reconciliation modification"" at the end of the contract performance. Price reductions made pursuant to this section shall not limit other remedies available to the Government for failure to meet required RTATs, including but not limited to the Government's right to terminate for default. In reference to the above important note, the contractor provides the following price reduction amount per unit per month the contractor does not meet the RTAT: $__________, up to a maximum of: $_________. AWARDEE INFO & PERFORMANCE LOCATION Awardee CAGE: __________ Inspection & Acceptance CAGE, if not same as ""awardee CAGE"": __________ Facility/Subcontractor CAGE (where the asset should be shipped), if not same as ""awardee CAGE"":__________ IOT COMPARE REPAIR PRICE TO PRICE TO BUY NEW New unit price:__________ New unit delivery lead-time:__________ \ 1. SCOPE 1.1 This contract/purchase order contains the requirements for repair and the contract quality requirements for the VALVE,GLOBE . 2. APPLICABLE DOCUMENTS 2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 3. REQUIREMENTS 3.1 Cage Code/Reference Number Items - The VALVE,GLOBE repaired under this contract/purchase order shall meet the operational and functional requirements as represented by the Cage Code(s) and reference number(s) listed below. All repair work shall be performed in accordance with the contractors repair/overhaul standard practices, manuals and directives including but not limited to drawings, technical orders, manufacturing operations, tooling instructions, approved repair standards and any other contractor or government approved documents developed to provide technical repair procedures. CAGE___Ref. No. ;86184 74422; 3.2 Marking - This item shall be physically identified in accordance with ;MIL-STD-130, REV N, 16 NOV 2012; . 3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements: Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number. Code 2: Assembly (or set or kit) not furnished - Used following detail parts. Code 3: Part not furnished separately - Use assembly. Code 4: Part redesigned - Old and new parts are completely interchangeable. Code 5: Part redesigned - New part replaces old. Old part cannot replace new. Code 6: Part redesigned - Parts not interchangeable. 4. QUALITY ASSURANCE 4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material. 4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies. 4.4 Inspection/Testing Repaired Items - The Contractor shall perform all inspection and testing requirements as specified in the original manufacturer's specifications and drawings. 5. PACKAGING 5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below. MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES 6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products. Most Specifications can obtained directly from http://quicksearch.dla.mil/ A. Availability of Cancelled Documents - The DODSSP offers cancelled documentsthat are required by private industry in fulfillment of contractual obligationsin paper format. Documents can be requested by phoning the Subscription Services Desk. B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. Theymay be obtained from the publishers of the applicable societies. C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to: Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035 D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government ContractNumber, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document. E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from: Contracting Officer NAVSUP-WSS Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered enue: Commanding Officer NAVSUP-WSS Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788 G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from: Commanding Officer NAVSUP-WSS Code 1 Support Branch 700 Robbins Avenue Philadelphia, Pa. 19111-5094 H. Interim Changes and Classified Specifications must be obtained by submitting a request on DD Form 1425 to NAVSUP-WSS. 6.2 In accordance with OPNAVINST 5510.1 all documents and drawings provided by the U.S. Navy to perspective Contractors must include a "Distribution Statement" to inform the contractor of the limits of distribution, and the safeguarding of the information contained on those documents and drawings. There are 7 (seven) seperate distribution statement codes used for non-classified documents and drawings. The definition for each is as follows: A... approved for public release; distribution is unlimited. B... distribution authorized to US Governments agencies only. C... distribution authorized to US Government agencies and their contractors. D... distribution authorized to DoD and DoD contractors only. E... distribution authorized to DoD Components only. F... further distribution only as directed by Commander, Naval Sea Systems Command, code 09T. X... distribution is authorized to US Government agencies and private individuals or enterprises eligible to obtain export controlled technical data in accordance with OPNAVINST 5510.161. 6.3 Notice To Distributors/Offerors - Consideration for award of contract shall be given only to authorized distributors of the original manufacturer's item represented in this solicitation. If you desire to be considered as a potential source for award of this contract, proof of being an authorized distributor shall be provided on company letterhead signed by a responsible company official and sent with your offer to the Procurement Contracting Officer.

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
Federal
DISK,VALVE
Solicitation # N0010426QNE78
Solicitation N00104-26-Q-NE78 is a request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the procurement of five Valve Disks (NSN 4820-01-453-6627). The material is designated as Special Emphasis Level I material because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the ship. Due to this criticality, the contract mandates strict quality assurance, including a higher-level contract quality requirement and a zero-defect acceptance policy. The award will be made to a single responsible offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. Technical requirements specify that the disks must be manufactured from EB Spec 2937 or ASTM-B564, UNS N06625, and must undergo rigorous testing, including ultrasonic inspection prior to machining, dye penetrant inspection after final machining, and alloy identity testing. The contractor must provide forging sketches and First Article Testing reports. All internal threads must be cut rather than cold-formed and inspected per FED-STD-H28. The contractor is required to maintain an ISO-9001 compliant quality system and submit a comprehensive certificate of compliance and test results via the Wide Area Workflow system for review and acceptance by the Portsmouth Naval Shipyard prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,BALL
Solicitation # N0010426QND46
Solicitation N00104-26-Q-ND46, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a total small business set-aside for the procurement of a Ball Valve (NSN 4820-01-107-0899). This item is designated as a Critical Safety Item and Special Emphasis Material (Level I) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vital ship systems. The requirement is pursuant to Emergency Acquisition Flexibilities and is certified for national defense under the Defense Priorities and Allocations System. The current solicitation close date is November 6, 2026, with a delivery requirement of 120 days after award on an FOB Destination basis. The contract mandates rigorous quality assurance and traceability standards, including a one-year warranty from the date of delivery and higher-level quality requirements. Contractors must provide comprehensive material certifications, including quantitative chemical and mechanical analysis for specific components such as the body, tube, and ball. Required testing includes liquid penetrant and ultrasonic inspections, with lot acceptance based on a zero-defect policy. Award will be made to a single responsible offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Invoicing and payment will be processed electronically via the Wide Area Workflow system.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
BALL & SEAT SET
Solicitation # N0010426QND18
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Ball and Seat Set (NSN 4820-01-331-6847). The material is designated as Special Emphasis Material Level I because it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or the loss of the ship. Due to a classified annex, offerors must possess a valid U.S. Security Clearance of Confidential or higher to respond. The procurement is a Total Small Business Set-Aside, rated for national defense, and conducted under Emergency Acquisition Flexibility with a delivery window of 120 days. Technical requirements are stringent, requiring specific materials such as SAE-AMS-6931 or ASTM-B367 Grade C-5 for the ball and MD71-GG Mearthane for the seats. The contractor must perform rigorous testing, including hydrostatic tests or dye penetrant inspections, and adhere to strict surface waviness and Teflon coating specifications. Quality assurance is managed through Government Source Inspection via DCMA, with lot acceptance based on zero defects. All certification data and certificates of compliance must be submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Award evaluation prioritizes past performance, utilizing the DoD Supplier Performance Risk System (SPRS), with price serving as a secondary factor.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QNE26
This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 50 fluid valve stems (NSN 4820-01-386-7327). The material is designated as Special Emphasis Level I due to its use in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Consequently, the contract mandates rigorous quality controls, including a required quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. The stems must be manufactured according to Electric Boat and Newport News drawings, utilizing specific materials such as QQ-N-286 Alloy UNS N05500 for the stem and ASTM-B505 Alloy UNS C90300 for the nut. Key technical requirements include a prohibition on weld repairs, mandatory ultrasonic inspection for starting materials over 4 inches in diameter, and slow strain rate tensile testing performed by approved laboratories. The contractor must provide a comprehensive Certificate of Compliance and detailed test results via Wide Area Workflow (WAWF) for review by the Portsmouth Naval Shipyard prior to shipment. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted more heavily than price. Packaging must adhere to MIL-STD-2073 and MIL-STD-129, and all items are subject to Government Source Inspection at the origin.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,LINEAR,DIRECT
Solicitation # N0010426QFC29
This contract is for the procurement of 11 linear direct valves (NSN 4820-01-061-0162) to be used in crucial shipboard systems. Due to the critical nature of the equipment, the material is designated as Special Emphasis SUBSAFE/Non-Level I material, meaning any defect could lead to catastrophic failure, loss of life, or loss of the ship. The contractor must adhere to strict quality assurance standards, including ISO-9001 and specific calibration requirements, and must provide a Certificate of Compliance and a Certificate of Tests for each serialized component. All items must be permanently marked with unique serial numbers per MIL-STD-792 and must be mercury-free. The contract is a DO-rated order certified for national defense use and is issued under Emergency Acquisition Flexibilities. Delivery is required within 365 days of the effective date on an FOB Destination basis. Payment and receiving reports must be processed through the Wide Area Workflow (WAWF) system, with specific routing to DoDAAC N50286 for shipping and N39040 for inspection and acceptance. Award is based on a single award to the most advantageous offeror, with past performance weighted more heavily than price. Packaging and marking must comply with MIL-STD-2073 and MIL-STD-129, and the contractor is required to maintain a quality system subject to Government Quality Assurance at source.
Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 334412
New
Federal
A4,I/O,BOX,TI16
Solicitation # N0010426QNF06
Solicitation N0010426QNF06, issued by NAVSUP Weapon Systems Support Mech, is a fixed-price request for quotations for the teardown, evaluation, repair, and modification of critical electronic components, specifically circuit card assemblies and I/O boxes. The scope includes the repair of NSN 5998-01-473-6138 and NSN 7025-01-660-1320, with option quantities available up to 100 percent for certain items. All work must be performed according to original manufacturer specifications and contractor standard practices, with a delivery requirement of 350 days. Notably, the circuit card assembly is designated as terminal; if declared unserviceable, the contractor is authorized to abandon the item in place and retain parts for reutilization. The contract mandates strict adherence to quality and safety standards, including ISO 9001 quality system requirements and a total prohibition of metallic mercury to prevent corrosion and toxicity on submarines and surface ships. Government-Source Inspection and Acceptance is required, and all items must be marked and packaged according to MIL-STD-129, MIL-STD-130, and MIL-STD-2073. Award consideration is limited to authorized distributors who provide signed proof of authorization. Offers must be submitted by November 27, 2026, and will be evaluated based on item, price, and supplier risk via the Supplier Performance Risk System.
Bare Printed Circuit Board Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332722
New
Federal
DIAPHRAM, PRIMARY
Solicitation # N0010427QXA12
Solicitation N00104-27-Q-XA12 is a Firm-Fixed Price request for quote issued by NAVSUP Weapons Systems Support for the manufacture and procurement of various hardware components, including shaft nuts, flask straps, retaining straps, gaskets, and O-rings. The contract mandates strict adherence to technical data packages and quality standards, specifically requiring non-magnetic inspection per MIL-DTL-19595 and physical identification according to MIL-STD-130. A critical requirement for several items, including the shaft nut (Part B16318-1), is 100% non-destructive production lot testing, which must be conducted at the Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division. Contractors are required to notify the testing activity 30 days prior to shipment and must provide Material Certificates of Conformance for all first article and production lot testing materials. Award consideration is limited to authorized distributors of the original equipment manufacturer, who must provide signed proof of authorization on company letterhead. The government will utilize a single-award selection process where past performance, evaluated via the DoD Supplier Performance Risk System, is weighted more heavily than price. Packaging must comply with MIL-STD-2073-1 for overseas shipments and ASTM D3951-18 for domestic deliveries, with specific oxygen/nitrogen cleaning requirements per MIL-STD-1330 where applicable. The contract is designated as a DO rated order for national defense and incorporates standard DFARS clauses regarding Buy American preferences, cybersecurity safeguarding, and electronic invoicing through the Wide Area WorkFlow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010427QDA04
This solicitation, number N00104-27-Q-DA04, is a request for quotations for the repair and modification of circuit card assemblies, specifically NSN 5998-01-472-4914. The scope of work includes the teardown, evaluation, and repair of these components in accordance with original manufacturer specifications and drawings. Key technical requirements include compliance with ANSI/ESD S20.20 for electrostatic discharge control and MIL-STD-130 for physical identification. The government requires Government Source Inspection and the use of the Commercial Asset Visibility (CAV) system for reporting transactions. Packaging must adhere to MIL-STD-2073-1, and all items must be marked according to MIL-STD-129. The contract is structured as a fixed-price award, with a delivery requirement of 30 days. The Repair Turnaround Time (RTAT) is measured from the physical receipt of the asset at the contractor's facility to the date of government acceptance. Award will be made to a single offeror based on the most advantageous offer, with past performance weighted as more important than price. Evaluation will incorporate the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Payment is processed electronically via the Wide Area Workflow (WAWF) system. The solicitation emphasizes that only authorized distributors of the original manufacturer will be considered for award, requiring signed proof of authorization on company letterhead.
Bare Printed Circuit Board Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 28 days
View Details
NAICS: 334290
New
Federal
58--INDICATOR,DEPTH, IN REPAIR/MODIFICATION OF
Solicitation # N0010427QDA24
This fixed-price solicitation, issued by NAVSUP Weapon Systems Support, seeks a contractor for the teardown, evaluation, and repair of six Depth Indicators (NSN 7HH 5845-01-661-7519). The scope of work requires all repairs to be performed according to the contractor's standard overhaul practices and original manufacturer specifications. The government will make a single award based on a most advantageous determination, prioritizing past performance—evaluated via the DoD Supplier Performance Risk System (SPRS)—over price. Offerors must provide a quote including the unit price, total price, and Repair Turnaround Time (RTAT), and must prove they are an authorized distributor of the original manufacturer's item. The contract mandates strict adherence to quality and logistics standards, including physical identification per MIL-STD-130 and packaging per MIL-STD-2073. All freight is FOB Origin, with delivery destined for the DLA Distribution New Cumberland facility in Pennsylvania. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system using the COMBO document type. Compliance with various federal regulations is required, including Buy American preferences, cybersecurity safeguarding for covered defense information, and the prohibition of hexavalent chromium. The contractor is responsible for all inspection requirements, and accelerated delivery is encouraged at no additional cost to the government.
Other Communications Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 28 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS