Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, REGULATING, FL

Active
SPE7MC-26-T-164LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of a fluid pressure regulating valve, identified by NSN 4820-01-490-5956 and part numbers 035289 and 085174 from SAUER COMPRESSORS USA, INC., with a quantity of six units to be delivered within 158 days under solicitation SPE7MC-26-T-164L. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item is classified as a critical application component, and strict packaging requirements mandate compliance with MIL-STD-2073-1E and MIL-STD-129, using unit containers D3 and packaging code U, with no special marking required. All packaging and preservation methods must exclude mercury or mercury compounds, consistent with IP056 and NAVSEA 5100-003D, except where functional use in batteries, lighting, instruments, sensors, weapon systems, or specified chemical reagents is explicitly permitted. Transportation and delivery are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original delivery deadline set for May 4, 2027, though the need ship date is January 19, 2027. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is each (EA), with a单价 of $6.00 and total value of $36.00, and all compliance obligations are tied to federal procurement standards under the Department of Defense.

General Info

Six fluid pressure valves ordered under DLA solicitation, FOB origin, delivery to New Cumberland by Jan 19, 2027, at $6 each.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7MC-26-T-164L for Maritime Hardware/Electrical

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,REGULATING,FL
VALVE, REGULATING, FLUID PRESSURE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
USED ON COMPRESSOR MODEL WP5000.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
SAUER COMPRESSORS USA, INC. 1KWT0 P/N 035289
SAUER COMPRESSORS USA, INC. 1KWT0 P/N 085174 ITEM NO.94
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017601502 0001 EA 6.000
NSN/MATERIAL:4820014905956
DELIVERY (IN DAYS):0158
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7MC-26-T-164L
SECTION B
PR: 7017601502 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/19/2027 Original Required Delivery Date:05/04/2027
SPE7MC-26-T-164L NSN/Part Number: 4820-01-490-5956 Quantity: 6 EA Purchase Request: 7017601502QTY: 6 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7MC-26-T-163W
The contract specifies the procurement of a safety relief valve with NSN 4820013397280 and a corresponding first article test item identified by NSN 0001S00000053, under solicitation SPE7MC-26-T-163W. The valve is designated as a critical application item with Class 3 threads and must comply with stringent technical and quality requirements referenced from the DLA Master List, including mandatory adherence to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances required for acceptance unless otherwise stated. All products are prohibited from containing Class I ozone-depleting chemicals, with any substitute materials requiring prior approval. Packaging and preservation must strictly follow MIL-STD-2073-1E and the special packaging instruction SPI AM12563146 dated 08/28/2024, with marking conforming to MIL-STD-129 and palletization per DLA packaging directives. The contract mandates inspection and acceptance at origin, with delivery required FOB origin within 331 days, and a strict zero variance in quantity allowed. The first article test requirement is outlined as a separate line item with a quantity of one unit, though the actual number of units to be tested is defined in FAR clauses and must be cited by offerors; failure to price this line item results in an assumed no-cost provision. The contract is a total small business set-aside under NAICS 332911, with delivery directed to the DLA Distribution San Joaquin warehouse in Tracy, CA, and all contractual obligations are governed by the revision dates and amendments referenced in the applicable technical documentation and drawings, including the latest drawing revision dated 08/28/2024.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-163V
This contract specifies the procurement of a safety relief valve rated for 3800 PSI, designated as a critical application item with restricted sourcing requiring government engineering approval. The item must comply with stringent DLA technical and quality requirements referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit packing strictly as defined. The valve is sourced exclusively from approved vendors including Anderson Greenwood LP, Emerson Automation Solutions, and Joy Global Underground Mining LLC, with the exact part number 0330-A01-KC3800 or equivalent. The contract includes a firm fixed price of $6.00 per unit for a total of six units, with no variance allowed in quantity. Delivery is required FOB origin, with inspection and acceptance occurring at destination after a 201-day delivery window, targeting March 3, 2027. The item is identified by NSN 4820-00-718-3026 and falls under NAICS code 332911. All packaging and shipping must follow DLA procedures including the specified freight address in Tracy, California. The contract prohibits removal of government identification from non-accepted supplies and may involve covered defense information subject to applicable controls.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-163R
The contract specifies the procurement of a single ball valve with NSN 4820-01-707-6576 and part number 21B3ET-SWO-200-02CB from ALLOY VALVES & CONTROL, INC., under solicitation SPE7MC-26-T-163R. The item must be delivered within 213 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the valve must not contain any Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by specifications. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, using designated methods and materials, and palletization must adhere to DLA packaging standards. The valve is to be inspected and accepted at the destination point, and transportation logistics follow DLA procedural guidelines C19 and C20. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, under NAICS code 332911, indicating classification for other fabricated metal product manufacturing. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with Paula McClary listed as the primary point of contact. The unit of issue is each (EA), and the total price reflects a single unit at the listed unit price. No special marking is required beyond standard MIL-STD-129 compliance, and the designated shipping and delivery address is consistent with the DLA distribution center in Pennsylvania. The required delivery date is March 15, 2027, aligning with the original need date and confirming the strict adherence to timeline requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
BALL, VALVE, PORTED
Solicitation # SPE7MC-26-T-164G
The contract pertains to the procurement of two ported ball valves, identified by NSN 4820014178455 and part number HBV-WF3-14-0007-05, supplied by B N L Industries Inc, under solicitation SPE7MC-26-T-164G. The total contract value is $2.00 for the two units, with delivery required 144 days after order placement, no later than February 22, 2027, and FOB origin terms apply. All items must be delivered to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, and are subject to final inspection and acceptance at the destination. Packaging must strictly comply with MIL-STD-2073-1E, including air evacuation preservation, plastic film wrapping, and use of D3 unit containers and E5 intermediate containers, with no cushioning or preservative materials needed. Marking must adhere to MIL-STD-129 with no special codes required, and palletization must follow DLA’s RP001 packaging requirements. The valve is designated as a critical application item, and the contract prohibits the use of class I ozone-depleting chemicals, as well as any intentional addition of mercury or mercury-containing compounds except in specific exempted applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-specified reagents; portable devices containing mercury must include a second containment barrier and be shock-proof per NAVSEA 5100-003D. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and all representations and certifications must be submitted via the DIBBS portal by August 13, 2026. The contract includes numerous FAR and DFARS clauses covering equal opportunity, combating trafficking, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards including NIST SP 800-171, prohibition of hexavalent chromium, export control, electronic invoicing via WAWF, and restrictions on covered defense telecommunications equipment from Communist Chinese military companies. Payment must be processed electronically through WAWF using the DD 1155 form, and the Unique Entity ID (UEI) and CAGE code of the vendor must be provided. No quantity variance
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-26-T-244D
The contract pertains to the procurement of four safety relief valves identified by NSN 4820-99-373-6251 and part numbers G406/8058 and G406/8058/1611, supplied by KNDS Defence UK Limited and BOSCH REXROTH LTD. Delivery is required within five days of order, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must comply strictly with the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. The use of Class I ozone-depleting chemicals is prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 requirements. Shipping must be via the fastest traceable means, excluding parcel post, to the designated DLA depot in Texarkana, Texas. The contract is issued under solicitation SPE7M1-26-T-244D with an original required delivery date of June 29, 2026, and the unit of issue is each, priced at $4.00 per unit. The item is designated as critical for application, and all markings and documentation must include the government-controlled identifiers and codes provided in the contract.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-26-T-244E
This contract specifies the procurement of four safety relief valves with NSN 4820-99-225-8756 under solicitation SPE7M1-26-T-244E, with a required delivery within five days of award. The valves are classified as critical application items and must be supplied by approved vendors, including BOSCH REXROTH LTD and KNDS DEFENCE UK LIMITED with designated part numbers. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements, and mandates that any substitute chemicals be pre-approved unless explicitly authorized. All packaging, marking, and labeling must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements and the DLA Master List of Technical and Quality Requirements taking absolute precedence. The item must be shipped FOB origin using the fastest traceable means, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 in Texarkana, Texas. The quantity is fixed with zero variance allowed, and inspection and acceptance occur at the destination. The contract reference includes a purchase request number, unit price of $4.00 per unit, and total price of $16.00, with a required delivery date of June 29, 2026. All documentation must include the prescribed government markings, shipping identifiers, and project codes, and the point of contact for inquiries is Misty Eckard with the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-164B
This contract is for the procurement of 15 check valves identified by NSN 4820-01-684-6568 and part number 40639-082 from Hutchinson Industries, Inc., under solicitation SPE7MC-26-T-164B. Delivery is required in 158 days to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards, including ASTM D3951. Packaging must follow MIL-STD-129 labeling and RP001 DLA packaging requirements, with palletization conforming to specified guidelines. The use of ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional components like batteries, fluorescent lights, weapon systems, or NAVSEA-specified reagents; even then, portable devices containing mercury must be shock-proof and feature a secondary containment per NAVSEA 5100-003D. Unit of issue is each, priced at $15.00, with a total contract value of $225.00. The contract enforces compliance with all applicable DoD procurement and transportation directives, including DLAD Proc Notes C19 and C20, and requires adherence to DLA-defined unit of issue standards. The original delivery deadline is June 18, 2027, with a need ship date of January 19, 2027, and the contracting office is located at DLA Dist San Joaquin with primary contact Paula McClary.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-164P
The contract specifies the procurement of a safety relief valve with a bronze body, a pressure setting range of 13 to 23 PSI, and a maximum pressure rating of 400 PSI, identified by part number BASAA03SBB and NSN 4820-01-433-9858. Manufacturing is to be accomplished via metal casting, requiring specialized tooling, and suppliers must coordinate with DLA’s Aviation or Land & Maritime Supply Chains for tooling and material sourcing. The item is designated as a critical application item, and strict compliance with DLA packaging, marking, and preservation requirements is mandatory, including adherence to MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for limited functional uses under specific naval exceptions, which must include secondary containment. The contract requires delivery of 30 units within 121 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and zero variance tolerance on quantity. Packaging must use approved preservation methods and materials, with no hazardous substances permitted. The contract is issued under solicitation SPE7MC-26-T-164P, with a response deadline of August 13, 2026, and is governed by applicable DLA technical and quality standards referenced from the DLA Master List.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-163T
The contract specifies the procurement of two valve disks and valve poppets with part number 155952-0001 and 155952-1 from Marotta Controls Inc, identified by the NSN 4820-00-959-9854 under solicitation SPE7MC-26-T-163T. Delivery is required within 158 days, with goods to be shipped FOB origin and no variance allowed in quantity. All items must comply with DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific packaging methods, containment codes, and identification markings in accordance with MIL-STD-129. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address designated for freight shipping. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at destination, and the items are classified as critical application items. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the original required delivery date is April 21, 2027, though the needed ship date is set for January 19, 2027. Unit of issue is each, with a total price of $2.00 per unit, and NAICS code 332911 applies. All packaging, marking, and transportation must adhere to DLA procedural notes C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-163X
The contract pertains to the procurement of two check valves, part number CAV5841SSVT.500SS with NSN 4820-01-536-0829, under solicitation SPE7MC-26-T-163X, issued by the Department of Defense through the DDSP New Cumberland Facility. The unit price is $2.00 per unit, totaling $4.00 for the two required units, with delivery mandated within 188 days from the award date and FOB origin. No variance in quantity is permitted, with inspection and acceptance occurring at the destination. The valves must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. Packaging must adhere strictly to MIL-STD-129 labeling and DLA Packaging Requirements, including palletization as defined in RP001, and all items must be prepared for delivery in accordance with these standards. The delivery destination is specified as the DDSP New Cumberland Facility in Pennsylvania, with the same address used for freight shipping. The need ship date and original delivery date are both February 18, 2027, and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract also includes provisions for handling covered defense information and requires removal of government identification from non-accepted supplies.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7L1-26-T-904T
This contract pertains to the procurement of a fluid pressure regulating valve, identified by NSN 4810017019717 and part number 825C-10043 from Meritor Specialty Products LLC, with a quantity of three units required. Delivery is mandated within 46 days from the contract award, with shipment made FOB origin and inspection and acceptance occurring at the destination. Strict packaging requirements are enforced per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and container specifications, with palletization aligned to DLA packaging standards. The item is classified as a critical application item, subject to zero tolerance for quantity variance. All materials and processes must comply with prohibitions on mercury and mercury-containing compounds, except for specified functional exceptions such as batteries and sensors as defined by NAVSEA, and portable devices must include secondary containment. Additionally, Class I ozone-depleting chemicals are strictly banned from use in any part of the product, preservation, packaging, or marking, with approved substitutes requiring prior authorization. The delivery address is the DLA Distribution facility in New Cumberland, PA, and transportation logistics are governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE7L1-26-T-904T, with technical and quality criteria referenced from the DLA Master List, and all compliance obligations override any conflicting specification provisions.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-163N
The contract is for the procurement of five butterfly valves, each identified by the NSN 4820014220509 and specified to meet MIL-DTL-24624A Revision A, with a critical application status requiring strict compliance with technical and quality standards. Each valve is priced at $4,995.00, resulting in a total contract value of $24,975, with no variance allowed in quantity—exactly one unit per contract line item. Delivery is required within 20 days of the requested order, with a firm required delivery date of August 3, 2026, and all shipments must be delivered FOB destination to the USS STETHEM DDG 63 at FPO AP 96678. Inspection and acceptance both occur at the destination, with the government retaining full authority to verify conformance. Packaging must strictly adhere to MIL-STD-2073-1E, including dry preservation methods, fiber wrap, moisture barrier bags, and specific container types, while palletization must follow DLA’s RP001 standard. Marking is required per MIL-STD-129 with machine-readable barcodes and no special markings. The use of parcel post is prohibited, and vendors must ship via the fastest traceable means using the provided TCN and RDD codes, avoiding conventional mail. The valves fall under the NAICS code 332911 and are procured by the Defense Logistics Agency under solicitation SPE7MC-26-T-163N. Contract administration is governed by a suite of FAR and DFARS clauses, including those related to inspection, changes, payment acceleration for small businesses, safeguarding controlled unclassified information, and compliance with NIST SP 800-171. The offeror must provide accurate representations regarding its size status, socioeconomic certifications, and compliance with defense telecommunications equipment restrictions, and must submit hazard labels and MSDS for any hazardous materials. Payment must be submitted via WAWF, and all deliveries are subject to final government acceptance at the delivery point. No option quantities, extensions, or IDIQ structures are included; this is a firm fixed-price, non-commercial acquisition with no authorized quantities beyond the five units specified.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4534
This contract specifies the procurement of 13 battery chargers under NSN 6130-01-681-7918 with a total quantity of 13 units to be delivered FOB destination within 131 days, by December 23, 2026. The product is identified as the NOCO Company model GB500 with part number 54095, and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. Packaging and palletization must adhere to DLA packaging requirements, with no quantity variance permitted. Inspection and acceptance occur at the destination, and all items must be marked according to specified protocols, including the use of special marking codes and compliance with hazardous materials shipping procedures. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampling unless otherwise stated. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by solicitation or award dates depending on acquisition size. The contract includes detailed shipping instructions to the DLA Distribution facility in New Cumberland, Pennsylvania, and references applicable DLA procedural notes for transportation. All requirements are tied to the solicitation number SPE7L7-26-T-4534 and subject to DLA’s official unit of issue guidelines.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
VALVE, AIR SHUTDOWN
Solicitation # SPE7MC-26-T-163U
The contract is for the procurement of four air shutdown valves with NSN 4820-15-011-3048 and part number 057.08007-REV 3.0 from ISOTTA FRASCHINI MOTORI SPA, supplied under solicitation SPE7MC-26-T-163U. The valves must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which is incorporated by reference and controlled by the revision in effect on the solicitation issue date. Delivery is required FOB origin within 158 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit containment codes, with marking in accordance with MIL-STD-129 and no special marking required. Palletization must follow DLA packaging standards, and the delivery address is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The purchase price is $4.00 per unit, totaling $16.00 for the four units. The solicitation was posted on August 2, 2026, with a response deadline of August 13, 2026, and the contract falls under NAICS code 336310 for aerospace product and parts manufacturing. The point of contact is Paula Mcclary, reachable via email and phone.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7MC-26-T-164H
The contract is for the procurement of a linear directional control valve, identified by NSN 4820-01-646-2864 and part number NF3PAN52ON00000, with a quantity of nine units to be delivered FOB origin within 191 days, with a required ship date of February 21, 2027. The product must comply with all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and DLA packaging standards including MIL-STD-129 marking with no special marking codes. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve unless part of functional components like batteries, sensors, or instruments as specified by NAVSEA, and any portable devices containing mercury must have shock-proof construction and a second containment boundary per NAVSEA 5100-003D. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation and shipping instructions governed by DLA procedural notes C19 and C20. The purchase request number is 7017696020 with a unit price of $9.00 per unit, totaling $81.00, and the contract solicitation number is SPE7MC-26-T-164H with a response deadline of August 13, 2026. All supplies must be furnished without government identification if not accepted, and the contract is subject to zero tolerance for quantity variance.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-163Z
The contract is for a DISK, VALVE with a NSN of 4820-01-387-9567 and a quantity of two units, under solicitation number SPE7MC-26-T-163Z. The item is a 10,000-inch diameter disk assembly made of nickel alloy, designed for use with gas, oil, or water media, and must be supplied by a CMMC Level 2 certified third-party assessment organization. All technical data associated with the item is subject to export controls under either ITAR or EAR, meaning any disclosure or transfer to foreign persons, regardless of location, requires prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program credential, have completed required DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. The delivery deadline is 158 days after award, with the place of performance located in New Cumberland, Pennsylvania, and the award is managed by the Department of Defense through the DDA New Cumberland Facility. The solicitation was posted on August 2, 2026, with bids due by August 13, 2026, and the NAICS code is 332911 for other miscellaneous fabricated metal product manufacturing.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
ADAPTER, BATTERY CHA
Solicitation # SPE7L7-26-T-4537
This contract pertains to the procurement of 13 units of a commercial off-the-shelf battery charger adapter, identified by part number BTA-70100-148 and NSN 6130-01-706-9251, manufactured by BREN-TRONICS DEFENSE LLC. The item is classified as COTS with adequate catalog data available for evaluation, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede any conflicting standards. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified in the contract, and attribute classifications must adhere to predefined verification levels or AQLs. All packaging must conform to MIL-STD-129 and ASTM D3951, with palletization following DLA’s RP001 packaging requirements, and all items must be properly marked and labeled per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the full quantity of 13 units must be delivered within 115 days of contract award, with no variance permitted in quantity. The sole delivery point is the DLA Distribution facility at DDSP New Cumberland, Pennsylvania, as specified in the parcel post and freight shipping addresses. The unit of issue is each (EA), and the total contract value is based on a unit price of $13.00 per item. The procurement follows DoD unit of issue standards and is subject to DLA procedural notes C19 and C20 regarding transportation. The solicitation was issued under SPE7L7-26-T-4537 with a response deadline of August 13, 2026, and the required ship date is December 7, 2026, with the coverage of Covered Defense Information potentially applying per RD003.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-163Y
The contract pertains to the procurement of a DISK, VALVE assembly with NSN 4820-01-388-0662, comprising a hinge, washer, nut, pin, and disk, with a total quantity of 11 units to be delivered within 225 days of award. The solicitation, issued under number SPE7MC-26-T-163Y and posted on August 2, 2026, with a response deadline of August 13, 2026, is classified under NAICS code 332911 and is managed by the Department of Defense’s DDSP New Cumberland Facility. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to export control under ITAR or EAR, restricting disclosure of technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 applies. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training and questionnaires, and explicit approval from DLA. The point of contact for inquiries is Paula Mcclary, reachable via email and phone provided.
Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4533
The contract is for the procurement of 78 units of a charger and battery with NSN 6130-01-706-1846 under solicitation SPE7L7-26-T-4533, issued by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 52 days of award, with FOB origin terms, and inspection and acceptance will occur at the destination. The unit of issue is each (EA), with a fixed quantity and zero variance allowed. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 packaging guidelines, with all items marked and labeled accordingly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned corresponding verification levels. Physical identification of individual items must adhere to RQ017 requirements. The delivery destination is DLA Distribution at 2083 Normandy Drive, New Cumberland, PA, with a required ship date of October 5, 2026. Payment is set at $78.00 per unit, totaling $6,084.00, and the procurement is subject to all applicable DLA transportation and logistics directives including DLAD PROC NOTES C19 and C20.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details