This Solicitation opportunity from Department Of Defense was posted on April 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

VALVE, MECA, PUMP

Closed

SPE4A5-26-T-101VFederal

Submission Closed05/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8EE-26-T-2368

This contract, identified by solicitation number SPE8EE-26-T-2368, involves the procurement of six units of a hose reel frame, classified under NSN 4930-01-515-1356. The acquisition is managed by the Department of Defense through the Defense Logistics Agency and is designated as a critical application item. Specific technical requirements dictate that the items must be provided as blank drumskins without predrilled holes, with the exception of ten dimpled holes that require pilot holes for subsequent assembly. The contract is subject to DLA packaging requirements and includes provisions for covered defense information. Delivery is required within 30 days, with a specified need date of October 1, 2026, and an original required delivery date of June 24, 2027. The items are to be delivered FOB Origin to the DLA Distribution center in Jacksonville, Florida. Packaging must comply with ASTM D3951 and MIL-STD-129 standards, ensuring all marking and labeling meet military specifications. Inspection and acceptance will occur at the destination, and the contractor must adhere to the DLA Master List of Technical and Quality Requirements for all quality control and technical standards.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Centrifugal Pump Unit Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

LOP Fire Protection and Unwatering Pump System

Solicitation # W9127N26QA155

Solicitation W9127N26QA155 is a total small business set-aside for the procurement of a fire protection and unwatering pump system for the Lookout Point Powerhouse in Lane County, Oregon. Issued by the Department of Defense W071 Endist Portland, this firm-fixed-price requirement is necessitated by a deep reservoir drawdown that would otherwise disable critical service water and fire protection systems. The scope of work includes the delivery of a 650 GPM vertical pump/motor assembly, a 0.25 HP jockey pump system, a fire pump controller panel, overload protection, and various piping and fitting components. All equipment must meet AWWA E103 and HI 9.1-9.5 standards, with a delivery deadline of March 1, 2027, shipped FOB destination to Lowell, Oregon. The government will award a single purchase order based on an evaluation of technical compliance, past performance, and price, utilizing the HUBZone price evaluation preference. Offerors must be registered in the System for Award Management under NAICS code 333914 and submit a complete quote package via email to the designated point of contact. The solicitation underwent two amendments, with the final response deadline extended to September 11, 2026. Key contractual requirements include compliance with MIL-STD-129 for marking, DFARS cybersecurity and telecommunications regulations, and specific pump acceptance criteria according to HI ANSI/HI 14.6 grade 2B.

POSTED

DEADLINE

Solicitation # N0010426QBQ38

This solicitation is for the procurement of dirt deflectors under a small-business set-aside, with a response deadline of September 17, 2026. The contract is a fixed-price agreement for supplies delivered FOB-destination, requiring compliance with specific technical documentation, including Individual Repair Part Ordering Data (IRPOD) and various military specifications. Pricing for quotations is generally valid for 60 days following the closing date. Key requirements include strict adherence to the established order of precedence for technical documents and the prohibition of mercury in hardware. Contractors must maintain an acceptable inspection system and follow detailed packaging and cleanliness standards, such as MIL-PRF-23199. Deliverables include a Certificate of Compliance and a cure date certificate submitted at the time of material delivery. The contract also mandates cybersecurity maturity model certification and adherence to specific distribution statements for the safeguarding of technical data.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

120,000-GALLON FUEL SYSTEM SUPPLY POINT (FSSP), Navy Variant

Solicitation # N3943026Q0004

Navfac Systems And Experimental Warfare Ctr

POSTED

DEADLINE

43--PUMP UNIT,CENTRIFUGAL

Solicitation # SPE7M1-26-Q-1479

This solicitation, numbered SPE7M1-26-Q-1479, is issued by the Department of Defense Maritime Supply Chain for the procurement of 30 centrifugal pump units under NSN 4320-01-422-0469. The contract is designated as a Women-Owned Small Business Set-Aside under NAICS code 333914. Delivery is required within 30 days after order, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement incorporates several technical and quality requirements, including DLA packaging standards, the removal of government identification from non-accepted supplies, and a strict prohibition on the use of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the contract mandates compliance with DFARS clause 252.204-7012 regarding the safeguarding of covered defense information. Approved manufacturers and part numbers include entities such as Ampco Pumps Company LLC and Parker Hannifin Corporation.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Reciprocating Hydraulic Pump Assembly Supplier

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Hydraulic Ram Hand Pumps (NSN 4320004923727)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Carver Pump Company Critical Application Item

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Critical Application O-Rings

POSTED

DEADLINE

Supply of Hydraulic Ram Pumps (NSN 4320-00-911-5679)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Reciprocating Pumps (NSN 4320015793952)

MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

This contract pertains to the procurement of a valve, mechanical actuator, and pump with NSN 4320011830001 and part number 393439 manufactured by Eaton Aerospace, LLC, under solicitation SPE4A5-26-T-101V. The item is classified as a critical application item and is designated as a GE PBL item, subject to tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory and supersedes all other standards, including ASTM D3951 for packaging. The item must be packaged and labeled in accordance with MIL-STD-129, palletized per DLA packaging requirements, and delivered FOB origin with zero quantity variance. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with attribute verification levels enforced based on criticality. The item is subject to cybersecurity requirements under CMMC Level 2 self-assessment and must be physically marked as per RQ017. Delivery is due in 176 days from the contract award, with an original required delivery date of July 30, 2026, and a need ship date of October 30, 2026. The delivery address is Tinker AFB, Oklahoma, with transportation governed by DLAD procedural notes, and all unit of issue and packaging must align precisely with contract specifications.

General Info

Procurement of critical GE PBL valve, actuator, and pump per MIL-STD-129, CMMC Level 2, FOB origin, zero variance, due October 30, 2026, to Tinker AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-101V.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 28

Solicitation

Response DeadlineMay 6

Deadline has passed

Submission Closed

05/06/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressUSA

Contacts

Jermaine Brown

contact@example.gov

+1 (555) 000-0000

Full Description

VALVE,MECA,PUMP
VALVE, MECA, PUMP.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
This NIIN has been identified as a GE PBL item. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
EATON AEROSPACE, LLC 62983 P/N 393439
SPE4A5-26-T-101V
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016497837 0001 EA 1.000
NSN/MATERIAL:4320011830001
DELIVERY (IN DAYS):0176
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:10/30/2026 Original Required Delivery Date:07/30/2026
SPE4A5-26-T-101V
SECTION B
PR: 7016497837 PRLI: 0001 CONT’D
SPE4A5-26-T-101V NSN/Part Number: 4320-01-183-0001 Quantity: 1 EA Purchase Request: 7016497837QTY: 1 Delivery: 176 days ADO