Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, REGULATING, FL

Active
SPE7MC-26-T-168UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of one regulating valve identified by NSN 4820-01-632-3137, with a requirement for delivery within 20 days to the Coastal Riverine Squadron 11 in Seal Beach, California. The item must be furnished FOB origin with no tolerance for quantity variance, inspected and accepted at destination in compliance with military packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129. Packaging must adhere to DLA’s procedural guidelines, including use of approved materials and unit container configurations, and shipment must occur via the fastest traceable means, explicitly excluding parcel post. The valve is subject to strict environmental controls prohibiting the use of ozone-depleting substances in any phase of manufacturing or processing without explicit written approval from the contracting officer, and the intentional introduction of mercury or mercury compounds is banned except in narrowly defined functional applications such as batteries, fluorescent lights, and instrument controls, with additional containment mandated for portable devices. The supply is tied to a specific Ford Motor Company part number, and the procurement falls under a federal solicitation issued by the Defense Logistics Agency, with the contract number SPE7MC-26-T-168U and required delivery date of March 11, 2026. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date. All deliveries must be labeled with the provided special codes and shipped to the designated government address with full traceability maintained throughout transit.

General Info

Procure one NSN 4820-01-632-3137 valve, deliver by March 11, 2026, to Seal Beach, CA, FOB origin, per military packaging and environmental standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

800 SEAL BEACH BLVD, SEAL BEACH, CA, 90740-5607, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-168U for Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,REGULATING,FL
VALVE,REGULATING,FL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FORD MOTOR COMPANY 1NVV8 P/N BC3Z-9C968-A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7MC-26-T-168U
SECTION B
PR: 7015864073 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015864073 0001 EA 1.000
NSN/MATERIAL:4820016323137
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:FA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:D3 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R55823
COASTAL RIVERINE SQUADRON 11
800 SEAL BEACH BLVD
SEAL BEACH CA 90740-5607
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R55823
COASTAL RIVERINE SQUADRON 11
800 SEAL BEACH BLVD
SEAL BEACH CA 90740-5607
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R570926058K756
RDD:
PROJ: LK5 TP 2
SUPP ADD: R55823 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: HR
Need Ship Date:00/00/0000 Original Required Delivery Date:03/11/2026
SPE7MC-26-T-168U
SECTION B
PR: 7015864073 PRLI: 0001 CONT’D

SPE7MC-26-T-168U NSN/Part Number: 4820-01-632-3137 Quantity: 1 EA Purchase Request: 7015864073QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
CARTRIDGE, SAFETY RELIE
Solicitation # SPE7MC-26-T-168Y
The contract specifies the procurement of 17 safety relief cartridges with a cracking pressure set at 300 PSI, identified by NSN 4820-01-056-0209 and manufacturer part number 133097-14 from MEGGITT NORTH HOLLYWOOD INC. Delivery is required FOB origin within 142 days, with no tolerance for quantity variance, and inspection and acceptance must occur at the point of origin. All packaging must comply with ASTM D3951 and be marked and labeled according to MIL-STD-129, with palletization governed by DLA’s RP001 packaging requirements, which take precedence over other standards. The item is classified as a critical application item, and no ozone-depleting chemicals may be used under any circumstances, even if specifications suggest otherwise; any substitute materials require prior approval. Quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R-numbers such as RQ001, RQ002, and RQ009, apply and include configuration change management, inspection at origin, and removal of government identification from non-accepted supplies. A Certificate of Conformance is authorized unless explicitly withheld by a Quality Assurance Letter of Instruction. The delivery destination is Tinker AFB, Oklahoma, with a required ship date of August 28, 2025, and the original delivery deadline is April 10, 2027. The contract was issued under solicitation SPE7MC-26-T-168Y, with point of contact Paula Mcclary, and falls under NAICS code 336310 for aerospace manufacturing.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-917D
The contract pertains to the procurement of one O-ring with National Stock Number 5331016701000, to be delivered within 20 days of order placement, with an original required delivery date of August 3, 2026. The item is subject to stringent packaging requirements mandated by MIL-DTL-117, Type II, Class C, Style 1, which specifies medium duty, waterproof, greaseproof, and opaque packaging to protect against UV degradation, applicable to all direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must adhere to MIL-STD-2073-1E for preservation and containerization and MIL-STD-129 for labeling, including the special marking code “20 – Do not bend,” with barcoding in compliance with DoD standards. Palletization follows DLA’s RP001 packaging requirements, and shipment must be executed via traceable means, excluding parcel post, to the specified delivery address in Johnston, Iowa. The contract is FOB origin, with inspection and acceptance occurring at destination, and all pricing is fixed at $86.00 per unit, with additional line items totaling $712.00, though context for non-O-ring items remains unclear. The solicitation number is SPE7L1-26-T-917D, issued by the Defense Logistics Agency under the Department of Defense, with mandatory electronic submission via DIBBS by August 17, 2026. The contract incorporates numerous FAR and DFARS clauses covering cybersecurity, safeguarding covered defense information, combating trafficking, employment verification, hazardous material handling, export control, electronic invoicing through WAWF, and restrictions on procurement from Communist Chinese military companies. It also includes clauses related to NIST SP 800-171 compliance, equal opportunity, subcontracting for commercial items, and prohibition of hexavalent chromium. All packaging, marking, and shipping of hazardous materials must align with IP025 and 29 CFR 1910.1200, and the contractor is required to submit hazardous material labels for review. No options, modifications, or delivery schedules beyond the 20-day window are specified, and the contractor must comply with all representation and certification requirements under Section K, including UEI and CAGE code disclosure, though no specific offeror responses are included. Funding, accounting data, and payment office details are not
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-921T
The contract pertains to the procurement of 77 O-RINGS with NSN 5331-01-643-1760, issued under solicitation number SPE7L1-26-T-921T by the Department of Defense through the Land Supply Chain. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment dates. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed per RQ011. Documentation for source approval requests must follow RC001 guidelines, and covered defense information protocols may apply under RD003. Delivery is required within 20 days of award, with performance location set in Baltimore, Maryland, 21226-5000. Responses are due by August 17, 2026, and the primary point of contact is Kristina Derry, reachable via email and phone provided. The NAICS code is 336310, and the solicitation is open to federal entities.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
PARTS KIT, FUEL TANK
Solicitation # SPE7L1-26-T-917P
The contract specifies the procurement of a Parts Kit for a Fuel Tank, with a quantity of 113 units identified by NSN 2910-01-292-3253 and purchase request number 7016266849. Delivery is required within 49 days after delivery order issuance, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The item falls under NAICS code 336310 and is managed by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and all supplies must have government identification removed if rejected. The contract is subject to Covered Defense Information rules and mandates CMMC Level 2 certification for third-party assessors. Technical data associated with this item is export-controlled under ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, including subsidiaries and overseas employees, and is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The place of performance is Anniston, Alabama, 36201-4199, with Rita Hughes of DLA listed as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
LINKAGE KIT, VALVE
Solicitation # SPE7MC-26-T-168P
The contract is for the procurement of a Linkage Kit, Valve, identified by NSN 4820-21-913-2483 and part numbers 861017-92 and LK637, under solicitation SPE7MC-26-T-168P, with a total quantity of 16 kits. It is a total small business set-aside under NAICS code 336310, and all items are designated as critical application items for aircraft appliances and equipment. The contract strictly prohibits the use of class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents. Mercury-containing portable lamps and instruments must be shock-proof and include a secondary containment boundary per NAVSEA 5100-003D. All items must be preserved and packaged in accordance with MIL-STD-2073-1E, Appendix D, for kits, and marked per MIL-STD-129 with no special marking required. Packaging must comply with DLA’s procurement requirements and palletization standards. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The required delivery date is 128 days from award, with a ship date of March 5, 2024, and the final delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The unit of issue is KT, and the procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with David Shivers as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CONTROLLER, FUEL PUM
Solicitation # SPE4A5-26-T-332L
The contract is for the procurement of four Fuel Pump Controllers, part number 4951737 with NSN 2910017328093, issued under solicitation SPE4A5-26-T-332L by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The delivery must be completed within 20 days of contract award, with goods shipped FOB origin and no tolerance for quantity variance, meaning exactly four units must be delivered. Inspection and acceptance both occur at the destination, which is Assault Craft Unit 4 at Building 3821, 2155 11th Street, Virginia Beach, VA 23459-3018. All packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containerization, and labeling must adhere to MIL-STD-129 without special markings. Palletization follows DLA’s RP001 packaging requirements, and shipments must be sent by the fastest traceable means, explicitly excluding parcel post. The required delivery date is July 10, 2026, and the contract includes detailed government-use codes for tracking, distribution, and fulfillment. Contact for this solicitation is Chelesea Fleming, with phone and email provided for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
LOCKING DEVICE, VALV
Solicitation # SPE7M2-26-T-6045
The contract pertains to the procurement of 100 units of a locking device for a valve, identified by NSN 4820-01-418-4030, under solicitation SPE7M2-26-T-6045. Delivery is required within 127 days after award, and full and open competition is applicable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Any configuration changes require formal engineering change proposals or variance requests, and non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export control under ITAR or EAR, and access is restricted to contractors certified under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and been formally approved. The item is classified under NAICS code 336310 and is procured by the Department of Defense’s Nuclear Reactor Program with performance located in New Cumberland, Pennsylvania. Proposals must be submitted by August 17, 2026, and point of contact is David Larsen at david.larsen@dla.mil.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
IMPELLER, WATER PUMP
Solicitation # SPE7L5-26-T-4759
The contract pertains to the procurement of seven water pump impellers, identified by NSN 2930-41-000-6579, under solicitation SPE7L5-26-T-4759, issued by the Department of Defense through the Land Supplier Opns Engines office. Delivery is required 53 days after order placement, with a firm need ship date of October 10, 2026, to the designated receiving warehouse in Tracy, California. The contract operates on a fixed-price basis with FOB origin terms, and the unit price is set at $7.00 per unit, resulting in a total contract value of $49.00. The impellers must be packaged and labeled in strict compliance with MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and DLA’s RP001 packaging requirements for palletization, with DLA’s Master List of Technical and Quality Requirements overriding any conflicting standards. Inspection and acceptance occur at the destination, and all shipments must be accompanied by proper documentation compliant with WAWF for electronic invoicing and receiving reports. The contract includes numerous FAR and DFARS clauses addressing cybersecurity, small business representation, subcontracting, safety, hazardous materials, export controls, and information safeguarding, including mandatory compliance with NIST SP 800-171 and DFARS 252.204-7012 for covered defense information. Offerors must provide their Unique Entity Identifier and CAGE Code, and certify their small business status or socioeconomic program qualifications, such as 8(a), HUBZone, WOSB, or SDVOSB. All quotations must be submitted electronically via the DLA Internet Bid Board System by August 17, 2026, and the contract incorporates provisions for changes, default, and unenforceable obligations under federal acquisition regulations. The item is noncommercial, and the government retains the right to audit compliance with all technical, packaging, and regulatory stipulations, with nonconforming supplies subject to rejection and removal from government custody.
LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
VALVE, FUEL SYSTEM
Solicitation # SPE7L1-26-T-917B
The contract is for the procurement of two fuel system valves, identified by NSN 2910016681633 and part number 8M0121389, supplied by Brunswick Corp under solicitation SPE7L1-26-T-917B. Delivery is required within 20 days to the NAVSCOLEOD facility in Niceville, Florida, with shipment to be made by the fastest traceable means, excluding parcel post. The items are to be delivered FOB origin with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with palletization governed by DLA packaging standards. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with applicable revisions tied to the solicitation or award date depending on acquisition size. The unit price and total cost are not specified in the provided text, and the original required delivery date is August 3, 2026. The contract is managed under DoD unit of issue protocols, and all government-specific codes, including IPD, DIC, and FREIGHT SHIPPING ADDRESS, are for official use only. Point of contact is Kristina Derry of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
STARTER, ENGINE, ELEC
Solicitation # SPE7LX-26-U-9332
This contract solicitation pertains to the procurement of electric engine starters identified by NSN 2920010696997 under a Service-Disabled Veteran-Owned Small Business Set-Aside, with an estimated quantity of 146 units and a contract ceiling of $350,000. The delivery is to be made FOB origin within 191 days, with inspection and acceptance occurring at the destination point within the continental United States. Packaging must strictly adhere to MIL-STD-2073-1E with specific preservation methods, including clean and dry conditions without desiccants or vapor corrosion inhibitors, and marking must conform to MIL-STD-129, including 2D Data Matrix barcoding for NSN, lot, and quantity data. Palletization must comply with DLA’s RP001 packaging requirements. The product must satisfy technical and quality specifications referenced through R-numbers from the DLA Master List of Technical and Quality Requirements, and is governed by CID A-A-59294. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. All deliveries are subject to a zero variance in quantity, with no option or range provisions beyond the estimated quantity. The contract is structured as an indefinite-delivery contract, and invoicing must be submitted via WAWF. Technical compliance is enforced through clauses detailing configuration change management, notification of safety issues, and cybersecurity safeguarding under NIST SP 800-171 and basic safeguarding requirements, with deviations applied to several FAR clauses. Hazard communication standards under OSHA 29 CFR 1910.1200 apply, requiring submission of Safety Data Sheets prior to award and compliance with labeling protocols. Offerors must provide valid UEI and CAGE codes and self-certify as an SDVOSB, and must comply with clauses prohibiting unauthorized obligations, ensuring accelerated payments to small business subcontractors, and preventing the use of internal confidentiality agreements that restrict disclosures. The contract includes clauses for changes under fixed-price terms, pricing modifications, subcontracting commercial products, and payment levies, with no firm minimum order guaranteed beyond the estimated quantity. Technical data and documentation are subject to government rights for use, reproduction, and disclosure. The award will be made through DIBBS, with all submissions required electronically on or before August 20, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, METERING
Solicitation # SPE7L1-26-T-917F
The contract is for the procurement of 20 units of a fuel metering pump, identified by NSN 2910-01-642-2712 and part number 36002064 from Volvo Penta of the Americas Inc, under solicitation SPE7L1-26-T-917F. This is a total small business set-aside with a NAICS code of 336310, and all supplies must comply with DLA packaging requirements and technical standards referenced from the DLA Master List of Technical and Quality Requirements. The item is classified as a commercial off-the-shelf product with adequate catalog data available for evaluation, and government identification must be removed from non-accepted supplies. Delivery is required within 20 days of award, shipped FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E with specific preservation and wrapping methods, and marking must follow MIL-STD-129 without special codes. Palletization adheres to DLA packaging guidelines, and shipping must be conducted via the fastest traceable method—parcel post is prohibited. The delivery address is the U.S. Coast Guard Surface Forces Logistics Center in Baltimore, Maryland, and the required delivery date is August 3, 2026. The contract includes detailed logistical and administrative codes for government use and is managed by the Department of Defense’s Land Supply Chain under point of contact Kristina Derry.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-303M
This contract pertains to the procurement of an O-ring identified by NSN 5331-01-183-0990, with a quantity of 4,720 units to be delivered FOB origin within 238 days from the contract award, with a required ship date of April 13, 2027, and an original delivery deadline of December 25, 2027. The item is classified as a commercial item and a critical application component with a non-extendable shelf life of 180 months, classified as Type I (Code Y). It must comply with stringent technical and quality standards including SAE AS83461/1C and SAE AMS-P-83461, and the manufacturer must be approved on the Qualified Products List at the time of award. The O-ring is subject to zero-defect sampling requirements under MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring a verification level of VII or AQL of 0.1. The material must be free of asbestos and must not contain or come into contact with mercury or mercury compounds, except for specified functional exceptions like certain instruments or sensors. All bare items must be marked with the contract number SPE7M4-26-T-303M, including the NAWC cage code and part number as specified on associated drawings. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with intermediate containers conforming to MIL-P-4861, and final packaging in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1. The item must also meet NAVAIR traceability requirements for aircraft launch and recovery equipment. Delivery is to be made to DLA Distribution Red River in Texarkana, Texas, with inspection and acceptance occurring at the destination. The unit of issue is each, and no variance in quantity is permitted. The contract is governed by DLA packaging and procurement requirements, and the supplier must comply with all applicable quality assurance provisions and technical data packages referenced in the contract.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CUI Safeguarding)This contract requires the implementation of basic cybersecurity controls to protect covered contractor information systems that handle controlled uncontrolled information in accordance with DFARS requirements. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond. The North American Industry Classification System code 541512 indicates the scope pertains to custom computer programming services, aligning the technical effort with cybersecurity compliance activities. The performance location is designated as FPO with a zip code of 96661, reflecting a military postal address typically used for overseas or expeditionary operations. All work must be completed in support of the Defense Logistics Agency, a component of the Department of Defense, with the requirement to ensure that systems storing or processing CUI meet federal cybersecurity standards. The proposal response deadline is August 17, 2026, with the solicitation posted on August 5, 2026, providing a twelve-day window for submissions through the DIBBS platform.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication & Labeling Compliance SupportThe contract involves the preparation and submission of hazard communication labels and Material Safety Data Sheets for a safety relief valve, ensuring full compliance with OSHA and DFARS regulations. This effort is critical to safeguarding personnel and meeting federal safety standards for hazardous materials handling and labeling. The work must be completed in accordance with detailed regulatory frameworks that govern the accurate dissemination of chemical hazard information to users and responders. This is a subcontract under a Total Small Business Set-Aside, classified under NAICS code 541690, and is being managed by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026. Performance will be conducted at an FPO address with ZIP code 96661, indicating potential overseas or military logistical coordination. The requirement emphasizes timely, accurate documentation aligned with federal compliance mandates, with the expectation that the small business submitter has the technical expertise to meet both OSHA’s HazCom standard and DFARS-specific defense acquisition guidelines.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
Commercial Safety Relief Valve SupplyThe contract is for the supply and delivery of a commercial off-the-shelf safety relief valve identified by NSN 4820013387425, requiring full compliance with federal and defense specifications. It is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, as defined by FAR 19.5. The North American Industry Classification System code 332911 indicates the procurement falls under Other Fabricated Metal Product Manufacturing. The Department of Defense, through the Defense Logistics Agency, is the overseeing agency, with performance required at a military postal address in FPO with ZIP code 96661. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026, with the opportunity accessible through the DIBBS online portal.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
Supply of 2.000 KT Adhesive Kits (NSN: 8040005261910)
Adhesive Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332312
New
DIBBS
Structural Steel FabricationThe contract titled Structural Steel Fabrication is a subcontract issued by the Defense Logistics Agency under the Department of Defense for the fabrication and detailing of structural steel members intended for use in buildings, bridges, or platforms. It is categorized under NAICS code 332312, which specifically encompasses structural metal fabrication. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, indicating a tight window for proposals. Performance of the work is required at Cherry Point, North Carolina, with the ZIP code 28533-0021 designated as the official place of performance. There is no set-aside designation specified for this opportunity, meaning it is open to all eligible contractors without restrictions based on business size or other classifications. The contract was posted through the DIBBS system, and interested parties must access the full details via the provided UI link to submit responses or seek further information. No point of contact details are listed in the public data, so inquiries must be handled through the designated procurement portal.
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete SupplyThe contract is for the supply of ready-mix concrete to a project site at Cherry Point, North Carolina, with specific technical requirements including defined slump, compressive strength, and the inclusion of approved admixtures to ensure performance under project conditions. The solicitation is issued under the NAICS code 327320 and is classified as a subcontract, with the Defense Logistics Agency acting on behalf of the Department of Defense as the contracting organization. All deliveries must meet the exacting standards mandated by the project, and failure to comply with the specified material properties could result in rejection or contract penalties. The opportunity was posted on August 5, 2026, with a response deadline of August 13, 2026, limiting the timeframe for potential suppliers to submit proposals. The place of performance is strictly designated to the Cherry Point location with zip code 28533-0021, indicating that logistics and delivery scheduling must be optimized for this geographic constraint. No set-aside designation is specified, meaning the contract is open to all eligible vendors regardless of business size or status. Interested parties must access the official DIBBS portal via the provided link to obtain detailed specifications and submit responses in accordance with procurement guidelines.
Ready-Mix Concrete Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Heavy Hauling and Equipment TransportThe contract titled Heavy Hauling and Equipment Transport is a subcontract issued by the Defense Logistics Agency under the Department of Defense for the transportation of heavy construction equipment, materials, and oversized loads to and from the Cherry Point location with zip code 28533-0021. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and is classified under NAICS code 484220, which pertains to truck transportation of heavy and irregular loads. The place of performance is specifically designated to Cherry Point, indicating that all transport activities must be coordinated to and from this site. No set aside provisions or organization type details are specified, and no point of contact information is provided within the contract data. Interested parties must respond through the official DIBBS portal using the provided link prior to the deadline to be considered for award.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Environmental Compliance and MonitoringThe contract pertains to environmental compliance and monitoring activities focused on stormwater management, erosion control, and regulatory adherence during construction operations at Cherry Point, North Carolina, with a ZIP code of 28533-0021. It is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 541620, which designates environmental consulting services. The work involves continuous oversight to ensure that all construction activities meet federal, state, and local environmental regulations, particularly those related to water quality protection and soil stabilization. Monitoring will include routine inspections, documentation of best management practices, reporting of non-compliance issues, and coordination with regulatory authorities as needed. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, indicating a tight timeline for qualified vendors to submit proposals. The contract does not specify any set-aside status or target demographics for participation, meaning it is open to all eligible subcontractors. Performance is localized to the Cherry Point area, requiring on-site presence and familiarity with regional environmental conditions and regulatory frameworks. The contractor must be prepared to implement and maintain an effective environmental management plan throughout the construction lifecycle, with an emphasis on preventing pollution incidents and ensuring timely compliance reporting to avoid penalties or work stoppages.
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Site LayoutThis contract involves topographic surveys, boundary verification, and the precise layout of structures and infrastructure to support defense-related projects. The work is designated as a subcontract under the NAICS code 541370, which pertains to surveying and mapping services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and performance is required at Cherry Point, North Carolina, with the ZIP code 28533-0021. All surveying activities must meet high accuracy standards to ensure proper alignment and placement of facilities and infrastructure critical to military operations. The contract does not specify a set-aside designation or point of contact, and details are accessible through the provided DIBBS portal link.
Surveying and Mapping (except Geophysical) Services

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 237310
New
DIBBS
Roadway Paving and AsphaltThe contract involves grading, base preparation, and asphalt paving for roads, parking lots, and accessways under the NAICS code 237310, classified as a subcontract with the Defense Logistics Agency within the Department of Defense. Performance is required at Cherry Point, North Carolina, with a zip code of 28533-0021, and the solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026. All work must meet the technical and quality standards expected for military and government infrastructure, and bidders are expected to comply with any applicable federal regulations governing construction and procurement. The place of performance is fixed, and successful proposers will be responsible for mobilizing equipment, sourcing materials, and completing the scope within the project timeline.
Highway, Street, and Bridge Construction

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238110
New
DIBBS
Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement specifies the requirement for forming, reinforcing, and pouring concrete to construct foundations, slabs, walls, and other structural elements at Cherry Point, North Carolina, with a zip code of 28533-0021. This is a subcontract under the NAICS code 238110, which corresponds to concrete work, and is solicited by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, indicating a brief window for interested parties to submit proposals. The place of performance is clearly defined, and while no point of contact or set-aside details are provided, the scope of work centers on essential structural concrete operations critical to defense infrastructure projects. All work must comply with the technical and quality standards expected for military construction, and submissions must be made through the designated DIBBS portal prior to the deadline.
Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping SystemsThe contract pertains to the installation of potable water, drainage, and gas piping systems within commercial or industrial facilities, under a subcontract classification with NAICS code 238220 for plumbing, heating, and air-conditioning contractors. The work is scoped for performance at Cherry Point, North Carolina, with a zip code of 28533-0021, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, leaving a limited window for potential subcontractors to submit proposals. All systems must meet stringent operational and safety standards appropriate for defense-related infrastructure, and the successful bidder will be responsible for full compliance with applicable codes and regulations governing utility installation in federal facilities.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details