Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

VALVE, SAFETY RELIEF

Active
SPE7MC-26-T-243ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one safety relief valve, size 1/2 inch, with a preset setting of 60 PSI. The item is identified by NSN 4820-00-933-5988 and part number 0020-C01-MG-0060, and is designated as a critical application item used on Army Type M532 laundry units. The order is issued by the Defense Logistics Agency with a required delivery date of August 27, 2026, and a delivery timeframe of 20 days. The shipment is destined for the USS Dwight D Eisenhower CVN 69 and must be delivered FOB Origin. Compliance with DLA packaging requirements, MIL-STD-2073-1E, and MIL-STD-129 marking standards is mandatory. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.

General Info

DLA procurement of one 60 PSI safety relief valve for USS Dwight D Eisenhower.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

UNIT 100236 BOX 1, FPO, AE, 09532, USA

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-243Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUSA
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,SAFETY RELIEF
VALVE,RELIEF...1/2 IN.VALVE SIZE,PRE SET SETTING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
60 PSI KNOWN SOURCE HLT INC.7Y737 614-860-0161
USED ON LAUNDRY UNIT, ARMY TYPE M532.
THE CORRECTED P/N 0020-C01-MG-0060
P. MCCORMICK MEBA, X3037
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
ANDERSON GREENWOOD LP DBA ANDERSON 01343 P/N 0020-C01-MG-0060
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018097309 0001 EA 1.000
NSN/MATERIAL:4820009335988
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
SPE7MC-26-T-243Z
SECTION B
PR: 7018097309 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:AE CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:016
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V03369
USS DWIGHT D EISENHOWER CVN 69
UNIT 100236 BOX 1
FPO AE 09532
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V03369
USS DWIGHT D EISENHOWER CVN 69
DLA VENDORS: USE VSM FOR
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V033696215YM36
RDD:
PROJ: EK5 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 9B ADV: FC: DR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/27/2026
SPE7MC-26-T-243Z NSN/Part Number: 4820-00-933-5988 Quantity: 1 EA Purchase Request: 7018097309QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
VALVE, REGULATING, FLUID
Solicitation # SPE7MC-26-T-244D
This contract, identified as SPE7MC-26-T-244D, is for the procurement of 11 fluid pressure regulating valves with NSN 4820-01-734-3486 and part number JE10641-001 from Juniper Elbow Co. Inc. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a required delivery date of April 17, 2027. The delivery terms are FOB Origin, and the inspection and acceptance points are both set at the destination. The agreement incorporates specific technical and quality requirements, including DLA packaging standards and the prohibition of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. This is designated as a critical application item, and the contractor must adhere to the specified quantity variance of plus or minus 0 percent.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
DIAPHRAGM, VALVE, FLAT
Solicitation # SPE7MC-26-T-244R
This solicitation, issued by the DLA Dist San Joaquin under solicitation number SPE7MC-26-T-244R, is for the procurement of 32 flat valve diaphragms, identified by NSN 4820-01-431-9091. The contract requires delivery within 129 days after receipt of order and is categorized under NAICS code 332911. Performance is centered in Tracy, California, with a response deadline of September 11, 2026. Compliance requirements are stringent, necessitating adherence to DLA packaging standards and CMMC Level 2 certification. Because the item involves covered defense information and technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and have completed mandatory DLA export-control training and questionnaires to access the necessary technical data.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
TAILPIECE, VALVE
Solicitation # SPE7M0-26-T-066P
This contract solicitation, numbered SPE7M0-26-T-066P, is issued by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one valve tailpiece, identified by NSN 4820-01-719-0055. The requirement is subject to full and open competition with a delivery timeline of five days after order. The procurement allows for the use of additive manufacturing components or sub-processes in accordance with the design activity reference number or technical data package. The contract mandates strict adherence to DLA technical and quality requirements, including specific standards for packaging, quality conformance inspection, and the use of measuring and test equipment. It explicitly prohibits the use of Class I ozone depleting chemicals and requires the submission of metal certifications and certificates of quality compliance. Additionally, the technical data is subject to ITAR or EAR export controls, restricting access to approved contractors with valid US/Canada Joint Certification Program certification and completed export-control training.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
PLATE, ORIFICE, FLUID
Solicitation # SPE7M3-26-T-8751
This solicitation from the Department of Defense Fluid Handling Division is for the procurement of one fluid orifice plate, identified by NSN 4730-01-738-1964. The contract requires delivery within 20 days after receipt of order and specifies that inspection and acceptance will occur at the origin. Compliance with DLA packaging requirements and technical standards listed in the DLA Master List is mandatory. The item is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. The solicitation is listed under number SPE7M3-26-T-8751 with a response deadline of September 11, 2026.
FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-244P
This contract is for the procurement of 25 ball valves, identified by NSN 4820014699990 and associated with Parker Hannifin Corporation part numbers 10500 PC 12B and 10578B. The order is designated as a critical application item and must adhere to strict quality and technical requirements, including the prohibition of intentionally added mercury or mercury-containing compounds in accordance with NAVSEA standards. The delivery is set for FOB Origin with a required delivery date of April 21, 2027, and a need ship date of February 16, 2027. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with the final destination for shipment being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will take place at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7MC-26-T-244A
This contract is for the procurement of one solenoid valve, identified by NSN 4810015331831 and part number 900-023-208/215 from The Raymond Corp. The item is to be delivered to the USS George H W Bush CVN 77 with a required delivery date of August 27, 2026, and a delivery window of 20 days after order. The shipment is FOB Origin with inspection and acceptance occurring at the destination. The agreement mandates strict compliance with mercury-free requirements, prohibiting the intentional addition of mercury except for specific functional exceptions such as batteries or sensors. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The contract is issued by the Defense Logistics Agency under solicitation number SPE7MC-26-T-244A.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, LINEAR, DIRECTION
Solicitation # SPE7M1-26-T-320S
This contract is for the procurement of linear directional control valves, specifically part number PC50430-500 under NSN 4810014554998. The requirement consists of multiple line items totaling seven units, with delivery specified as FOB Destination to the USS Makin Island (LHD 8). The delivery timeline is set for five days after the order, with required delivery dates ranging from August 28, 2026, to September 2, 2026. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Shipments must be made via the fastest traceable means, and the use of parcel post is prohibited for these vessel shipments.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7M1-26-T-320Q
This contract is for the procurement of one butterfly valve, identified by NSN 4810014403873 and associated with Morpac Industries part numbers 10014 and 10014-5. The delivery is required within five days after the order, with FOB, inspection, and acceptance all set at the destination. The order is managed by the Maritime Supply Chain under the Department of Defense, specifically through solicitation SPE7M1-26-T-320Q. The supplier must adhere to strict technical and quality standards, including Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Additionally, the contract prohibits the use of class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except where specifically authorized for functional components.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-244G
This contract is for the procurement of nine safety relief valves under solicitation SPE7MC-26-T-244G for the Department of Defense. The items are identified by NSN 4820017338593 and are designated as critical application items, with approved part numbers from Allied Systems Company and Parker-Hannifin Corporation. Delivery is required within 217 days, with a need ship date of April 17, 2027, and shipping is set as FOB Origin. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. All shipments must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Additionally, the contract prohibits the use of Class I ozone depleting chemicals in the manufacturing or delivery of the valves, requiring any substitute chemicals to be submitted for official approval.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-244N
This contract is for the procurement of two check valves, identified by NSN 4820-01-435-8698, for the Department of Defense via DLA Dist San Joaquin. The items are designated as critical application and restricted source items, requiring engineering source approval by the government design control activity. The procurement specifies parts from Danfoss Power Solutions II, LLC, adhering to specific technical drawings and TDP Rev A Gen 1. The agreement mandates strict compliance with DLA technical and quality requirements, including the prohibition of Class I ozone-depleting chemicals and the restriction of intentionally added mercury. Delivery is set for 143 days after order, with a required delivery date of August 13, 2027, and a need ship date of February 2, 2027. Packaging must follow ASTM D3951 and MIL-STD-129 standards, with inspection and acceptance occurring at the point of origin.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
CAP, VALVE
Solicitation # SPE7MC-26-T-244C
This solicitation, identified as SPE7MC-26-T-244C, is issued by the Defense Logistics Agency for the procurement of two valve caps under NSN 4820-01-347-1517. The contract requires delivery within 222 days after the order is placed and is subject to full and open competition. Performance is centered in Tracy, California, with the procurement falling under NAICS code 332911. The agreement mandates strict adherence to DLA packaging and quality requirements, including CMMC Level 2 cybersecurity standards and the protection of covered defense information. Environmental restrictions prohibit the intentional use of mercury or Class I ozone-depleting chemicals, except where specifically authorized. Additionally, the contract is subject to stringent export controls under ITAR and EAR regulations, requiring contractors to have approved certifications and training to handle technical data.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MX-26-R-0077
The Defense Logistics Agency (DLA) Land and Maritime is conducting market research to establish an Indefinite Delivery Contract (IDC) for the procurement of nonpowered check valves, identified by NSN 4820-012984475. This requirement is intended to support recurring demands for the item, which is a critical application component with part number 9534011-1, specifically associated with Meggitt Aircraft Braking Systems. The anticipated contract structure involves a three-year base period with the possibility of adding one to four option years. While this current phase is a market survey and not a formal solicitation, the agency is gathering data regarding commercial item status, pricing, and delivery capabilities to develop a realistic future solicitation. The acquisition is subject to several stringent regulatory and technical requirements. It is governed by the Trade Agreement Act, and potential offerors must be mindful of the Berry Amendment and domestic material restrictions. Technical data associated with this procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved Joint Certification Program (JCP) certification and DLA authorization to access controlled information. Furthermore, the contract mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 and includes specific quality assurance provisions, such as tailored higher-level contract quality requirements, inspection and acceptance at origin, and adherence to specific sampling methods like MIL-STD-1916. Deliveries are expected within 360 days of an order, and no deliveries may occur prior to the issuance of a DD Form 1155.
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 3 hours ago

DEADLINE

in 30 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 332919
New
DIBBS
ACTUATOR, ELECTRO-ME
Solicitation # SPE7MC-26-T-244B
This contract is for the procurement of one electro-mechanical linear actuator, identified by NSN 4810-01-614-2510 and part number AG13B020 from Schneider Electric Buildings Americas. The item is to be delivered to the USS Cooperstown LCS 23 within 20 days of order. The agreement specifies that the delivery is FOB Destination, with both inspection and acceptance occurring at the destination point. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Shipping must be conducted via the fastest traceable means, and the use of parcel post is explicitly prohibited.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
FILLER CAP, BATTERY
Solicitation # SPE7L7-26-T-5041
This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of five battery filler caps, identified by NSN 6160-01-548-8529. The contract requires delivery within 20 days after receipt of order and is associated with solicitation number SPE7L7-26-T-5041. Performance is designated for Fort Hood, Texas, under NAICS code 335910. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific DLA training and questionnaires, and receive approval from the DLA controlling authority.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
NON-NSN ITEM
Solicitation # SPE3SE-26-Q-0453
The Defense Logistics Agency under the Department of Defense has issued solicitation SPE3SE-26-Q-0453 for the procurement of two units of non-NSN item part number 7310GM5022323. This federal requirement is associated with purchase request 7017931188. The solicitation was posted on August 31, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332410
New
DIBBS
CORE ASSEMBLY, FLUID
Solicitation # SPE8E8-26-T-5377
This contract is for the procurement of one core assembly fluid cooler, identified by NSN 4420013899046 and Cummins Inc. part number 4933306. The agreement is managed by the Defense Logistics Agency and requires delivery to Coastal Riverine Squadron One in San Diego, California, within 20 days. The shipment must be sent via the fastest traceable means, excluding parcel post, with FOB origin and inspection and acceptance occurring at the destination. The supplier must adhere to strict technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. A critical restriction is placed on the use of mercury, which shall not be intentionally added to the hardware except in specific functional cases approved by NAVSEA. Additionally, the contract incorporates guidelines for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Power Boiler and Heat Exchanger Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-Q-2340
This contract is a firm fixed price solicitation from the Defense Logistics Agency for the procurement of lead acid battery power supplies, specifically part number FA00006 from Intellipower, Inc. The requirement consists of two separate line items, each for one unit, with a delivery timeframe of 60 days after order. The items are designated as critical application items with a non-extendable shelf life of 12 months. The agreement mandates strict adherence to DLA packaging, marking, and shipping requirements, including hazardous materials standards and MIL-STD-129 for marking. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-nonconformance requirement for acceptance. Shipments are destined for the USS Mitscher DDG 57 and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
New
DIBBS
POWER SUPPLY, UNINTERRU
Solicitation # SPE7L7-26-Q-2342
This contract, solicitation number SPE7L7-26-Q-2342, is issued by the Defense Logistics Agency for the procurement of three uninterruptible power supplies, part number DSGXT4-1000RT120 from Motorola Solutions, Inc. The agreement is a firm fixed price contract with a delivery requirement of 60 days after the order is placed. The items are designated as critical application items and are destined for the USS Marinette (LCS 25) and the USS Carl M. Levin (DDG 120). The contract mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment and specific DLA packaging and marking requirements. Because the items contain sealed lead acid batteries, they are subject to hazardous materials communication standards, specific shelf life requirements of 12 months, and strict mercury-free mandates. Inspection and acceptance will occur at the point of origin, and shipping must be handled via the fastest traceable means to the specified vessel locations.

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 325510
New
DIBBS
POLYURETHANE COATING
Solicitation # SPE8ES-26-T-2677
This contract is for the procurement of one kit of gray polyurethane coating, specifically Type 4 Class H for aircraft applications with extended weatherability, conforming to MIL-PRF-85285 and FED-STD-595 color 36622. The manufacturer must be QPL approved at the time of award. The item has a 12-month extendable shelf life and must be delivered FOB destination to Davis Monthan AFB within 20 days. The supplier is required to adhere to strict packaging and safety standards, including MIL-STD-129 for marking and RP001 for DLA packaging. Because the material is hazardous, the supplier must provide Safety Data Sheets and HCS labels in accordance with 29 C.F.R. 1910.1200 and FED-STD-313-E. The kit, consisting of parts A and B to produce 1.89 liters, must be securely packaged in approved containers with an itemized list of contents to prevent damage and leakage during shipment.
Paint and Coating Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335910
New
DIBBS
BATTERY ASSEMBLY
Solicitation # SPE7L7-26-Q-2347
This contract is a firm fixed price solicitation for the procurement of two non-spillable lead acid battery assemblies, identified as commercial off the shelf items with part number M350380. The items are designated as critical application components and are subject to a non-extendable six month shelf life. Delivery is required within 60 days after receipt of the order, with inspection and acceptance occurring at the point of origin. The batteries are destined for the USS Michael Murphy and the USS William P Lawrence. The supplier must adhere to strict hazardous material guidelines, including the submission of Safety Data Sheets and Hazard Communication Standard labels in accordance with OSHA and federal regulations. Specific restrictions are placed on the use of mercury, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including the use of domestic fiberboard pads. All shipments must follow DLA packaging requirements for procurement and specific hazardous material shipping protocols.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335910
New
DIBBS
BATTERY POWER SUPPLY
Solicitation # SPE7L7-26-Q-2341
This contract is a solicitation from the Defense Logistics Agency for the procurement of four battery power supplies, identified by NSN 6130-01-647-5605. The agreement is structured as a firm fixed price contract with a delivery requirement of 60 days after order. The items are destined for the USS George H W Bush CVN 77 and the USS Kidd DDG 100, with specific shipping and handling instructions for vessel delivery. Key technical requirements include a non-extendable 12-month shelf life and strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. The contract prohibits the intentional addition of mercury, except where functionally required for batteries. This is a total small business set-aside procurement with inspection and acceptance occurring at the point of origin.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-Q-0481
This contract is a firm fixed price solicitation issued by the Defense Logistics Agency for the procurement of one refrigeration compressor, identified by NSN 4130-01-622-3092. The item is associated with part number 4721999 from John Deere Shared Services and West Side Tractor Sales Co. Delivery is required within 30 days after the order is placed, with the shipment destined for the MA ARNG UTES 1 facility in Buzzards Bay, Massachusetts. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with packaging following ASTM D3951 standards. Inspection and acceptance will occur at the destination, and the shipment must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. The contract also incorporates specific technical and quality requirements from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 4 days
View Details
New
DIBBS
NON-NSN ITEM
Solicitation # SPE3SE-26-Q-0452
The Defense Logistics Agency within the Department of Defense has issued solicitation SPE3SE-26-Q-0452 for the procurement of two units of non-NSN item part number 7310GM5022323. This federal requirement is tracked under purchase request 7017931693. The solicitation was posted on August 31, 2026, with a response deadline set for September 8, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY, UNINTERRU
Solicitation # SPE7L7-26-Q-2343
This contract is a firm fixed price solicitation issued by the Defense Logistics Agency for the procurement of one uninterruptible power supply, specifically Motorola Solutions part number DSGXT4-1000RT120. The item is designated as a critical application item with a twelve month extendable shelf life. Delivery is required within 60 days after order, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, covered defense information requirements, and specific DLA packaging and marking standards. Because the item involves sealed lead acid batteries, the contractor must provide MSDS/PSDS documentation and comply with hazardous material packaging and communication standards. Additionally, the contract prohibits the intentional addition of mercury except where functionally required for batteries or sensors.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 10 days
View Details