Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, REGULATING, FL

Active
SPE7MC-26-T-9057Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of eight regulating valves for fluid pressure control, specifically designed for gas turbine generator bleed air pressure applications within plumbing and electrical ship service systems. The valves must comply with technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or by the RFP issue date for larger acquisitions, unless amended. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for limited functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must feature shockproof construction with a secondary containment barrier in accordance with NAVSEA 5100-003D. The government requires removal of its identification from non-accepted supplies. The item is identified by NSN 4820-01-522-3179 and falls under NAICS code 332912. The solicitation, issued by DLA Dist San Joaquin under number SPE7MC-26-T-9057, was posted on July 28, 2026, with a response deadline of July 31, 2026. Deliveries are due within 119 days after order, and the place of performance is Tracy, CA, 95304-5000, with primary point of contact Erik Geer at erik.geer@dla.mil.

General Info

Procure eight regulating valves for gas turbine bleed air, compliant with DLA standards, mercury-free, NSN 4820-01-522-3179, deliver to Tracy, CA by 119 days post-order.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-9057.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
ERIK GEER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,REGULATING,FL
VALVE, REGULATING, FLUID PRESSURE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
(LIMITING VALVE)
E/I: PLUMBING/ELECTRICAL SHIP SERVICE
GAS TURBINE GENERATOR BLEED AIR PRESSURE
REGULATING VALVE.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR THE NSN/Part Number: 4820-01-522-3179 Quantity: 8 EA Purchase Request: 7015895615QTY: 8 Delivery: 119 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECTThe contract pertains to the procurement of ten units of a linear direct control valve identified by NSN 4820-01-460-6947, with a delivery requirement of 165 days after award. The solicitation, issued under number SPE7MC-26-T-088M by the DLA Dist San Joaquin on behalf of the Department of Defense, closed for responses on July 31, 2026, and is governed by the DLA Master List of Technical and Quality Requirements, which incorporates all referenced R and I numbers as binding specifications. All technical and quality standards referenced within the contract are to be interpreted according to the revision of the Master List in effect on the solicitation issue date, with controls adjusted for amendments in larger acquisitions. Packaging must comply with DLA packaging requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Tracy, California, with a designated point of contact, Paula McClary, reachable via email or phone for inquiries. The NAICS code 332912 indicates the industry classification for other fabricated metal product manufacturing, and the opportunity is open to federal contractors without a specific set-aside designation.
DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract is for the procurement of 19 units of a bronze fluid pressure regulating valve with a 1/2 inch size, identified by the NSN 4820-01-210-8757 and corrected part number U301195701. The item is governed by DLA packaging requirements and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Delivery must be completed within 190 days after award, and the government requires proper identification and handling procedures, including removal of government markings from non-accepted supplies. The solicitation, issued under SPE7MC-26-T-094M, was posted on July 28, 2026, with responses due by July 31, 2026, and is classified under NAICS code 332912 for other fabricated metal product manufacturing. The contracting activity originates from the Department of Defense, specifically the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania, zip 17070-5002. Primary point of contact is Nicole Betts, reachable via email at fmdet1956@dla.mil or phone at 614-692-3506, and the solicitation can be accessed through the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
SERVOVALVE, HYDRAULIThe contract pertains to the procurement of two hydraulic servovalves, part number 22253980 manufactured by Woodward HRT Inc, identified by NSN 1650013246862, under solicitation SPE4A5-26-T-310W. Delivery is required within 20 days of contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at origin, and packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Palletization follows DLA packaging requirements, and the shipment is destined for the Taiwan Army at Zuo-Ying Ammunition Sub in Kaohsiung City. The item is classified as a critical application item with controlled technical and quality inputs referenced from the DLA Master List of Requirements, and compliance with cybersecurity standards is mandated via CMMC Level 2 self-assessment. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes default to major status. The contract stipulates that acceptance requires zero non-conformances in the sample lot unless otherwise directed. Documentation for source approval and removal of government identification from non-accepted items must be completed per applicable provisions. The unit of issue is each, and the item is subject to defense information controls. The solicitation was posted July 28, 2026, with a response deadline of August 5, 2026, and the original required delivery date is July 30, 2026. The point of contact is Jason Balsiger of the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVEThe contract is for the procurement of one STEM fluid valve with NSN 4820-01-508-6185 and part number HBV-M2-14-0008, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-157C. Delivery is required within 20 days of contract award, with the item to be shipped FOB destination to the USS NEW ORLEANS LPD 18 at FPO AP 96673, as specified by the parcel post address. The quantity is fixed at one unit with zero variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 packaging requirements, and all technical and quality standards from the DLA Master List of Technical and Quality Requirements take precedence over any other criteria. The unit of issue is each (EA), with a total price of $1.00, and the item must be delivered no later than July 23, 2026, with the original response deadline for the solicitation set for August 10, 2026. The shipment requires adherence to DLAD Procedure Notes C19 and C20, and government-specific identifiers must be removed from any non-accepted supplies. The vendor must use the VSM system for RDD 777 shipments, and all labeling and marking must reflect the specified U/I and QUP as defined in the contract, with the point of contact being Paula Mcclary at the DLA.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of one regulating valve for fluid pressure, identified by NSN 4820-01-349-9054 and referenced under purchase request 7017644030, with a required delivery within ten days of contract award. The item must be supplied by either Curtiss-Wright Electro-Mechanical Corp or Siemens Government Technologies, with approved part numbers 7378E65 and B1106J23, and must comply fully with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization specified under RP001 and no tolerance permitted for quantity variance. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be shipped to Storck Barracks Building 6503 in Illesheim, Germany, under shipment reference RDD 777 and transportation instructions DLAD PROC NOTE C19 and C20. The contract is governed under solicitation SPE7MC-26-T-156L, issued by the Defense Logistics Agency, with a required delivery date of July 24, 2026, and the point of contact for inquiries is Paula Mcclary at the provided DLA email and phone number.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVEThe contract seeks the procurement of five STEM, FLUID VALVES made of MONEL, identified by NSN 4820-01-200-9426, under Purchase Request 7011613654, with a delivery requirement of 512 days after order. The solicitation is issued under contract number SPE7MC-26-T-096K with a response deadline of July 31, 2026, and was posted on July 28, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by identifiers beginning with R or I, and the applicable revision is determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The valves must comply with all applicable DLA Packaging Requirements for Procurement, and any non-accepted supplies must have government identification removed as specified. The place of performance is Tracy, California, 95304-5000, and the contracting office is DLA Dist San Joaquin under the Department of Defense. Primary point of contact is Nicole Betts, reachable via email and phone. The NAICS code 332912 classifies this as a specialized manufacturing activity within the industrial machinery sector.
DLA DIST SAN JOAQUIN

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, REGULATING, FLThe contract pertains to the procurement of one regulating fluid pressure valve identified by NSN 4820-01-507-0745 and part number 30804995 from Warren Controls, Inc., under solicitation SPE7MC-26-T-157E. Delivery is required within 20 days to two separate military destinations — USS JOHN P. MURTHA LPD 26 and USS ANCHORAGE LPD 23 — with FOB destination terms and no variance allowed in quantity. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization aligned to DLA’s RP001 requirements, and all labeling and marking must adhere to government standards. The DLA Master List of Technical and Quality Requirements takes precedence over any other specification. The valve must not contain or come into direct contact with mercury unless exception applies for functional uses such as batteries, instruments, or weapon systems, and any portable devices containing mercury must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The supply is to be shipped by the fastest traceable means, explicitly prohibiting parcel post. The unit of issue is each, with a unit price of one dollar per unit and a total price of one dollar per line. All deliveries must be routed through designated DLA vendor systems using the provided military freight addresses and traceability codes, and the original required delivery date is July 23, 2026.
Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
MASTER CONTROL ASSEMBLThe contract pertains to the procurement of two units of the Master Control Assembly, Hydraulic, identified by NSN 3895-01-226-6156, under solicitation SPE8EE-26-Q-0409, with a required delivery within 90 days of award. The item is subject to stringent technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the provided DLA website, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact, except where functionally necessary in specified applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; in such cases, portable devices must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all packaging must comply with DLA packaging requirements. The solicitation was posted on July 28, 2026, with responses due by August 4, 2026, and is managed by the Department of Defense under the Construction & Equipment Manu & Con organization, with Chase Quigley designated as the primary point of contact.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332912
New
DIBBS
ADAPTER, TRANSPORTATATIThis contract is for the procurement of four adapters for transportation, identified by NSN 4920-01-128-3121, under solicitation SPE4A5-26-T-310U, issued as a total small business set-aside. The unit price is four dollars per unit, with a total contract value of sixteen dollars. Delivery is required within 164 days, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the origin, and the items must comply with MIL-STD-2073-1E packaging standards, including specific packaging codes, materials, and unit container specifications. Marking must adhere to MIL-STD-129, with no special marking required. Palletization must follow DLA packaging requirements. The adapter is classified as a critical application item, and its design and manufacturing must conform to multiple referenced technical drawings and quality assurance provisions, including revisions dated between 2004 and 2015. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated in the contract. Quality requirements are governed by DLAs Master List of Technical and Quality Requirements, and source approval documentation must be submitted per RC001. The item has no shelf life constraint, and unit identification is not required under DFARS 252.211-7003(c)(1)(i). All equipment used for measurement and testing must meet RT001 standards. Delivery is due by January 17, 2027, with the original required delivery date set for June 19, 2027, and the shipment must be sent to the receiving facility in Texarkana, Texas. The contract includes compliance with DLA transportation and freight procedures C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

New
DIBBS
BATTERY, STORAGEThe contract specifies the procurement of lithium iodine storage batteries under the NSN 6140-01-684-7636, identified as a commercial off-the-shelf (COTS) item with a Type I shelf life of 36 months that is non-extendable. A total quantity of 817 units is required, divided into two line items of 327 and 490 units respectively, to be delivered within 60 days after contract award with a firm fixed price and zero variance tolerance. All items must conform to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including the special marking code 32 for Type I shelf life, and must be palletized according to DLA packaging requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. The batteries are designated as a critical application item, and mercury or mercury-containing compounds are strictly prohibited except in functional batteries, with exceptions strictly controlled under NAVSEA guidelines. Inspection and acceptance occur at the destination, with FOB terms also at destination, and delivery must be made to the designated DLA warehouse in Tracy, California. The contract enforces hazardous material shipping standards and incorporates all applicable technical and quality requirements from the DLA Master List.

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
SEALING COMPOUNDThe sealing compound specified under NSN 8030-01-376-8504 is a Type II, manganese dioxide-cured, high-adhesion sealant conforming to SAE AMS-S-8802F, intended for use in integral fuel tanks and fuel cell cavities, applied by extrusion gun or spatula with a one-hour working time. It is packaged as a one-gallon unit containing 96 fluid ounces of base compound and the necessary curing agent in separate containers, and it requires qualified product list (QPL) status under PRI-QPL-AMS-S-8802, with the manufacturer must be currently approved at the time of contract award. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129R, including the mandatory inclusion of lot or batch numbers and special marking code 33 indicating Type II and shelf life. The item has a nine-month shelf life, extendable in accordance with RS001 requirements. Hazard communication compliance is mandatory, requiring submission of Safety Data Sheets (SDS) and labels per 29 C.F.R. 1910.1200, effective June 1, 2015, and employee training on updated hazard communication standards is required. The product must be delivered FOB destination within 49 days, with zero variance in quantity, and inspection and acceptance occur at the destination. Packaging, marking, and shipping of this hazardous material must adhere to IP025 and DLA packaging requirements, with delivery directed to the designated receiving warehouse in Tracy, California. The solicitation number is SPE8ES-26-T-2461, with a response deadline of August 3, 2026, and the contract is under the NAICS code 325520 for chemical manufacturing.
Adhesive Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details
NAICS: 321114
New
DIBBS
SEALING COMPOUNDThis contract specifies the procurement of a two-part sealing compound with a brown appearance, supplied in 24 tubes of 3.5 ounces each per box, totaling 10 boxes. The compound consists of a white liquid paste base and a dark brown viscous liquid catalyst. It is identified by NSN 8030-01-686-5694 and part number AC-735 B-1/2 from 3M Company. The item has a non-extendable shelf life of nine months, classified as Type I (Code G), and must comply with all relevant DLA packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with special labeling indicating Type I shelf life. Packaging and shipping must adhere to DLA packaging requirements and specific hazardous material guidelines, including IP025 standards. The product must be delivered FOB destination with no variance in quantity, inspected and accepted at the delivery point. The required delivery date is 102 days after award, with an original deadline of November 18, 2026, and the ship date must be no later than November 8, 2026. All hazardous material requirements under the revised OSHA Hazard Communication Standard are enforced, mandating submission of Safety Data Sheets (SDS) and compliant labeling before contract award, along with employee training on the Globally Harmonized System. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with applicable revisions determined by acquisition type and solicitation amendments. The contract includes special marking code 32 for shelf life, palletization per RP001, and adherence to transportation protocols outlined in DLAD PROC NOTES C19 and C20. The delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California, with procurement managed under solicitation SPE8ES-26-T-2424, with a total value of $70,175.86 based on a unit price of $7,017.59 per box. All suppliers must comply with federal procurement regulations and the Department of Defense’s unit of issue and purchase unit specifications.
Wood Preservation

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATINGThis contract specifies the procurement of polyurethane coating in accordance with MIL-PRF-85285E, Type 2, Class H, designed for support equipment applications with a maximum VOC content of 340 grams per liter. The coating is a two-component system consisting of Component A, a pigmented polyester resin and solvent, and Component B, a clear aliphatic isocyanate, supplied as a set totaling two quarts per unit. The finished coating must be gloss gray, conforming to Fed-Std-595 Color Number 16473. The product carries a shelf life of twelve months, extendable under RS001 requirements, and must be labeled with the NSN 8010-01-380-3282 and a lot or batch number per MIL-STD-129. The order quantity is two kits, with delivery required 173 days after order placement. Suppliers must comply with all applicable technical and quality requirements referenced in the DLA Master List, including packaging, labeling, and removal of government identification from non-accepted supplies. Compliance with the updated OSHA Hazard Communication Standard is mandatory, requiring submission of Safety Data Sheets formatted per 29 C.F.R. 1910.1200 and compliant hazard communication labels prior to award. Employee training on these updated safety procedures is required. The product is subject to Covered Defense Information requirements, and all documentation must adhere to the solicitation SPE8ES-26-T-2414, issued on July 22, 2026, with a response deadline of July 28, 2026. The contract is managed by DLA Dist San Joaquin, with performance located in Tracy, California, and inquiries directed to Stephen Ockenhouse at dla-ts-fceb.inquiry@dla.mil.
Paint and Coating Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 325998
New
DIBBS
DECALThis contract issued by the Defense Logistics Agency (DLA) under solicitation number SPE8E6-26-T-3882 pertains to the procurement of 64 units of a Type I shelf-life item identified by NSN 7690-01-617-0384 and part number EP-0010909. The item has a non-extendable shelf life of 24 months and must be packaged in full compliance with MIL-STD-2073-1E, including specific packaging methods, preservation techniques, and marking requirements per MIL-STD-129, with special labeling indicating its Type I shelf-life classification. All packaging and palletization must adhere to DLA’s packaging requirements, and the delivery is FOB origin with no quantity variance allowed. Inspection and acceptance occur at the destination, and the item must be delivered to the specified receiving warehouse in Tracy, California by 146 days after award, with a required ship date of January 4, 2027, and original delivery deadline of February 11, 2027. The unit price is $64.00 per unit, resulting in a total contract value of $4,096.00. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which governs compliance unless amended. Transportation directives reference DLA procedural notes C19 and C20, and the unit of issue is the each (EA). The contractor, INDEPENDENT ROUGH TERRAIN CENTER LLC, must ensure all items are clearly marked and packaged as specified, with government identification removed from non-accepted supplies if applicable. The contract includes special handling and preservation protocols, requiring dry, sealed packaging with no cushioning or dunnage. All deliveries must be addressed to the designated DLA receiving facility in Tracy, CA, and the point of contact for the contract is Tai Nguyen, reachable via phone and email. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, under NAICS code 325998 for other miscellaneous chemical product and preparation manufacturing.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECK
Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThis contract specifies the procurement of 31 safety relief valves with a bronze body, angle-style design, Buna-N O-rings, and 3/4 inch union end connections, rated for a maximum operating pressure of 400 PSI and adjustable pressure settings between 45 and 75 PSI. The item is classified as a critical application part with NSN 4820-01-249-0007 and manufacturer part number BASAA05SDD from Dante Valve Company. The valves must not contain or come into direct contact with mercury or mercury-containing compounds, except for permitted exceptions such as functional mercury in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, and any portable devices containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The valves must be manufactured with casting or forging processes, and if special tooling is required, the supplier must submit a Casting and Forging Assistance Request to DLA. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001, with revisions controlled based on solicitation or award dates. Delivery is specified as FOB origin with a 134-day required delivery timeline ending on April 13, 2027, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including palletization and marking per MIL-STD-129 with no special marking code. The unit of issue is each, with no quantity variance allowed. Inspection and acceptance occur at the destination, with the delivery address being the DLA Distribution San Joaquin warehouse in Tracy, California. Shipping and transportation guidelines follow DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7MC-26-T-156T, with responses due by August 10, 2026, and the item falls under NAICS code 332911. Contact for inquiries is Paula McClary at fmda3302@dla.mil or 614-692-0417.
Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
HEAT DETECTOR ASSEM
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 12 days
View Details
New
DIBBS
PLATE, METAL

POSTED

about 14 hours ago

DEADLINE

in 5 days
View Details