Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on September 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

VALVE, SOLENOID

Closed
SPE7MC-26-T-279VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7M1-27-T-2705
This procurement is for one safety relief valve, designated as a critical application item under NSN 4820012648385. The hardware consists of a steel body with stainless steel components, featuring a 3/4 inch flanged inlet and a 1 inch flanged outlet per ANSI B16.5. Technical specifications require a pressure rating of 200 PSI at 400 degrees Fahrenheit, with an adjustable pressure range between 156 and 186 PSI. The required parts are Emerson Automation Solutions part numbers DX10C/NMP1544-15 and NMP1544-OPT.1. Due to the nature of the item, casting or forging may be required for manufacture. The contract is a small business set-aside under NAICS 332911, with delivery required within five days after order. The shipment is destined for the USS BATAAN LHD 5 at FPO AE 09554. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking compliant with MIL-STD-129. Strict prohibitions are in place regarding the intentional addition of mercury or mercury-containing compounds, except for specific functional uses approved by NAVSEA. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days

AI Contract Overview

Show more

Solicitation SPE7MC-26-T-279V is a request for quotations issued by DLA Land and Maritime for the procurement of 19 solenoid valves, specifically Woodward Inc. part number 1311-902 (NSN 4810-01-526-4291). The items are designated as critical application items and are to be delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB by November 8, 2027. The procurement is categorized under NAICS code 332911 and requires compliance with the First Destination Transportation program. The contract mandates strict quality and technical standards, including CMMC Level 2 self-assessment, adherence to the DLA Master List of Technical and Quality Requirements, and compliance with NAVSEA 5100-003D regarding mercury containment. Sampling must follow MIL-STD-1916 or ASQ H1331, with acceptance requiring zero non-conformances. Packaging and marking must align with MIL-STD-129 and RP001, ensuring each unit package is marked with the NSN, contract number, lot number, and relevant CAGE codes. Inspection and acceptance will occur at the destination. Payment processing is required through the Wide Area WorkFlow system.

General Info

DLA seeks 19 Woodward solenoid valves for delivery to Tinker AFB by November 2027.

NAICS

332911 - Industrial Valve Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first18 pages · rfq
High

Read the document

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • Supply of Safety Relief Valve (Critical Application)Open now, due in 11 days
  • Ball Valve Supply (NSN 4820-01-508-4347)Open now, due in 4 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPOT OKLAHOMA
Contacts1 person available
OfficeUSA

Full Description

Show more
VALVE,SOLENOID
VALVE SOLENOID
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
This NIIN has been identified as a GE PBL item. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
SPE7MC-26-T-279V
SECTION B
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
WOODWARD, INC. 66503 P/N 1311-902
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018378756 0001 EA 19.000
NSN/MATERIAL:4810015264291
DELIVERY (IN DAYS):0405
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
ZZ = SPECIAL MARKING REQUIREMENTS: 24 OPEN FOR INSPECTION OR USE ONLY.
EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
SPE7MC-26-T-279V
SECTION B
PR: 7018378756 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:11/08/2027 Original Required Delivery Date:11/08/2027
SPE7MC-26-T-279V NSN/Part Number: 4810-01-526-4291 Quantity: 19 EA Purchase Request: 7018378756QTY: 19 Delivery: 405 days ADO

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-27-T-0382
Solicitation SPE8E4-27-T-0382 is a small business set-aside request for 13 sheets of aluminum alloy Alclad metal sheet, specifically Alloy 2024 Temper T3. The material must feature 0.0025 inch thick cladding on both sides with overall dimensions of 0.050 inches thick, 48 inches wide, and 288 inches long. The procurement is governed by several technical standards, including SAE AMS-QQ-A-250/5C and AMS-QQ-A-250/24C, as well as ASTM B660 and B666. Delivery is required within 162 days after order, with an original required delivery date of February 1, 2027, shipping FOB destination to the DLA Distribution Depot Oklahoma at Tinker AFB. Strict quality and compliance measures are in place, requiring a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award. The contract mandates precise dimensional conformity, prohibiting the use of test coupons. Packaging must adhere to MIL-STD-2073-1E and ASTM B660 Level A requirements, while marking must follow MIL-STD-129 and include specific continuous identification such as the contract delivery order number, NSN, and manufacturer's heat and lot number. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SHUTTLE
Solicitation # SPE7MC-27-T-1374
Solicitation SPE7MC-27-T-1374 is a small business set-aside issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of 76 shuttle valves, identified by NSN 4820017137337 and part number MS28767AL-4. This is designated as a critical application item that may require specialized casting, forging, and tooling, which the government may not provide. Manufacturing must adhere to TDP Rev C Gen 4, basic specification MIL-DTL-19068B NOT 1, reference specification MS28767B NOT 2, and reference drawing 16236 EI-017137337 Revision A. The contract strictly prohibits the use of Class I ozone depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Delivery is required within 99 days after receipt of order, with a need ship date of March 1, 2024, and a final required delivery date of June 7, 2027. Shipping is FOB Origin, with inspection and acceptance also occurring at the origin. Items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, and delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information.
Industrial Valve Manufacturing

POSTED

4 days ago

DEADLINE

in 1 day
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS