Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

VARIOUS FASTENERS - DRAWING REQUIRED

Awarded

SPMYM326P6045Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled VARIOUS FASTENERS - DRAWING REQUIRED has been awarded in its entirety as a Total Small Business Set-Aside under FAR 19.5, ensuring eligibility and participation exclusively by small businesses. It is identified by solicitation number SPMYM326P6045 and falls under NAICS code 332722, which pertains to screw, nut, and bolt manufacturing. The award was issued by DLA Maritime - Portsmouth, an office within the Department of Defense, with the primary office located in Portsmouth, New Hampshire. Performance of the contract will take place in Kittery, Maine. Primary point of contact is Jannell Moriarty, reachable via phone and email, with a secondary contact provided through the DLA-KME EMAIL BOX for quotation-related inquiries. The contract requires specific drawings to be provided by the vendor, indicating technical precision and custom specification compliance. The posting date is May 12, 2026, and the full details can be viewed through the SAM.gov portal.

General Info

Small business set-aside for precision fasteners, performance in Kittery, Maine, managed by DLA Maritime.

Agency

Department Of Defense → DLA Maritime - PortsmouthView Agency

Contract Value

$50,909.32

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Kittery, ME, 03904, USA

Set-Aside

SBA

Awardee

TANTALUM BOLT & FASTENER, LLCView Profile

Award Issued Date

05/11/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 12

Award Notice

AwardedMay 11

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Portsmouth

Contacts2 people available

OfficePORTSMOUTH, NH, 03801-5000, USA

Organization / Agency

Department Of Defense → DLA Maritime - Portsmouth

View Agency Profile

Office AddressPORTSMOUTH, NH, 03801-5000, USA

Contacts

Jannell Moriarty

contact@example.gov

+1 (555) 000-0000

DLA-KME BOX

contact@example.gov

Full Description

Show more

Awarded in its entirety.

Similar Contracts

Same NAICS industry code

Supply of Hexagon Nuts (NSN 5310-01-652-3825)

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Critical Application Machine Screw Supply

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Plain Hexagon Nuts (NSN 5310-00-282-5658)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-00-914-6130)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Critical Safety Machine Bolts

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Supply of Grooved Headless Pins (NSN 5315014178548)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Socket Head Cap Screw Manufacturer/Supplier

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPEA46-26-T-25NF

Solicitation SPEA46-26-T-25NF is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of one plain hexagon nut, identified by NSN 5310-01-630-8285 and technical specification SAE International Q583 P/N J2295J995C2R08-XG5. The requirement is categorized under NAICS code 332722. Delivery is required within 10 days of order, with an original required delivery date of July 22, 2026. The shipment is designated as FOB Origin and is to be delivered to the US Army SSA W58MKR in Zaczernie, Poland. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods based on MIL-STD-1916 or ASQ H1331. The procurement incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity requirements. Payment processing must be handled electronically through the Wide Area Workflow system.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-05Q3

This solicitation from the Department of Defense Land Supply Chain is for the procurement of two access covers, identified by NSN 5340-01-461-0652. The contract requires delivery within 20 days after the order is placed and is subject to full and open competition. It incorporates specific technical and quality requirements from the DLA Master List, including strict packaging standards and the prohibition of Class I ozone depleting chemicals. The agreement includes rigorous security and compliance mandates, specifically requiring adherence to Covered Defense Information and CMMC Level 2 certification. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. All responses must be submitted by September 11, 2026.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE4A0-26-T-4689

Solicitation SPE4A0-26-T-4689, issued by DLA Aviation, is a request for quotations for 12 units of hexagon head cap screws under NSN 5305017146483. The procurement is categorized under NAICS 332722 and requires delivery to the Pearl Harbor Naval Shipyard in Hawaii within five days after order. The items must comply with basic specification MIL-DTL-1222J and follow specific packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA requirement RP001. The contract specifies destination inspection and acceptance, utilizing sampling methods from MIL-STD-1916 or ASQ H1331. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and invoicing must be processed through the Wide Area WorkFlow system. Evaluation preferences are available for certified HUBZone small businesses, and the government will not consider offers utilizing additive manufacturing.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7M0-27-Q-0016

Solicitation SPE7M0-27-Q-0016 is an urgent and compelling emergency requirement issued by DLA Land and Maritime for the procurement of four machine bolts, identified by NSN 5306-01-286-0864. This firm fixed price acquisition requires the hardware to be manufactured according to the current revision of the applicable part standard, specifically ASME B18.2.1 Revision D. Due to the emergency nature of the buy, the government will evaluate quotes based on both price and the fastest possible delivery, reserving the right to award the contract prior to the closing date of September 18, 2026. The contract specifies that inspection and acceptance will occur at the destination, with delivery to the Pearl Harbor Naval Shipyard in Hawaii. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and MIL-STD-130N. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

NUT, SELF-LOCKING, HEXAGON

Solicitation # SPE4A6-26-R-XD63

Solicitation SPE4A6-26-R-XD63 is a request for quotation issued by DLA Aviation for the procurement of 9,000 self-locking hexagon nuts (NSN 5310-99-702-3861). The item is designated as a Commercial Off-the-Shelf product and an Air Force Critical Safety Item, requiring strict adherence to quality and traceability standards. All requests for waivers or deviations must be approved by the DSC contracting officer. The award will be based on a best-value determination, weighing price and past performance, with a heavy emphasis on SPRS assessments and historical quality and delivery compliance. Delivery is required within 560 days after receipt of the order, with inspection and acceptance occurring at the origin. The supplies are to be delivered to DLA Distribution Warner Robins in Georgia. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow RP001 requirements. The contract incorporates several critical regulatory standards, including SAE AS9100 for quality, DFARS 252.204-7012 for safeguarding covered defense information, and the Buy American Balance of Payments Program. Invoicing and payment processing are to be managed through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Maritime - Portsmouth

Same awarding agency

Supplier of Left-Hand Thread Hex Jam Nuts (Grade-2)

Rubber Product Manufacturing for Mechanical Use

POSTED

DEADLINE

Supplier of Right-Hand Thread Hex Jam Nuts (Grade-5)

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

DEADLINE

Solicitation # SPMYM326Q8032A

The Portsmouth Naval Shipyard, under DLA Maritime, is soliciting quotes for the procurement of various Hex Jam Nuts under solicitation number SPMYM326Q8032. The requirement includes 0.875-14UNF-2B washer-faced nuts in both right-hand and left-hand thread directions, specified under MIL-DTL-1222 and ASTM-B18.2.2 standards, with materials ranging from SAE J995 Grade 2 to Grade 5 steel. The award will be based on the Lowest Price Technically Acceptable (LPTA) evaluation criteria, and vendor responsibility will be determined using the Supplier Performance Risk System (SPRS). Interested contractors must be registered in the System for Award Management (SAM) and submit quotes via email to the designated points of contact by September 15, 2026. To access technical drawings, offerors must first submit a signed Security Agreement and an approved DD Form 2345. The contract includes specific data requirements, such as Certificates of Compliance and Certification/Data Reports, as detailed in the associated Contract Data Requirements Lists. All submissions must include pricing, FOB point, Cage Code, and a preference for payment via Government Commercial Purchase Card or Wide Area Workflow.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Secure Packaging, Labeling, and ShippingThe contract involves providing secure, military-standard packaging and labeling services in strict accordance with specified DATA ITEM NO. requirements. The scope includes preparing shipments to meet all necessary military specifications and ensuring delivery to the designated destination, FOB Destination, in Kittery, Maine. This subcontract is set aside entirely for small businesses, following the SBA Total Small Business Set-Aside guidelines under FAR 19.5, with the NAICS code 561910, which pertains to packaging and labeling services. The contracting agency responsible for this procurement is the Department of Defense, specifically DLA Maritime - Portsmouth. The contract is structured to ensure compliance with all specified packaging, labeling, and shipping mandates to support military logistics. The place of performance is Kittery, Maine, with the focus on meeting precise shipment requirements to facilitate secure and timely delivery as stipulated in the contract terms.

Packaging and Labeling Services

POSTED

DEADLINE

Compliance Documentation & Certification ServicesThe contract focuses on the preparation and validation of military compliance documentation, including Certificates of Compliance and Contract Data Requirements List (CDRL) data packages. It is a subcontract opportunity designated as a Total Small Business Set-Aside under FAR 19.5, aimed at businesses classified under the NAICS code 541690. The contracting agency is the Defense Logistics Agency (DLA) Maritime located in Portsmouth, under the Department of Defense. The work is to be performed in Kittery, with the ZIP code 03904. This subcontract involves ensuring that all compliance documentation meets military standards and regulatory requirements, which is critical for maintaining certification and operational readiness. The solicitation was posted on April 16, 2026, and it offers small businesses an opportunity to contribute to defense logistics by providing specialized compliance and certification services.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Material Testing and Certification ServicesThe contract involves third-party chemical and mechanical testing of fastener materials, ensuring that the materials meet specific military standards. These tests will be accompanied by certified reports verifying compliance, which is critical for maintaining the integrity and reliability of fasteners used in defense applications. The scope includes both chemical composition analysis and mechanical performance evaluations, reflecting stringent quality control measures required by the Department of Defense. This subcontract is a total small business set-aside under the SBA guidelines, designated under NAICS code 541380, which covers testing laboratories. The contract is issued by DLA Maritime - Portsmouth and the work will be performed in Kittery, ZIP code 03904. The arrangement supports the Department of Defense's commitment to sourcing reliable, small business partners for specialized technical services that ensure material certification aligns with military specifications.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Fastener Manufacturing – Hex Head Cap ScrewsThe contract calls for the manufacturing of hex head cap screws in accordance with the specifications QQ-N-2810 Amend 2 and QQ-N-286G. The scope includes complete material verification, precise machining, and finishing processes to ensure the fasteners meet rigorous quality and performance standards. This subcontract is designated as a total small business set-aside under the SBA guidelines, indicating that only small businesses are eligible to participate. Managed by the Defense Logistics Agency Maritime at Portsmouth on behalf of the Department of Defense, the work will be performed in Kittery, zip code 03904. The contract falls under the NAICS code 332722, which pertains to precision turned product manufacturing. The procurement emphasizes compliance with federal acquisition regulations and strict adherence to specified material and manufacturing standards to support defense-related fastener requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Precision Fastener Manufacturing – Socket Head Cap ScrewsThis contract involves the manufacturing of precision socket head cap screws compliant with ASTM F468-23 standards and applicable military specifications. The scope includes the full production process such as machining, heat treatment, and comprehensive quality control to ensure the fasteners meet strict performance and durability requirements. The contract is structured as a subcontract and is designated as a Total Small Business Set-Aside under FAR 19.5, aiming to support eligible small business participation. The contracting agency is the Defense Logistics Agency (DLA) Maritime based in Portsmouth, operating under the Department of Defense. The place of performance is identified as Kittery with the postal code 03904. The relevant North American Industry Classification System (NAICS) code for this contract is 332722, which corresponds to the manufacture of precision turned products. The contract was posted on April 16, 2026, and no solicitation number or specific point of contact details are provided.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Technical Data and Engineering Support

Engineering Services

POSTED

DEADLINE

On-Site Installation and Integration Support

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Sonar Dome Fairing Manufacturing – NSN 5845-01-498-5017

POSTED

DEADLINE

Sonar Dome Fairing Manufacturing – NSN 5845-01-498-5028

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS