Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Valve Hydrostatic Testing and Quality Validation

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Valve Hydrostatic Testing and Quality Validation, involves performing pressure and leak testing for prime contractors on Defense Logistics Agency supply contracts. The scope of work requires conducting hydrostatic testing on four 12-inch gate valves using calibrated equipment to ensure full compliance with drawing specifications. Quality validation must be performed according to MIL-STD-1916 or ASQ H1331 sampling plans, with the final delivery consisting of signed hydrostatic test reports for each individual unit. The project is a total small business set-aside under NAICS code 541380 and will be performed in Norfolk, Virginia. Interested parties must respond by November 2, 2026. This effort is managed by the Department of Defense through the Defense Logistics Agency.

General Info

Hydrostatic testing and quality validation for four 12-inch gate valves in Norfolk, Virginia.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NORFOLK, VA, 23511-0001, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7MC-27-T-1039.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, GATE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs pressure and leak testing for prime contractors on DLA supply contracts. Conducts hydrostatic testing on four 12-inch gate valves using calibrated equipment to ensure compliance with drawing specifications. Validates quality per MIL-STD-1916 or ASQ H1331 sampling plans. Delivers signed hydrostatic test reports for each unit.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Third-Party Dimensional Inspection and CertificationThis subcontract for Third-Party Dimensional Inspection and Certification supports the DLA Weapons Support Aviation Supply Chain by providing independent quality assurance and dimensional verification for prime contractors. The scope of work focuses on verifying Class 3A and 3B threads in accordance with System 22 of FED-STD-H28/20, utilizing sampling plans based on MIL-STD-1916 or ASQ H1331. The selected provider must operate out of an ISO 9001 or SAE AS9003 certified facility and possess the necessary precision gauging tools to deliver detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Cherry Point. Interested parties should note the response deadline of October 30, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Specialized Materials Testing Laboratory (Production Lot Test)This subcontract opportunity is for a Specialized Materials Testing Laboratory to perform Production Lot Testing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider will execute tests according to procurement note E04 to verify the performance standards and material properties of torpedo components, with a specific focus on chemical testing for Otto Fuel compatibility. All work will be performed in Bremerton, Washington, and requires the delivery of formal test reports and certifications of compliance. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certifications and may require JCP certification to access necessary technical data. This requirement falls under NAICS code 541380. Interested parties must submit their responses by November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Aviation Component Quality Inspection & CertificationThe Aviation Component Quality Inspection and Certification subcontract involves providing independent quality assurance and non-conformance testing for prime contractors supporting the DLA Weapons Support ASC. The selected provider will perform rigorous inspections using calibrated micrometers and CMM equipment in accordance with MIL-STD-1916 or ASQ H1331 to ensure zero-nonconformance. Additionally, the contractor is responsible for validating that all marking and packaging meet MIL-STD-129 and MIL-STD-2073-1E standards, ultimately delivering detailed quality inspection reports and certifications of conformance. To be eligible, contractors must hold AS9100 or ISO 9001 certifications and maintain CMMC Level 2 compliance. This opportunity is issued by the Department of Defense under NAICS code 541380. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Thermal Cycling and Environmental Validation TestingThis subcontract for Thermal Cycling and Environmental Validation Testing involves performing environmental stress testing for prime contractors on DLA supply contracts. The scope of work requires validating the performance of observation windows across a temperature range of -55°C to 65°C, executing at least 100 cycles over a two-hour period using environmental test chambers. The testing must verify structural integrity and clarity in accordance with Navy drawing 1582AS124, culminating in the delivery of certified test reports for 18 units. The project is managed under the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Due to the nature of the technical data handling involved, the contractor must maintain CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test services is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected contractor will perform Production Lot Testing for prime contractors on DLA supply contracts to verify the dimensions and material properties of machine thread bushings. All testing must be executed using specialized metrology and testing equipment in strict accordance with government standards, culminating in the delivery of a certified Production Lot Test report. The performance of this contract will take place in New Cumberland, Pennsylvania. Key compliance requirements include maintaining CMMC Level 2 certification and coordinating directly with government inspectors for destination acceptance. Interested parties should note the response deadline of October 30, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

First Article Testing for RF Cable Assemblies

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

First Article Testing and Quality ValidationThis subcontract for First Article Testing and Quality Validation supports the DLA Weapons Support Land Supply Chain by providing initial validation and quality testing for prime contractors. The selected provider is responsible for producing two units for government testing at Robins Air Force Base in Georgia and generating detailed inspection reports for 402 MXSG/MXRILL. The project requires the use of precision measurement and test equipment RT001 and strict adherence to FAR 52.209-4 compliance standards. The final deliverables include the two test units and formal Factory Acceptance Test approval documentation. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract involves providing specialized testing and certification services for the DLA Weapons Support Active Devices Division. The primary objective is to conduct First Article Testing on a single prototype unit to ensure full compliance with MIL-DTL-24231/2E standards. The selected provider must utilize precision measurement and testing equipment and perform quality assurance inspections following either ASQ H1331 or MIL-STD-1916 sampling methods. The project deliverables include the return of the tested First Article Testing unit and a comprehensive First Article Test Report. Performance will take place in Tracy, California, under NAICS code 541380. Interested parties must respond by November 2, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) and Quality InspectionThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC, to provide specialized testing and quality inspection services for aerospace projects. The selected contractor will perform non-destructive testing and dimensional verification for First Article Test units in accordance with MIL-STD-1916 or ASQ H1331 standards. Utilizing CMM and NDT equipment, the contractor is responsible for generating and delivering certified inspection reports for the 402 MXSG/MXRLIM lab. The project is a total small business set-aside under NAICS code 541380, with performance taking place at Robins Air Force Base. Due to the nature of the aerospace work, the contractor must maintain ITAR compliance and meet CMMC Level 2 security requirements. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Critical Application Inspection and Certification ServicesThis subcontract for Critical Application Inspection and Certification Services supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform independent inspection and quality validation for prime contractors on avionics projects, specifically focusing on ensuring zero non-conformance for critical application items. Work is performed in New Cumberland, Pennsylvania, under NAICS code 541380. The scope of work requires conducting sampling and inspections in accordance with MIL-STD-1916 or ASQ H1331. The contractor must verify strict compliance with TDP Rev B Gen 2 and QAP 13873 using calibrated precision test equipment. Final deliverables for these services include detailed inspection reports and Certificates of Conformance.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Third-Party Aerospace Quality Inspection and CertificationThis subcontract for Third-Party Aerospace Quality Inspection and Certification supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform independent verification and inspection of critical flight hardware, utilizing attribute and variable inspection per MIL-STD-1916 and sampling plans per MIL-STD-105/ASQ Z1.4 to ensure zero non-conformance. All measurements must be conducted using calibrated CMM and NIST-standard tools, with the final delivery consisting of detailed inspection reports and Certificates of Conformance. To qualify for this engagement, the contractor must maintain ISO 9001:2015 or SAE AS9003 certification. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Interested parties must submit their responses by the deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Defense Logistics Agency involves providing specialized packaging and marking services for Face Plate Assemblies to support prime contractors on aerospace contracts. The scope of work requires strict adherence to MIL-STD-2073-1E (QWP001) for packaging and MIL-STD-129 for marking, specifically including Special Marking Code 32 to denote a 60-month shelf life. Additionally, the provider must palletize all shipments according to RP001 requirements to ensure they are delivery-ready. The performance of these services will take place in Fort Worth, Texas, under NAICS code 488510. Interested parties should note that the response deadline for this opportunity is October 29, 2026.

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Specialized Material Supply for Face Plate AssemblyThis subcontract involves the supply of raw materials to prime contractors for the manufacture of Face Plate Assemblies under Defense Logistics Agency aerospace contracts. The supplier is responsible for sourcing materials in strict accordance with TDP Rev C Gen 3 and all applicable reference drawings, with a mandatory requirement to ensure that no Class I Ozone Depleting Chemicals are used in the process. The scope of work includes providing comprehensive material certifications and Mill test reports to verify quality and compliance. All certified raw materials must be delivered directly to the designated fabrication facility located in Fort Worth, Texas. This effort falls under NAICS code 332710 and supports Department of Defense aerospace requirements.

POSTED

about 10 hours ago

DEADLINE

Face Plate Assembly ManufacturingThis subcontract for the Defense Logistics Agency involves the precision fabrication and assembly of 121,000 Face Plate Assemblies. The work must be performed in accordance with TDP Rev C Gen 3 and Basic Drawing 81361 806881-05 Rev F, with the place of performance located in Fort Worth, Texas. The scope of work includes the execution of both Contractor First Article Testing and Production Lot Testing to ensure technical compliance. To qualify for this contract, the provider must maintain SAE AS9100 quality systems and hold CMMC Level 2 certification. The project falls under NAICS code 336413 and is managed through the Department of Defense. Interested parties should note the response deadline of October 29, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves providing specialized waterproof, greaseproof, and opaque UV-protected packaging for cylinders to prevent material deterioration. The service provider is responsible for applying all necessary markings, including CAGE codes and part numbers, in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The final deliverable consists of fully packaged and marked cylinders that are ready for immediate shipment.

Motor Vehicle Towing

POSTED

about 10 hours ago

DEADLINE

Oxygen Cleaning and Hydrostatic Testing ServicesThis subcontract for Oxygen Cleaning and Hydrostatic Testing Services supports prime contractors on Defense Logistics Agency Troop Support diving equipment projects. The scope of work involves performing specialized oxygen cleaning, periodic re-hydrotesting, and valve overhauls utilizing hydrostatic pressure testing equipment. All processes must strictly adhere to MIL-STD-1330E standards for the cleaning and packaging of oxygen systems to ensure safety and compliance. The selected provider is responsible for delivering certified clean and hydro-tested cylinders accompanied by detailed test reports. This requirement falls under NAICS code 811310 and is managed through the Department of Defense. Interested parties should note the response deadline of October 28, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 10 hours ago

DEADLINE

Diving Air Cylinder Assembly SupplierThis subcontract involves the supply of five specialized air cylinder assemblies for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 4220-01-451-6470 and Part Number 4059311. Critical compliance requirements include ensuring all assemblies are asbestos-free in accordance with FED-STD-313 and providing a Certificate of Conformance as mandated by FAR 52.246-15. The project falls under NAICS code 332999 and is managed through the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Industrial Wear Coating ServicesThis subcontract for Industrial Wear Coating Services involves the application of specialized wear coatings to four 12-inch gate valves for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work includes surface preparation and coating application in strict accordance with the technical data package, with a specific prohibition on the use of Class I Ozone Depleting Chemicals. Performance will take place in Norfolk, Virginia. The contract is designated as a Total Small Business Set-Aside under NAICS code 332813. To ensure quality and security, the provider must maintain ISO 9001 or AS9003 quality standards and strictly comply with ITAR and EAR export control regulations. Responses to this solicitation are due by November 2, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 10 hours ago

DEADLINE

Gate Valve Casting and FabricationThis small business set-aside subcontract through the Defense Logistics Agency involves the primary manufacture of four 12-inch gate valves for prime contractors. The scope of work includes developing tooling for metal casting, casting valve bodies according to specific basic and reference drawings, and performing precision drilling without the use of sealing compounds. The final deliverable consists of four fully machined and identified valve assemblies. Performance will take place in Norfolk, Virginia, under NAICS code 332510. Due to the handling of ITAR and EAR data, the contractor must maintain CMMC Level 2 and JCP certifications. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

Hardware Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Aviation-Grade Webbing and HardwareThis subcontract involves the supply of high-strength, flame-resistant aviation-grade nylon and polyester webbing along with corrosion-resistant hardware for prime contractors supporting Defense Logistics Agency aviation life support contracts. The materials must be compatible with Interspiro P/N 460-190-457 and include all necessary material certifications and Certificates of Conformance to ensure strict adherence to Berry Amendment compliance. Managed under NAICS code 313210, the contract focuses on the delivery of raw materials and hardware components with performance taking place in San Diego, California. The solicitation was posted on October 22, 2026, with a response deadline set for November 2, 2026.

Broadwoven Fabric Mills

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Oxygen Mask Harness AssembliesThis subcontract involves the fabrication of oxygen mask harness assemblies for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the assembly of NSN 4240-01-392-6079 in strict accordance with Interspiro Inc P/N 460-190-457 specifications. To ensure life-support safety, the contractor must conduct rigorous quality assurance testing and adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The project is governed by NAICS code 339113 and mandates full compliance with Berry Amendment domestic material restrictions. Performance will take place in San Diego, California. Interested parties must respond by November 2, 2026, to provide the completed and tested harness assemblies as required by the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for the Defense Logistics Agency involves providing specialized military-grade packaging, marking, and palletization services for prime contractors. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001:D for palletization. The service provider must utilize MIL-SPEC materials and standardized pallets to ensure all shipments are fully prepared for FOB Origin transport. The opportunity is categorized under NAICS code 493110 and was posted on October 22, 2026, with a response deadline of November 2, 2026. Expertise in DLA packaging standards is mandatory to successfully execute the requirements of this Department of Defense contract.

General Warehousing and Storage

POSTED

about 10 hours ago

DEADLINE

Cellular Plastic Material SupplierThis subcontract opportunity with the Defense Logistics Agency involves the manufacture or sourcing of custom-cut black cellular plastic material, specifically NSN 9330-01-221-1423. The required components must be precision-cut to dimensions of 60 inches in length, 3.5 inches in width, and 0.500 inches in thickness. Qualified suppliers must utilize precision cutting equipment and maintain a CMMC Level 2 Self-Assessment. Strict adherence to the Buy American Act, the Balance of Payments Program, and the Berry Amendment is mandatory for all deliverables. Responses for this requirement are due by November 2, 2026.

Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS