VALVE, REGULATING, TEMPE

VALVE,REGULATING,TEMPERATURE
VALVE, TEMPERATURE REGULATING.
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains contact@example.gov. A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) contact@example.gov.
1-1/2 INCH SIZE.
EXCEPTIONS TO SPECIFICATION: END TO END DIM.
11-3/4 INCH IS MET BY PROPER SIZED SPOOLS;
SPECIAL FAIL SAFE CONSTRUCTION IS REQ'D; SOFT
SEAT RULON IS ACCEPTABLE; VALVE SHALL HAVE SIL
BRAZE UNION ENDS; BULB RATING SHALL BE 150 PSIG;
TEMPERATURE SETTING SHALL BE 140 DEG. F. WITH A
ADJUSTABLE RANGE OF 120 TO 180 DEG F; VALVE
SHALL HAVE A SAFETY SHUT-DOWN OF 5 DEG F MIN.
10 DEG F MAX. ABOVE SETTING; INLET STEAM PRESS.
40 TO 100 PSIG, INLET STEAM TEMP. RANGE 267 TO
425 DEG F; FORGED BRASS BONNET IS ACCEPTABLE;
VALVE MUST BE CERTIFIED TO OPERATE SMOOTHLY
WITHOUT HESITATION AT VARIOUS BACK PRESSURES UP
TO 10 PSIG; SHOCK AND VIBRATION TESTS ARE REQ'D;
VALVE DIMENSIONS ARE AS FOLLOWS: FACE TO FACE OF
11-3/4 IN.; DISTANCE BELOW CENTER-LINE OF INLET
AND OUTLET PORTS IS 9 INCHES MAX.; DISTANCE
ABOVE CENTER-LINE OF INLET AND OUTLET PORTS IS
15 INCHES MAX.; VALVE WIDTH IS 14 INCHES MAX.;
THE THERMAL ELEMENT DIMENSIONS ARE:
RETAINING NUT 1 1/8-12 STRAIGHT THREAD, 1 INCH
COMBINED LENGTH OF RETAINING NUT PLUS THICKNESS
OF SEAL, 15 1/2 INCH MAX LENGTH INTO THE HEATER
AND THE THERMAL BULB DIA LESS THAN 13/16 INCHES<(>,<)>
BULBS MAY BE COMPLETELY FLEXIBLE OR FLEXIBLE
WITH RIGID PORTIONS NOT TO EXCEED 7 IN. IN
LENGTH.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE7MC-27-T-1929
SECTION B
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-19772C NOT 1 REVISION NR C DTD 03/27/2024 PART PIECE NUMBER: M19772-C1F1024
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019030964 0001 EA 5.000
NSN/MATERIAL:4820011420257
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
SPE7MC-27-T-1929
SECTION B
PR: 7019030964 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E8 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/04/2027 Original Required Delivery Date:09/22/2027
SPE7MC-27-T-1929 NSN/Part Number: 4820-01-142-0257 Quantity: 5 EA Purchase Request: 7019030964QTY: 5 Delivery: 165 days ADO