Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE, STOP-CHECK

Active
SPE7MC-26-T-136PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a STOP-CHECK VALVE with NSN 4820-01-514-8060 and part number 1044-001J, sourced from MILWAUKEE VALVE CO, INC, under solicitation SPE7MC-26-T-136P. Eight units are required to be delivered within seven days of the order, with delivery terms FOB origin, and the shipment must comply with DLA packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, while prioritizing all DLA Master List of Technical and Quality Requirements. The valve must be free of intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, instrumentation, weapon systems, or reagents approved by NAVSEA, and any portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. Tooling may be required for casting or forging processes, and the contractor is directed to seek assistance via DLA’s Casting and Forging portal if needed. The inspection and acceptance points are at the destination, with zero tolerance for quantity variance, and the item must be shipped to the DLA Distribution Center in Tracy, California. The original required delivery date is January 4, 2027, with an updated need-by date of August 4, 2026, and all packaging must be palletized per RP001. The contract is governed by the DLA Master List revisions in effect at the solicitation issue date, and the unit of issue is each (EA), priced at $8.00 per unit for a total of $64.00.

General Info

Eight STOP-CHECK VALVES, NSN 4820-01-514-8060, $8 each, FOB origin, deliver to Tracy CA by August 4, 2026, DLA packaging standards.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-136P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
JANELLE HANLEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE,STOP-CHECK
VALVE,STOP-CHECK.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
MILWAUKEE VALVE CO, INC 76364 P/N 1044-001J 600
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015416118 0001 EA 8.000
NSN/MATERIAL:4820015148060
DELIVERY (IN DAYS):0007
DELIVER FOB: ORIGIN
SPE7MC-26-T-136P
SECTION B
PR: 7015416118 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:08/04/2026 Original Required Delivery Date:01/04/2027
SPE7MC-26-T-136P NSN/Part Number: 4820-01-514-8060 Quantity: 8 EA Purchase Request: 7015416118QTY: 8 Delivery: 7 days ADO

Similar Contracts

NAICS: 332911
New
DIBBS
DECK BOX OPERATOR, VThe contract is for the procurement of eight Deck Box Operators, Valve, including turn, identified by NSN 4820-01-270-6463 and part number S14752-604, manufactured by B.W. Elliott Manufacturing Co., LLC. Delivery is required FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination. The item is classified as a critical application item with strict compliance requirements, including adherence to DLA packaging standards as outlined in RP001 and MIL-STD-2073-1E, with specific packaging methods such as preservative type 32, dry storage, and D3 unit containers marked per MIL-STD-129 with no special marking. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery deadline is 137 calendar days from the contract award, with an original required delivery date of June 23, 2026, and the ship date must be no later than January 13, 2026. Shipping instructions direct all deliveries to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The contract incorporates technical and quality requirements referenced by R and I numbers from the DLA Master List, with the applicable revision determined by acquisition size and amendment timing, and transportation is governed by DLAD procedural notes C19 and C20. The solicitation number is SPE7MC-26-T-136T, with a response deadline of July 27, 2026, and the contracting office is the DLA Distribution New Cumberland Facility under the Department of Defense, with Janelle Hanley listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATEThe contract specifies the procurement of one gate valve, part number 1146-A20U, manufactured by Milwaukee Valve Co., Inc., with NSN 4820-01-577-0375, under solicitation SPE7MC-26-T-136K. Delivery is required within 20 days to the destination address associated with USS MICHAEL MONSOOR DDG 1001 at APO AP 96694, with FOB destination terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the delivery point. The valve must comply with all DLA Master List of Technical and Quality Requirements, which supersede any other standards, including ASTM D3951. Mercury or mercury-containing compounds are strictly prohibited in or on the hardware unless explicitly exempted for specific functional uses such as batteries, fluorescent lights, sensors, weapon systems, or approved chemical reagents; portable devices containing mercury must have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-129 labeling, be palletized according to DLA packaging requirements, and avoid parcel post shipping; vendors must use traceable transportation methods, and shipment details must reference RDD 777 and the provided TCN. The valve is intended for U.S. Navy use, and all documentation must reflect the official government procurement codes and identifiers as specified.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECKThe contract is for one unit of a stop-check valve identified by NSN 4820-01-301-7291 and part number 7830 from Henry Technologies Inc., with a total price of $1.00. Delivery is required within 20 days FOB destination, with no variance allowed in quantity. The valve must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for labeling and marking, and palletization must follow DLA Packaging Requirements for Procurement. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or specific chemical reagents, with portable mercury-containing devices required to have shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Shipment must be made using traceable transportation methods, not parcel post, and delivered to the specified FPO address for USS ANCHORAGE LPD 23 via vessel shipment under DLAD PROC NOTE C19 and C20. The required delivery date is July 13, 2026, with a contract solicitation number SPE7MC-26-T-136H, issued by the Defense Logistics Agency under NAICS code 332911, and point of contact for inquiries is Paula McClary.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEFThe contract is for one safety relief valve with NSN 4820-01-699-1791, issued under solicitation SPE7MC-26-T-136L by the Defense Logistics Agency. Delivery is required within 20 days to FPO AA 34085, destination FOB, with no tolerance for quantity variance. The item is designated as a critical application item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. Ozone-depleting chemicals are strictly prohibited, and any substitute materials must be pre-approved unless explicitly authorized by the specification. Packaging must conform to ASTM D3951 but is subject to higher precedence from DLA requirements, and labeling must follow MIL-STD-129. Palletization shall adhere to DLA packaging guidelines, and shipment must use the fastest traceable method—parcel post is prohibited. The delivery is to be made via vessel shipment with transportation governed by DLAD procedure notes C19 and C20. The required delivery date is July 13, 2026, and the item is to be shipped under RDD 777 with the tracking number V201736188EA29. The contract is classified under NAICS code 332911, and the point of contact is Paula McClary of the DLA, reachable via email and phone provided.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECKThe contract is for the procurement of three check valves identified by NSN 4820005856697 and part numbers 10-796-501 from The Boeing Company and 1112-578309 from Parker Hannifin Corporation, classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951; packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with unit of issue as one each and no tolerance for variance in quantity. The valves must be delivered FOB origin within 161 days of contract award, with inspection and acceptance occurring at the destination, and the designated delivery point is the DLA Distribution Depot in Tinker AFB, Oklahoma. Packaging and palletization must strictly adhere to RP001 guidelines, and all items must be marked and labeled accordingly. The solicitation number is SPE7M4-26-T-262Z, issued under NAICS code 332911 by the Department of Defense’s Fluid Handling Division, with a response deadline of July 27, 2026, and the original required delivery date set for April 5, 2027. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20, and correspondence must be directed to the primary point of contact, Blake Tushar, at DLA.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details