This Solicitation opportunity from Department Of Defense was posted on May 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
VALVE, SURGICAL DRAI
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of 10 latex-free surgical drain valves with an overall outside diameter of 0.75 inches nominal and a body overall length of 6.5 inches nominal. The device is designed for gravity drainage of the chest cavity, allowing the evacuation of air and/or liquids while preventing backflow toward the patient and facilitating the normalization of intrathoracic pressure. It features a one-way pneumothorax aspiration system with a sterile, disposable, universal barbed tube fitting. The unit of issue is each, and the product must have a shelf life of 36 months, with no more than seven months having elapsed from the date of manufacture to the date of delivery to the government. All packaging must comply with commercial standards specified in the procurement document, with each unit sealed in a protective container to prevent damage or breakage, and shipped in suitable commercial exterior containers ensuring safe delivery at the lowest possible rate to the designated point of delivery in North Little Rock, Arkansas. Marking must adhere strictly to Medical Marking Standard No. 1 (MMS No. 1), superseding MIL-STD-129, with shelf-life labels including the manufacturer date, expiration or retest date, and contract or lot number as per the latest revision of MMS1A. The procurement falls under NAICS code 339113 and incorporates the DLA Master List of Technical and Quality Requirements, with requirements identified by R or I numbers applicable. Delivery is required within five days of award, with FOB Destination terms, and inspections are to be conducted at the destination per FAR 52.246-2. All offers must be submitted through DIBBS prior to the deadline of June 8, 2026, and offerors must be registered in the System for Award Management (SAM). Additive manufacturing is prohibited unless prior approval is granted by the contracting officer and Engineering Support Activity. The contract applies to the Buy American Act and DFARS 252.225-7001, and requires compliance with safety data sheet standards under 29 CFR 1910.1200(g). Payment processing must occur via Wide Area WorkFlow, and contractors must ensure compliance with all applicable FAR and DFARS clauses including those governing whistleblower rights, disclosure of information, cybersecurity, and trafficking in persons. Special requirements also mandate adherence to Defense Priorities and Allocations System guidelines and submission of certified cost or pricing data as permitted by deviation
General Info
Agency
NAICS
Place of Performance
CAMP ROBINSON, NORTH LITTLE ROCK, AR, 72199-9769, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
VALVE, SURGICAL DRAIN
OVERALL OUTSIDE DIAMETER 0.75 INCHES NOMINAL. BODY OVERALL LENGTH 6.5
INCHES NOMINAL.
THE LATEX FREE CHEST TUBE VALVE IS PRIMARILY INDICATED FOR GRAVITY
DRAINAGE OF THE CHEST CAVITY.
THE DEVICE ALLOWS THE EVACUATION OF LIQUIDS AND/OR AIR, WHILE PREVENTING
THE BACKFLOW TOWARDS THE PATIENT.
THE DEVICE FACILITATES NORMALIZATION OFINTRATHORACIC PRESSURE. 1 WAY
PNEUMOTHORAX ASPIRATION, STERILE DISPOSABLE UNIVERSAL BARBED TUBE
FITTING.
UNIT OF ISSUE: EACH
..
SHALL HAVE A SHELF LIFE OF 36 MONTHS.
NOT MORE THAN 7 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE
GOVERNMENT.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SHELF-LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MMS1A. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURER, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER.,,,, ,, .. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
SPE2DS-26-T-107M
SECTION B
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-690-3796 Quantity: 10 EA Purchase Request: 7016917729QTY: 10 Delivery: 5 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS