Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, REGULATING, SY

Active
SPE7MC-26-T-165XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a regulating valve, identified by NSN 4820-01-593-5882 and part number 207392-01G from Griswold Industries, with a quantity of three units required. Delivery is to be made FOB origin within 157 days, with inspection and acceptance occurring at the destination facility located at DLA Dist San Joaquin in Tracy, California. The unit of issue is each, with no variance permitted in quantity, and packaging must comply with ASTM D3951 while adhering strictly to MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging requirements. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. The contract, issued under solicitation SPE7MC-26-T-165X, was posted on August 3, 2026, with responses due by August 14, 2026, and is classified under NAICS code 333618. The original required delivery date is April 15, 2027, with a need ship date of January 19, 2027. Transportation procedures follow DLAD Proc Notes C19 and C20, and primary point of contact is Paula McClary, reachable via email and phone provided.

General Info

Procure three regulating valves NSN 4820-01-593-5882, FOB origin, deliver to Tracy CA by April 15, 2027, per DLA specs.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

333618 - Other Engine Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-165X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,REGULATING,SY
VALVE,REGULATING,SY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
GRISWOLD INDUSTRIES 86184 P/N 207392 ASSY 207392-01G
GRISWOLD INDUSTRIES 86184 P/N 207392-01G
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017602046 0001 EA 3.000
NSN/MATERIAL:4820015935882
DELIVERY (IN DAYS):0157
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7MC-26-T-165X
SECTION B
PR: 7017602046 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/19/2027 Original Required Delivery Date:04/15/2027
SPE7MC-26-T-165X NSN/Part Number: 4820-01-593-5882 Quantity: 3 EA Purchase Request: 7017602046QTY: 3 Delivery: 157 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333618
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9143
This contract is for the procurement of fluid filter elements under an indefinite-delivery contract with a one-year period of availability, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The item is identified by NSN 2940-01-670-6510 and part number 4268224 from Parker-Hannifin Corporation, with an estimated quantity of 3,377 units, though the actual quantity is not firm and subject to delivery orders. All deliveries must be completed within 65 days after the order date, with FOB origin terms requiring transport to a contiguous U.S. location. Packaging must strictly follow ASTM D3951 and MIL-STD-129 for marking, labeling, and palletization, with DLA’s Master List of Technical and Quality Requirements taking precedence. The contract mandates compliance with hazardous material labeling standards under 29 CFR 1910.1200 and requires submission of Safety Data Sheets prior to award, with ongoing updates if materials change. Inspection and acceptance occur at the destination, with the contractor responsible for meeting all quality and packaging standards. The solicitation is a Total Small Business Set-Aside under FAR 19.5 with NAICS code 333618, requiring offerors to affirmatively represent their size and socioeconomic status, including 8(a), HUBZone, WOSB, EDWOSB, or SDVOSB certifications, and to disclose UEI and CAGE codes for themselves and any subcontractors providing covered defense equipment or services. Contractors must adhere to a comprehensive set of FAR and DFARS clauses governing subcontracting, cybersecurity, safeguarding covered defense information, contract modifications, payment obligations, and whistleblower protections, with multiple deviations applied to key clauses including those related to NIST SP 800-171, safeguarding contractor information systems, and simplified acquisition procedures. Invoicing must be submitted electronically through WAWF, and no physical submissions are permitted. The maximum contract value is capped at $350,000, with no unit pricing provided in the solicitation, making the contract an open-ended vehicle for future orders subject to socioeconomic compliance and technical acceptability. The contract also incorporates requirements for non-acceptance of government identification on rejected supplies, cyber incident reporting, and prohibitions on acquiring certain defense telecommunications equipment.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
MOTOR ASSEMBLY, ELEC
Solicitation # SPE7M1-26-T-248H
This contract is for the procurement of one electric motor assembly identified by NSN 6105-01-700-3079 and part number EC-23050-22, supplied by BREEZE-EASTERN LLC under solicitation SPE7M1-26-T-248H. The item is to be delivered within 157 days from the contract award date, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. No quantity variance is permitted, and the product must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes applied. Palletization must adhere to DLA packaging requirements, and all units must be shipped to the specified address at the DDSP New Cumberland Facility in Pennsylvania. The contract strictly prohibits the use of Class I ozone-depleting chemicals in the manufacturing or incorporation of the item, overriding any conflicting specification requirements, and requires prior approval for any substitute chemicals unless explicitly authorized. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The unit of issue is each (EA), with a total price of $1.00, and the required delivery date is April 19, 2028, with an initial need date of January 19, 2027. Transportation and shipping logistics are governed by DLA procedural notes C19 and C20, and the primary point of contact for inquiries is Michael Reese at the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-909V
This contract specifies the procurement of 92 O-RINGS with NSN/Part Number 5331-01-721-6739 under solicitation SPE7L1-26-T-909V, with a response deadline of August 14, 2026, and a delivery requirement of three days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and all supplies must be free of asbestos and Class I ozone-depleting chemicals, with any substitutions requiring prior approval unless explicitly authorized by specifications. Government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, PA, 17070-5002, and the contract is managed by the Department of Defense’s Land Supply Chain under NAICS code 333618. Primary point of contact is Kelly Day, reachable at kelly.day@dla.mil or 614-693-9944.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTA
Solicitation # SPE7L1-26-T-909H
This contract specifies the procurement of a commercial off-the-shelf filter element identified by NSN 2940-99-304-1205 and part number 333/D2696, supplied by J.C. BAMFORD EXCAVATORS LIMITED. Four units are required to be delivered within 78 days to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB origin terms with zero variance in quantity. The item must comply with all technical and quality requirements referenced from the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited, requiring approval for any substitute chemicals. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific preservation, wrapping, and container codes applied, and palletization must follow DLA packaging guidelines. Inspection and acceptance occur at the destination, and all markings must conform to the designated standards without special codes. The delivery is scheduled for November 1, 2026, under solicitation SPE7L1-26-T-909H, issued by the Department of Defense’s Land Supply Chain, with Craig King listed as the primary point of contact. The unit of issue is each, with a total contract value of $16.00, and all transportation details reference DLA procedural notes.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
COVER ASSY, HANDHOLE
Solicitation # SPE7L4-26-T-5755
The contract is for the procurement of three units of a cover assembly, handhole safety, intended for use on electro systems, with the NSN 2815-01-093-0909 and part number 8381095 from Motive Diesel Engine Model 8-12-16567CRLL. Delivery is required within 168 days after award, with a need ship date of January 19, 2027, and a required delivery date of January 22, 2027. All items must be delivered FOB origin to the Distribution Depot Puget Sound in Bremerton, Washington, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the Government will handle all evaluation and acceptance processes. Packaging must adhere strictly to MIL-STD-2073-1E, with preservation method 10, wrap material JA, unit container E5, intermediate container DO, and pack code U. Palletization must follow DLA’s RP001 requirements. Marking is governed by MIL-STD-129 with no special marking required, and configuration control complies with MIL-STD-973, excluding specific subParagraphs. Item identification is marked according to MIL-STD-130 section 5.3.1 A through D. Mercury and mercury-containing compounds are prohibited unless used in functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable fluorescent lamps and instruments containing mercury must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates deviation 2026-O0038 for clauses related to combating trafficking in persons, employment eligibility verification, sustainable products, and hazardous material identification. The contractor must comply with FAR and DFARS clauses for hazard communication under 29 CFR 1910.1200, provide Safety Data Sheets, and ensure all hazardous materials are properly labeled. Electrical invoicing must be completed through WAWF, and the contractor must possess a valid Unique Entity ID and CAGE code. The solicitation number is SPE7L4-26-T-5755, issued by the Department of Defense under NAICS code 333618, with proposals submitted electronically via DIBBS by August 6, 2026
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
HOUSING, STATOR
Solicitation # SPE7LX-26-U-9186
The contract pertains to the procurement of Housing, Stator with NSN 2805-01-611-5557 and part number 5007560, under solicitation SPE7LX-26-U-9186, issued as a Total Small Business Set-Aside under NAICS code 333618. The requirement calls for 32 units to be delivered FOB origin within 120 days, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence and mandate adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement and the Unit of Issue is each, with a unit price of $32.00. The contract specifies that government identification must be removed from non-accepted supplies and all packaging must reflect the correct Unit of Issue and Quantity per Unit Pack as defined in the purchase order. This is a DLA Direct, CONUS delivery contract, and the solicitation was issued with a response deadline in August 2026, managed by the Strategic Acquisition Program Directorate of the Department of Defense, with Theodore Misiolek designated as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
PUMP, COOLING SYSTEM
Solicitation # SPE7L1-26-T-908D
The contract is for the procurement of two cooling system pumps with NSN 2930-01-690-4063 and part number 3325408, issued under solicitation SPE7L1-26-T-908D as a Total Small Business Set-Aside. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, Fort Eustis, Virginia, and all items must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA packaging requirements. The DLA Master List of Technical and Quality Requirements takes precedence over any conflicting specifications. The use of ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds are banned unless explicitly exempted for functional components such as batteries, fluorescent lights, or specified instrumentation, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. All substitutions for banned materials require prior approval. The shipment must be sent via the fastest traceable means, excluding parcel post, with delivery addressed to Fort Eustis, VA, and marked with the designated tracking number. The required delivery date is August 8, 2025, under a small business set-aside with the NAICS code 333618, and the primary point of contact is Kristina Derry of the Department of Defense Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7LX-26-U-9214
This contract pertains to the procurement of a filter element, designated by NSN 2940-01-566-4165 and part number 48138563, with a quantity of 693 units to be delivered FOB origin within 62 days. The contract is issued under solicitation SPE7LX-26-U-9214 by the Department of Defense’s Strategic Acquisition Program Directorate, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with unit packaging and palletization strictly adhering to specified guidelines. The unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at the destination point. The contract explicitly prohibits the removal of government identification from non-accepted supplies and requires all packaging to be marked accordingly. Pricing is set at a unit price of $693.00, with a total value of $480,249.00, and delivery is subject to the DLA direct, CONUS coverage. The contract information is accessible via DIBBS, with primary point of contact Theodore Misiolek for inquiries.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-909Z
This contract is for the supply of an O-RING identified by NSN 5331-01-722-6445 and part number M-6568, with a quantity of 12 units to be delivered within 80 days under solicitation SPE7L1-26-T-909Z. The item is classified as a commercial off-the-shelf (COTS) critical application component and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-DTL-117 Type II, Class C, Style 1 specifications, requiring medium-duty, waterproof, greaseproof, and opaque bagging to protect against UV deterioration, applicable to direct vendor delivery, foreign military sales, and stock shipments. Supply chain traceability documentation must be retained by the contractor per DLA Procurement Note C03 (August 2016), and no ozone-depleting chemicals may be used in any part of the product. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries, sensors, or specified instruments, in which case portable fluorescent lamps and instruments must contain a secondary containment boundary as mandated by NAVSEA 5100-003D. All markings and packaging must conform to MIL-STD-129 and RP001 packaging requirements, with delivery fob origin to the designated warehouse in Tracy, California. The unit of issue is each (EA), priced at $12.00 per unit, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The contract prohibits the use of covered defense information without proper safeguards and mandates compliance with all applicable DoD transportation and freight guidelines.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
NOZZLE, FUEL INJECTI
Solicitation # SPE7L5-26-T-4600
This contract pertains to the procurement of fuel injection nozzles identified by part numbers EX56907500004/87, EX56907500006/87, and X00028337/87, supplied by ROLLS-ROYCE SOLUTIONS AMERICA INC and MTU Friedrichshafen GmbH, respectively. The item is cataloged under NSN 2910-12-386-4658 with a requirement for 11 units, each unit being a single assembly. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override all other specifications including ASTM D3951, and packaging must comply with MIL-STD-129 for marking and labeling. All packaging and palletization must conform to DLA’s RP001 requirements, and no government identification may be removed from non-accepted supplies. Delivery is to be made FOB origin in 168 days to the designated DLA Distribution facility in San Diego, California, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination point, and the required ship date is January 19, 2027, with an original delivery deadline of July 13, 2027. Transportation logistics follow DLAD Proc Notes C19 and C20, and the unit of issue is strictly defined per the contract. The solicitation number is SPE7L5-26-T-4600, with a response deadline of August 3, 2026, and is issued under NAICS code 333618 by the Department of Defense’s Land Supplier Operations Engines. Primary point of contact is Paul Doerfler, reachable via email and phone provided.
LAND SUPPLIER OPNS ENGINES

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
BRACKET, ENGINE MOUN
Solicitation # SPE7L1-26-T-858L
The contract specifies the procurement of one bracket for an engine mount, identified by NSN 2510-01-535-5219 and part number 106A0049, under solicitation SPE7L1-26-T-858L. The item is to be delivered within five days to Joint Base Elmendorf-Richardson in Alaska, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specified methods for preservation, wrapping, and containerization, and marking must adhere to MIL-STD-129 with no special marking code required. The delivery is designated for the U.S. Army maintenance unit at the specified address, with transportation governed by DLAD procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers, with compliance determined by the revision in effect on the solicitation or award date. The item is classified under NAICS 333618 and is part of a federal procurement under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the point of contact. The original required delivery date is July 22, 2026, and the solicitation response deadline is August 3, 2026.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333618
New
DIBBS
GUARD, MUFFLER-EXHAU
Solicitation # SPE7LX-26-U-9218
The contract pertains to the procurement of a GUARD, MUFFLER-EXHAU with NSN 2990-01-648-4458, for a quantity of five units, under solicitation SPE7LX-26-U-9218. The item is subject to full and open competition as a Total Small Business Set-Aside, with delivery required within 104 days FOB origin, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, MIL-STD-129 labeling, and DLA’s Packaging Requirements for Procurement, with all DLA Master List of Technical and Quality Requirements taking precedence. The unit of issue is each, and the item must be palletized according to DLA specifications. The contract emphasizes compliance with all referenced DLA technical and quality standards incorporated by reference through R and I numbers, and suppliers must remove any government identification from non-accepted supplies. The procurement is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact, and responses are due by August 18, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 333515
New
DIBBS
FILE, ROTARY
Solicitation # SPE8E5-26-T-3681
The contract solicitation SPE8E5-26-T-3681 is for the procurement of 1,828 rotary files with the NSN 3455-01-051-1387, specified as tungsten carbide, double cut fluting, with a quarter-inch shank diameter, three-eighths-inch cutter head diameter, and three-quarter-inch cutter head length. The item must comply with the DLA Master List of Technical and Quality Requirements referenced in RA001, which supersede all other standards including ASTM D3951, and must be manufactured in accordance with CID A-A-51146C Revision C dated 04/11/2022. All packaging must adhere to ASTM D3951 while meeting the more stringent DLA RP001 packaging and palletization requirements, and all labels and markings must conform to MIL-STD-129, including proper barcoding for NSN, lot number, quantity, unit of issue, and quantity per unit pack. The product is to be delivered FOB origin to the designated receiving location in Tracy, California, with delivery required 167 days after award, by January 18, 2027, and inspections and acceptances are to occur at the destination. Pricing is fixed at $1.00 per unit, totaling $1,828.00, with no variance allowed in quantity. The contract mandates compliance with multiple FAR and DFARS clauses including those on employment eligibility verification, combating human trafficking, sustainable products, hazardous materials identification, cybersecurity safeguards, cyber incident reporting, prohibition of hexavalent chromium and covered defense telecommunications equipment, export control, and electronic invoicing via WAWF. Offerors must represent their size status as other than small and submit unique entity identifiers and CAGE codes. Compliance with NIST SP 800-171 is required for protecting covered defense information, and all shipments must be traceable through proper labeling and documentation. The solicitation closes on August 6, 2026, with submissions required through the DLA Internet Bid Board System, and no paper or alternative media submissions are permitted.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BALL VALVE
Solicitation # SPE7MC-26-T-145Q
The contract is for the procurement of a Parts Kit, Ball Valve identified by NSN 4820014156638, with a quantity of five units to be delivered FOB destination to the Defense Logistics Agency Distribution San Joaquin in Tracy, California. Delivery is required within 168 days of the contract award, with the original delivery date set for March 8, 2027, and a need ship date of January 19, 2027. The item must be packaged in full compliance with MIL-STD-2073-1E Appendix D for kits, utilizing preservation method CLNG/DRY:1, packaging code U, and intermediate container E5 as specified. Marking and labeling must adhere strictly to MIL-STD-129, including standardized data matrix and linear barcodes that display the NSN, contract number, lot or serial number, and delivery address. No special marking is required. The contract prohibits the intentional addition of mercury or mercury-containing compounds into the hardware except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical agents specified by NAVSEA, with portable fluorescent lamps and instruments requiring shock-proof design and a secondary containment boundary as per NAVSEA 5100-003D. The item is designated as a critical application item for Crane Pumps & Systems PFT Corp, part number 076307 and 082755. Inspection and acceptance occur at the destination, and the contractor must ensure compliance with all applicable federal, defense, and environmental regulations including the safeguarding of covered defense information per NIST SP 800-171, prohibition of hexavalent chromium, and restrictions on the use of telecommunications equipment from designated Chinese military companies. The contractor must also comply with employment eligibility verification, combating human trafficking, equal opportunity for workers with disabilities, and sustainable product requirements, all under Deviation 2026-00038. All payment requests must be submitted electronically through Wide Area WorkFlow, and the contract incorporates clauses on changes, default, unenforceability of unauthorized obligations, and accelerated small business subcontractor payments. The solicitation was issued on August 3, 2026, with a response deadline of August 6, 2026, using simplified acquisition procedures under NAICS code 332911. The contract does not specify unit
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
BINOCULAR
Solicitation # SPE7L7-26-T-4549
This contract specifies the procurement of 113 units of Nikon 7x50 CF WP Global Compass binoculars under solicitation SPE7L7-26-T-4549, issued by DLA District San Joaquin for the U.S. Department of Defense. The items are classified as a critical application item with a Type I shelf life of 60 months, non-extendable, and must comply with strict technical and quality standards referenced from the DLA Master List, including packaging per MIL-STD-2073-1E and marking per MIL-STD-129 with a special code for delicate instruments. The binoculars feature rubber coating, a built-in compass and reticle, waterproof and nitrogen-sealed housing, light-alloy construction, and EBC-coated optics with 95 percent light transmission, and are shipped with two alkaline manganese dioxide batteries. Mercury or mercury-containing compounds are strictly prohibited except for specific functional uses such as batteries or instruments as defined by NAVSEA, with additional containment requirements for portable devices. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be verified at assigned levels. Delivery is FOB origin with a 144-day delivery window and zero tolerance for quantity variance, with inspection and acceptance occurring at the destination warehouse in Tracy, California. The contract is set aside for Women-Owned Small Businesses under NAICS code 333310, with pricing at $113.00 per unit for a total of $12,769.00.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326111
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-3812
The contract requires the procurement of 84 fire extinguishers under NSN 4210016083387 and part number 429011, supplied by TYCO FIRE PRODUCTS LP, with a unit price of $84.00 and a total value of $7,056. Delivery is due within 37 days after contract award, with FOB destination and no variance allowed in quantity. Inspection and acceptance occur at the destination warehouse in Tracy, California, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA packaging standards and special marking requirements. Hazardous materials handling is governed by OSHA’s updated Hazard Communication Standard effective June 1, 2015, requiring suppliers to submit Safety Data Sheets and compliant labels following 29 C.F.R. 1910.1200, along with employee training on these requirements. The supplier must also adhere to DLA’s technical and quality requirements referenced via the DLA Master List, and shipping instructions must follow DLAD Proc Notes C19 and C20. The required delivery date is November 11, 2026, with a need ship date of July 26, 2026, under solicitation SPE8E6-26-T-3812, issued by the Department of Defense through DLA District San Joaquin, and point of contact is John Lieb.
Plastics Bag and Pouch Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333415
New
DIBBS
VALVE PLATE ASSEMBL
Solicitation # SPE8E8-26-T-4830
The contract pertains to the procurement of a Valve Plate Assembly identified by NSN 4130-00-830-7676 and Part Number 5H40-120A, with a quantity of 26 units to be delivered FOB origin within 167 days of contract award. The item is subject to strict packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container types, with all marking required to comply with MIL-STD-129 and no special marking codes applied. Delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California, and inspection and acceptance occur at the destination. The contract prohibits any intentional introduction of mercury or mercury-containing compounds into the hardware except under narrowly defined exceptions such as functional uses in batteries, lighting, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendment dates. The purchase request number is 7017585202, unit price is $26.00, and total contract value is $676.00. The solicitation was issued under contract number SPE8E8-26-T-4830 with a response deadline of August 3, 2026, and is classified under NAICS code 333415. All materials must adhere to DoD unit of issue standards and government identification removal protocols for non-accepted supplies.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333998
New
DIBBS
EXTINGUISHER, FIRE
Solicitation # SPE8E6-26-T-3962
The contract is for the procurement of 21 fire extinguishers under NSN 4210-01-505-2274, with a unit price of $21.00 and a total contract value of $441.00. Deliveries are required within 57 days and must be shipped FOB destination to the receiving warehouse in Tracy, California, with no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including special marking and palletization per DLA packaging requirements. The extinguishers are classified as hazardous material under 49 CFR Division 2.2, requiring adherence to IP025 regulations for hazardous materials handling. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled based on solicitation and award dates. The contract is issued under solicitation SPE8E6-26-T-3962, with a response deadline in August 2026 and a required delivery date of September 3, 2026. The supplier is identified as Tyco Fire Products LP, and all communications and shipments must reference the provided parcel post and freight addresses.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, FL
Solicitation # SPE7MC-26-T-4686
The contract is for the procurement of five thousand units of a fluid pressure regulating valve, identified by the NSN 4820-01-725-1475, under purchase request 7013878933. The solicitation number is SPE7MC-26-T-4686, issued by the DLA Dist San Joaquin under the Department of Defense, with a posting date of August 3, 2026, and a response deadline of August 6, 2026. The NAICS code 332911 indicates the classification falls under other fabricated metal product manufacturing. Delivery is required within 42 days after award, and the place of performance is listed as Tracy, California, with a zip code of 95304-5000. The primary point of contact for inquiries is Chad Zernis, reachable via email at chad.zernis@dla.mil or by phone at 614-668-7466. The solicitation is a federal opportunity with no specified set-aside designation, open to general industry competition.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, DOUBLE
Solicitation # SPE8E8-26-T-4779
The contract is for the procurement of 38 units of a double faucet with NSN 4510-00-483-5639 under purchase request 7017586143, with a delivery deadline of 167 days after award. The solicitation, numbered SPE8E8-26-T-4779, was posted on July 22, 2026, and bids are due by August 3, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. All supplies must comply with DLA packaging requirements and government identification must be removed from non-accepted items. The contract falls under NAICS code 332913 and is managed by the DLA San Joaquin office under the Department of Defense, with performance location in Tracy, California, 95304-5000. Primary point of contact is Alexis Selby, reachable via email and phone provided.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
HEAD, VALVE
Solicitation # SPE7MC-26-T-153G
The contract pertains to the procurement of 15 HEAD, VALVE units with NSN 4810016857158 under solicitation SPE7MC-26-T-153G, a total small business set-aside with NAICS code 332911. Delivery is required to the DLA Land and Maritime facility in Tracy, California, with an original delivery date of March 1, 2027, and a need ship date of January 19, 2027, for a total lead time of 168 days under FOB Origin terms. The item is classified as a critical application component for aircraft wheel and brake systems, requiring strict adherence to military packaging standards MIL-STD-2073-1E and marking standards MIL-STD-129. Packaging must use noncorrosive plastic plugs to seal product openings, avoid cushioning materials, and be palletized per DLA Packaging Requirements RP001, with preservation method 31 (dry). Prohibitions include the use of mercury compounds, Class I ozone-depleting chemicals, and any contamination that could affect operational integrity. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i), but bare item marking is mandatory as per RQ017. The product must meet tailored higher-level quality requirements including configuration change management, use of calibrated measuring and test equipment, and compliance with ISO 9001:2015 or equivalent. All hazardous materials must be labeled per OSHA’s Hazard Communication Standard and DFARS 252.223-7001 with Safety Data Sheets submitted for approval prior to award. Invoicing is mandatory through Wide Area WorkFlow, and acceptance occurs at destination upon government inspection. The contract includes numerous FAR clauses modified by Deviation 2026-00038, addressing equal opportunity, trafficking in persons, employment eligibility, cybersecurity, sustainable procurement, and unenforceable obligations, with accelerated payments to small business subcontractors. Offerors must represent their small business status, UEI, and CAGE code, and if providing covered telecommunications equipment, disclose associated entity information. Proposals must be submitted electronically via DIBBS by August 3, 2026, and the primary point of contact is Paula Mcclary of DLA District San Joaquin
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332912
New
DIBBS
ACTUATOR, ELECTROMEC
Solicitation # SPE7MC-26-T-165D
This contract mandates the supply of two electromechanical actuators under solicitation SPE7MC-26-T-165D, with a delivery requirement of 400 days from the contract date and an original required delivery date of September 19, 2027. The items must be delivered FOB origin under strict packaging standards aligned with MIL-STD-2073-1E and MIL-STD-129, using prescribed methods for preservation, wrapping, and cushioning, with no special marking required. The contract enforces compliance with DLA packaging requirements and prohibits the intentional use of mercury or mercury-containing compounds in any supplied hardware, except for specified functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. It also bans Class I ozone-depleting chemicals and requires approval for all substitute chemicals. The contractor must meet CMMC Level 2 cybersecurity self-assessment requirements and adhere to technical and quality standards referenced via the DLA Master List of Technical and Quality Requirements. The shipment destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with no variance allowed in quantity. The contract is tied to NSN 4810015721965 and is issued under the Department of Defense, with Paula McClary as the primary point of contact for inquiries.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-147W
The contract pertains to the procurement of 15 globe stop valves, identified by NSN 4820-01-212-2571, under solicitation number SPE7MC-26-T-147W, issued by the Defense Logistics Agency San Joaquin. Delivery is required within 168 days of order award, with responses due by August 3, 2026. The item is classified under NAICS code 332911 and is subject to strict export control regulations, as it involves technical data governed by either ITAR or EAR, making unauthorized disclosure to foreign persons—regardless of location—a violation. Access to this technical data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DLA training and questionnaire evaluations. Distribution and handling must comply with DFARS 252.225-7048, and only DLA-approved entities may handle or receive the controlled information. The contract is administered by the Department of Defense, with performance located in Tracy, California, and primary point of contact being Paula Mcclary at fmda3302@dla.mil.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LIFT-CHECK
Solicitation # SPE7MC-26-T-153B
This contract specifies the procurement of a diaphragm-type lift-check valve with a bronze body and a 3/8 inch pipe size, designed for socket weld installation and intended for use with water as the media. It is a critical application item and a restricted source procurement requiring government engineering source approval, with manufacturing requiring specialized tooling for metal casting. The item is uniquely identified by NSN 4820-01-058-9728 and manufacturer part number 73587J from Griswold Industries, and must comply with stringent technical and quality standards referenced in the DLA Master List of Requirements. Mercury and mercury-containing compounds are explicitly prohibited from intentional addition or direct contact unless exempted under specific functional uses defined by NAVSEA, with additional containment and safety requirements for any permitted exceptions. The contract mandates delivery of 22 units within 170 days under FOB origin terms with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking codes applied. The item must be palletized according to specified guidelines, and shipping instructions direct delivery to DLA District San Joaquin at Tracy, California. The solicitation, issued under SPE7MC-26-T-153B, is a total small business set-aside with a response deadline in August 2026 and a required ship date of January 21, 2027. All documentation and compliance obligations are governed by DLA procedures and DoD unit of issue standards.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details