Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE,REHEATER DIV,

Active
SPRPA126QWB55Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued under EAF Emergency Acquisition Flexibilities, seeks offers for a VALVE, REHEATER DIV, identified by solicitation number SPRPA126QWB55, with a response deadline of August 24, 2026. The contract is classified as a Critical Application Item (CAI), requiring that all offerors source from government-approved suppliers; distributors must submit authorized distributor letters on the source’s official letterhead at proposal submission, or their offers will be deemed technically unacceptable. The work falls under NAICS code 336310 and is managed by the Department of Defense’s Office of DLA Aviation at Philadelphia, with the primary point of contact listed as Joseph Gambino. Mandatory clauses include the requirement to use Workflow Pro’s Assist Module, adherence to Buy American provisions, compliance with security prohibitions, and certifications related to equal opportunity for veterans and workers with disabilities. Payment processing must follow Wide Area Workflow instructions, and offerors must provide invoice and receiving report information as a combined document. Additional requirements include reporting on recovered material content for EPA-designated products, compliance with royalty obligations, and acknowledgment of priority rating for national defense use. All representations and certifications must conform to the latest deviations effective February 2026, and offers must adhere to the strict conditions imposed by the emergency acquisition authority.

General Info

VALVE, REHEATER DIV solicitation under emergency acquisition; CAI, approved suppliers, Buy American, Workflow Pro, DLA Aviation, August 24, 2026 deadline.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report (combo)||TBD|SPRPA1|TBD|TBD|TBD|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| This Solicitation is being issued under EAF Emergency Acquisition Flexibilities. THIS IS A CRITICAL APPLICATION ITEM (CAI). Offerors are advised that offers received from sources which are not government-approved sources of supply will be deemed technically unacceptable, and therefore ineligible for award. Any distributors of approved source(s) MUST submit a copy of their authorized distributor letter, on the source?s letterhead, to the buyer point of contact indicated on the solicitation via email, at time of proposal submittal. \

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
ORIFICE PLATE ASSEMBLY
Solicitation # SPE7M4-26-T-328Q
The contract specifies the procurement of an orifice plate assembly with part number 5712-2PC and NSN 4820-00-911-1545, for a quantity of 157 units, under solicitation SPE7M4-26-T-328Q. Delivery is required within 164 days, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, packaging materials, and the U pack code. The item is classified as a critical application item with a non-extendable shelf life of 120 months and is subject to DLA’s packaging and quality requirements as defined in their master list of technical and quality standards. Mercury and mercury-containing compounds are strictly prohibited unless part of approved functional components like batteries or sensors, and portable devices containing mercury must have a secondary containment as per NAVSEA 5100-003D. A Certificate of Quality Compliance is mandatory, and removal of government identification from non-accepted supplies is required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is February 2, 2027, with an original delivery due date of December 17, 2026. Unit of issue is each, priced at $157.00 per unit, totaling $24,649.00.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
GENERATOR, ENGINE ACCES
Solicitation # SPE7L3-26-T-170T
The contract pertains to the procurement of one generator engine accessory with NSN 2920-01-595-9464 and part number 4982228, supplied by CUMMINS INC under solicitation SPE7L3-26-T-170T. Delivery is required within ten days of contract award, with shipment designated FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 and MIL-STD-129, prioritizing the DLA Master List of Technical and Quality Requirements. The item is to be packaged per the specified Unit of Issue and Quantity per Unit Pack, with palletization adhering to DLA packaging standards. The delivery address is located at Prince Sultan Air Base in Saudi Arabia, with the shipment identified by RDD 555 and transport governed by DLA procedural notes C19 and C20. The contract was posted on August 10, 2026, with a response deadline of August 21, 2026, under NAICS code 336310, managed by the Department of Defense’s Land Supplier Operations Vehicle Support office, with Lee Miller as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7L5-26-Q-0163
The contract is for the procurement of 788 units of a fluid filter element identified by NSN 2910-01-595-6561, classified as a commercial off-the-shelf item. It specifies firm fixed pricing with zero tolerance for quantity variance and requires delivery to the destination point under FOB origin terms, with an 81-day performance window from the award date. The item is subject to DLA packaging requirements aligned with MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking codes applied. Packaging must adhere to DLA’s standardized unit of issue and palletization protocols, and all supplies must be shipped to the designated delivery address at the DLA Distribution facility in New Cumberland, Pennsylvania, as specified in the contract documents. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers embedded in the specification, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. Inspection and acceptance occur at the destination, and transportation logistics follow DLA procedural notes C19 and C20. The contract is issued under solicitation SPE7L5-26-Q-0163 with a response deadline of August 17, 2026, and the materials are intended for use by the Department of Defense under the NAICS code 336310. The primary point of contact for inquiries is Mary Rowley, and the required delivery date is August 6, 2026. Approved suppliers include WIX Corp, Cummins Power Generation Inc., and Parker-Hannifin Corporation with their respective part numbers.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
SLED
Hybrid Electric Drive System Installation
MODOT TRANSPORTATION

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336310
New
DIBBS
Manufacture and Supply of Radiator Assembly (Military-Grade)The contract calls for the full manufacturing, testing, and delivery of a single military-spec radiator assembly identified by NSN 2930-01-566-8452 and Part Number 87719313. The product must meet all Department of Defense technical specifications and comply with DLA requirements for packaging, labeling, and environmental standards to ensure suitability for military operational environments. The radiator assembly is intended for use at Fort Bliss, Texas, with performance and delivery obligations tied to that location. This is a subcontract opportunity under NAICS code 336310, which classifies it within the automotive parts manufacturing sector, specifically for military-grade applications. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, providing a limited window for qualified vendors to submit proposals. The contracting activity is managed by the Land Supply Chain under the Department of Defense, and all work must adhere to strict military logistics and quality control protocols. The official solicitation link is available through the DIBBS system for further details and submission procedures.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
Radiator Fan Shroud Supply (NSN 2930016028008)
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
Replacement Collar for Diesel Engine Injection PumpThe contract entails the supply of 110 units of a precision control rack injection pump collar specifically designed for the Fairbanks Morse diesel engine model 38D8-1/8, which is deployed in military fluid handling systems. This component is critical to the engine’s fuel injection performance and must meet exacting military-grade specifications to ensure reliability under demanding operational conditions. The project is classified as a subcontract under NAICS code 336310, indicating it falls within the Aerospace Product and Parts Manufacturing sector, and is being procured by the Fluid Handling Division of the Department of Defense. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, allowing potential vendors a brief window to submit proposals. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, suggesting the delivered components will be integrated into or serviced at a DoD facility in that location. The contract is accessible via the DIBBS portal, and while details such as point of contact and set-aside status are not provided, the focus remains on securing a qualified supplier to deliver this specialized part to support ongoing military fluid handling operations.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
Fuel Injector Assembly SupplyA single Fuel Injector Assembly with NSN 2910017106138 is being solicited as a commercial off-the-shelf item to meet military-specification packaging, marking, and hazardous materials handling requirements. The procurement is structured as a subcontract under the NAICS code 336310, assigned to the Department of Defense through its LAND SUPPLY CHAIN organization, with performance required at the specified location in Williamsburg, Virginia, ZIP 23185-5831. The opportunity was posted on August 9, 2026, and responses must be submitted by August 20, 2026, indicating a tight turnaround window for potential suppliers to comply with all technical and regulatory standards. The contract reference is accessible via the provided DIBBS link, and while no solicitation number is listed, the procurement is part of the broader defense logistics framework governed by standardized military compliance protocols.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
Glow Plug Supply and DeliveryThe contract entails the procurement and delivery of 30 military-specification glow plugs identified by NSN 2920-12-342-2744, manufactured to meet Defense Logistics Agency technical standards for operational use by the Lithuanian Armed Forces. The items must comply with all applicable military performance and quality requirements to ensure reliability in harsh environmental conditions. This is a subcontract under the Department of Defense's Land Supply Chain, categorized under NAICS code 336310, which pertains to automotive engine parts manufacturing. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, and the place of performance and delivery location are not specified beyond the broader scope of support to the Lithuanian military. All proposals must be submitted through the official DIBBS portal linked in the documentation.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, F
Solicitation # SPE7L1-26-T-946Q
The contract is for one fuel injector assembly, part number 4928260 with NSN 2910-01-710-6138, designated as a critical application item under solicitation SPE7L1-26-T-946Q. The item must be delivered in a single unit within 20 days, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined including unit container E5 and intermediate container E5. Palletization must follow RP001 DLA packaging requirements, and no special marking is required. The delivery destination is the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, but parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The original required delivery date is August 10, 2026, and the contract includes project code ZH9 TP 2 and government-use identifiers for tracking. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 336310 for motor vehicle parts manufacturing, managed by the Department of Defense's Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-945X
The contract is for the procurement of 103 O-RINGS with NSN 5331-01-281-2339 under solicitation number SPE7L1-26-T-945X, issued by the Department of Defense through the Land Supply Chain. Delivery is required within 100 days of award, with the solicitation posted on August 9, 2026, and responses due by August 20, 2026. The item falls under NAICS code 336310 and is to be delivered to New Cumberland, Pennsylvania, 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract prohibits the use of Class I ozone-depleting chemicals and asbestos, superseding any conflicting specification requirements, and mandates approved substitutes where applicable. Access to restricted technical data is limited to U.S. persons who complete a mandatory form from the DLA Foreign Secure folder. The primary point of contact is Robert Warne, reachable at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
SHROUD, FAN, RADIATOR
Solicitation # SPE7L1-26-T-943Y
The contract pertains to the procurement of one unit of a SHROUD, FAN, RADIATOR identified by NSN 2930-01-566-8452 and part number 87719313 from CNH INDUSTRIAL AMERICA LLC, issued under solicitation SPE7L1-26-T-943Y. Delivery is required within ten days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged in compliance with ASTM D3951, with all packaging and labeling adhering strictly to MIL-STD-129, superseded where necessary by the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specification. Packaging must be palletized per RP001 requirements and marked with the designated unit of issue and quantity per unit pack. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated US Army facility at Fort Bliss, Texas, with the RDD 555 shipment code and project identifier TP 2. The freight and mark-for addresses are identical, and the contract includes a government-use-only designation with specific distribution and control codes. The original required delivery date is August 5, 2026, with a response deadline for the solicitation set for August 20, 2026. The contracting officer is Kristina Derry of the Department of Defense’s Land Supply Chain, and all technical and quality standards referenced via R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. Unit of issue is each, and the contract enforces full compliance with DoD procurement protocols, including the handling of covered defense information.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 336413
New
Federal
VAVLE,HOT SIDE TEM
Solicitation # SPRPA126QWB56
This contract solicitation, issued under EAF Emergency Acquisition Flexibilities, seeks to procure VAVLE, HOT SIDE TEM equipment with a critical application designation, meaning failure could result in mission failure or safety risks. The solicitation number is SPRPA126QWB56, posted on August 10, 2026, with a response deadline of August 24, 2026, and is governed under NAICS code 336413. Offers must originate exclusively from government-approved sources of supply; distributors must submit an authorized distributor letter on the source’s official letterhead at the time of proposal submission. Failure to comply will render offers technically unacceptable. The contract mandates adherence to multiple federal clauses including Buy American requirements, Equal Opportunity for Veterans and Workers with Disabilities, Security Prohibitions, and the mandatory use of Workflow Pro’s Assist Module. Invoices and receiving reports must follow the specified combo format, and the Navy’s use of AbilityOne contractors is referenced. The contract also includes obligations related to royalty information, priority ratings for national defense, and reporting on recovered material content per EPA guidelines. The point of contact for inquiries is Joseph Gambino, reachable via email and phone through the Department of Defense’s DLA Aviation office in Philadelphia, Pennsylvania.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # SPRPA126QXB62
This solicitation, titled CIRCUIT CARD ASSEMB and identified by SPRPA126QXB62, is issued under Emergency Acquisition Flexibilities authority by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, Pennsylvania. It seeks supplies classified as a Critical Application Item and pertains to NAICS code 334412 with a small business size standard of 750 employees. The contract mandates compliance with numerous far clauses including warranty of supplies for 365 days with a 45-day defect discovery window, mandatory use of Workflow Pro Assist Module, and adherence to Buy American provisions under the Free Trade Agreements and Balance of Payments Program with required certifications. The contract includes requirements for ISO9001 or higher quality standards, equal opportunity for veterans and workers with disabilities, royalty disclosures, and national defense priority rating notifications. Transportation must comply with sea shipment protocols and all invoices and receiving reports must be processed via Wide Area Workflow using SPRPA1 as the payment instruction code. The contract prohibits the use of drawings and enforces integrity of unit pricing. The response deadline is September 8, 2026 at 8:30 PM Eastern Time, with the solicitation posted on August 10, 2026. All offers must be submitted electronically through SAM.gov with no drawings available for reference. The primary point of contact is Mary Lindsay, reachable via telephone at 215-737-3832 or email at MARY.LINDSAY@DLA.MIL. The contract includes alternate annual representations and certifications per deviation 2026-O0043 and incorporates security prohibitions and exclusions as per class deviation 2026-O0025. No set-aside type is designated, and the procurement is being conducted under emergency authorities, emphasizing urgency and mission-critical support for national defense applications.
Bare Printed Circuit Board Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC35
The contract pertains to the acquisition of four units of NSN 6K-8145-015223940-DQ, with delivery terms set at FOB origin, meaning the buyer assumes all transportation costs and risks once the item leaves the supplier’s location. Engineering source approval is mandatory, as the part relies on proprietary design capability, specialized manufacturing or repair knowledge, and unique technical data held exclusively by approved sources, none of which are economically accessible to the Government. Any alternate supplier must undergo formal qualification through procedures established and approved by the cognizant Government engineering activity to ensure the part maintains its required quality standards. The acquisition is subject to a Total Small Business Set-Aside under FAR 19.5, restricting eligibility to small businesses, and is being managed by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia. The presolicitation was posted on July 23, 2026, with responses due by September 8, 2026, and primary point of contact is Makayla Hauser of the APAC.41 team.
Other Metal Container Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336413
New
Federal
BODY ASSY,FWD,AIRCR
Solicitation # SPRPA126QWB54
This solicitation, numbered SPRPA126QWB54, seeks proposals for a BODY ASSY,FWD,AIRCR under the EAF Emergency Acquisition Flexibilities, with a response deadline of August 24, 2026. The contract is managed by the Department of Defense through the Pa DLA Aviation office in Philadelphia, Pennsylvania, and falls under NAICS code 336413. Offerors must be government-approved sources of supply; distributors must provide an authorized distributor letter on the source’s official letterhead at the time of proposal submission, or their offers will be deemed technically unacceptable. Key mandatory requirements include adherence to the Wide Area Workflow Payment Instructions, mandatory use of Workflow Pro’s Assist Module, and compliance with Buy American provisions, including applicable certificates and recovered material content estimates. Equal opportunity obligations for veterans and workers with disabilities are enforced, alongside security prohibitions and exclusions defined by a February 2026 deviation. Additional provisions cover royalty information, national defense priority ratings, and the Alternate A annual representations and certifications. All offers must be submitted electronically via the provided SAM.gov link, and inquiries should be directed to the primary point of contact, Joseph Gambino, via email or telephone.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC38
The contract pertains to the procurement of 152 units of part NSN 6K-8145-011395620-LU with TDP version 011 and reference number SPD65E-1701-001, to be delivered FOB origin. The Government does not own the rights to the technical data required to source or repair this part from alternate suppliers, and such data cannot be acquired through purchase, development, or other means. Reverse engineering the part is deemed uneconomical, locking the procurement to the sole source. The solicitation, identified as SPRPA126RVC38, is a presolicitation under a Total Small Business Set-Aside, with a response deadline of September 8, 2026. It was posted on July 23, 2026, and is managed by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, Pennsylvania. The primary point of contact is Alana M. Berkheiser, reachable via phone or email for inquiries related to the opportunity.
Other Metal Container Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336413
New
Federal
CENTER BODY ASSEMBL
Solicitation # SPRPA126QWB53
The solicitation issued under EAF Emergency Acquisition Flexibilities seeks offerings for the CENTER BODY ASSEMBL under solicitation number SPRPA126QWB53, with a response deadline of August 24, 2026. Offers must come exclusively from government-approved sources of supply, and any distributor must provide an authorized distributor letter on the source's official letterhead at the time of submission. The contract is governed by numerous mandatory clauses including requirements for item unique identification and valuation, mandatory use of Workflow Pro’s Assist Module, and adherence to Buy American and Free Trade Agreements provisions. Compliance with equal opportunity standards for veterans and workers with disabilities, security prohibitions, and recovered material content reporting is also required. A priority rating notice is in effect for national defense and energy programs. The contracting office is the Department of Defense's DLA Aviation in Philadelphia, with Joseph Gambino as the primary point of contact. Technical noncompliance, including failure to provide authorized distributor documentation or violating sourcing restrictions, will result in disqualification.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
STEERING UNIT,AIRCR
Solicitation # SPRPA126QWB57
This contract, titled STEERING UNIT, AIRCR under solicitation number SPRPA126QWB57, is issued under EAF Emergency Acquisition Flexibilities and is designated as a Critical Safety Item. It mandates strict adherence to MIL-STD-130 for item markings and requires the contractor to implement a robust quality control system compliant with Mil-I-45208A, Mil-Q-9858, or ISO 9000/9001/9002 standards. The contractor is fully responsible for all inspection, testing, and repair activities, including the development and maintenance of detailed procedures, quality assurance documentation, and historical records for each contract line item by serial number. All purchased materials must be controlled through a validated system, receiving inspections must be documented with dimensional, material, and finish data, and nonconforming material must be segregated and dispositioned according to strict guidelines. The contractor may use an Internal Review Board only for minor non-conformances requiring rework or scrap, while formal authority for AS-IS dispositions remains with the Government through the DCMC and NAVSUP Contracting Officer. The contract enforces comprehensive recordkeeping, requiring full traceability of every component from receipt through repair and final acceptance, including test results, repair travelers, replacement parts, and QA history cards. Randomly selected repaired units may be subjected to Government-led assessment testing for performance, environmental, and quality conformance. All quality data, failure analyses, and corrective action plans must be submitted upon request. Additionally, the contract incorporates mandatory federal compliance clauses including Buy American requirements, Equal Opportunity for Veterans and Workers with Disabilities, Security Prohibitions, and mandatory use of Workflow Pro Assist Module. Offers from non-government-approved suppliers are deemed unacceptable, and distributors must provide authenticated authorization letters at proposal submission. Packaging must conform to MIL-STD-2073, and the solicitation is open for response until August 24, 2026, with performance and contract management centered at the Department of Defense’s office in Philadelphia, Pennsylvania.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126RYC79
The contract pertains to the procurement of 841 units of a turbine rotor blade designated NSN 0R-2840-017139884-B8 with reference number 5145T41P02, delivered FOB origin. This item is classified as a Critical Safety Item, indicating that its failure could result in severe consequences, including loss of life or mission-critical system failure. The Government lacks sufficient, accurate, or legible data to source this component from any alternative supplier, mandating exclusive procurement from the current source. The solicitation number is SPRPA126RYC79, issued as a presolicitation with a response deadline of August 17, 2026, and was posted on July 23, 2026. The contracting office is the Department of Defense’s Defense Logistics Agency Aviation, located in Philadelphia, Pennsylvania, with Kenneth Lauber as the primary point of contact for inquiries. No set-aside type or NAICS code is specified, and the place of performance is not defined, though delivery terms are based on origin shipment.
Aircraft Engine and Engine Parts Manufacturing

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 332919
New
Federal
47--FAIRING NOZZLE
Solicitation # SPRPA126RYC78
The contract pertains to the procurement of 31 units of a fairing nozzle designated by NSN 0R-4730-017091524-B8 and reference number 5142T40G01, with delivery terms set at FOB origin. This item is classified as a Critical Application Item, indicating its essential role in mission-critical systems where failure could lead to severe operational consequences. The government lacks sufficient, accurate, or legible data to source this part from any source other than the current contractor, necessitating sole-source procurement. The solicitation, issued under SPRPA126RYC78, was posted on July 23, 2026, with responses due by August 17, 2026, and is classified as a presolicitation. The contracting activity is managed by the Department of Defense through the Defense Logistics Agency Aviation office in Philadelphia, Pennsylvania. Primary point of contact for inquiries is Kenneth Lauber, with contact information provided including email, phone, and fax. No set-aside type or NAICS code is specified, and performance location data remains incomplete.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
STRUCTURAL COMPONEN
Solicitation # SPRPA125RLR36
This contract is a Department of Defense solicitation issued by DLA Aviation Philadelphia for the procurement of structural components classified as critical application items for Aircraft Launch and Recovery Equipment (ALRE), specifically intended for Foreign Military Sales (FMS). Only new, not refurbished or remanufactured, spare parts from government-approved sources are eligible, with distributors required to provide authorization letters from the original source. Due to the critical flight safety nature of these components and their direct application in vital shipboard systems, rigorous quality assurance, source approval, and inspection requirements are enforced. Prospective manufacturers must submit extensive documentation demonstrating their technical capability and recent relevant experience for source approval or first article waiver consideration. The contract specifies that items must be produced, inspected, and tested as per detailed Navy drawings, specifications, and related standards, including MIL-STD-130 for marking and relevant tests such as heat treatment, welding, chrome plating, and non-destructive testing by accredited laboratories. It enforces quality conformance through 100% inspection of critical features and stringent acceptance criteria. First Article Testing is mandatory unless a waiver is formally granted, and detailed inspection, certification, and traceability records must accompany each delivery and be maintained for seven years. The solicitation is issued under emergency acquisition authorities to expedite delivery, waiving public synopsis, and includes precise requirements for packaging, notification of testing, final inspections, and the handling and approval process for first article samples. All awardees must ensure full compliance with technical, quality, and data reporting clauses, making the contract highly prescriptive to maintain reliability and safety standards for critical defense systems in allied nations.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
Federal
STRUCTURAL COMPONEN
Solicitation # SPRPA125RLR37
The contract titled "STRUCTURAL COMPONENT" is issued by the Defense Logistics Agency's Philadelphia office, specifically under the Pa DLA Aviation at Philadelphia. It is a solicitation with the solicitation number SPRPA125RLR37, posted on October 16, 2025, with a response deadline of November 3, 2025, at 7:00 PM. The primary NAICS code associated with this contract is 336413, which pertains to aircraft structural components manufacturing. The contract's scope involves providing structural components, likely related to aviation or defense equipment, although specific performance locations are not detailed. The primary point of contact for inquiries is Brett Duffey, reachable via email at BRETT.DUFFEY@DLA.MIL or by phone at 215-737-8600. Interested parties can view further details and the full solicitation through the provided link on the SAM.gov platform.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
Federal
POWER SUPPLY ANTI-
Solicitation # SPRPA126QWB46
This contract, titled POWER SUPPLY ANTI-, is issued under the Defense Logistics Agency Aviation at Philadelphia with solicitation number SPRPA126QWB46, posted on August 7, 2026, and with a response deadline of August 24, 2026. It is solicited under EAF Emergency Acquisition Flexibilities and is classified under NAICS code 335931. The item requires procurement exclusively from suppliers providing FAA-Certified parts accompanied by an FAA Authorized Release Certificate, specifically FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the original supplier’s letterhead to the designated point of contact at the time of proposal submission; offers from non-approved sources will be deemed technically unacceptable and ineligible for award. The contract requires adherence to multiple mandatory clauses including mandatory use of Workflow Pro’s Assist Module, compliance with Buy American and Free Trade Agreements, equal opportunity protections for veterans and workers with disabilities, security prohibitions, and representation of recovered material content in accordance with EPA guidelines. Additionally, a priority rating notice for national defense and emergency preparedness applies, and annual representations and certifications must be submitted as per deviation requirements. The point of contact for inquiries and documentation submission is Joseph Gambino, reachable via email at JOSEPH.GAMBINO@DLA.MIL or by telephone at 215-737-4239.
Current-Carrying Wiring Device Manufacturing

POSTED

3 days ago

DEADLINE

in 14 days
View Details