This Sources Sought opportunity from General Services Administration was posted on October 23, 2013. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Vector II - Targeted Acquisition of Plug in Electric Vehicles (PEVs) and Supporting Infrastructure - Request for Information (RFI)

Closed

QMAA-JC-130021-DFederal

Submission Closed10/15/2013, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336111

New

SLED

Radio Service Truck Supply and IntegrationThis subcontract for Radio Service Truck Supply and Integration involves the procurement and delivery of one fully equipped Radio Service Truck intended for prime contractors on Department of Justice vehicle procurements. The scope of work includes procuring the base vehicle chassis and integrating essential service body components, radio-specific mounting, and electrical systems in strict accordance with manufacturer specifications. The selected provider must ensure the vehicle is fully operational upon delivery and adheres to all Department of Justice warranty and purchase order terms. This opportunity is categorized under NAICS code 336111 and is associated with the state of Montana, with a response deadline set for October 23, 2026.

POSTED

DEADLINE

Base Vehicle SupplyThis subcontract, issued by the Town of Caledon, governs the supply of one new upfitter-ready vehicle intended for prime contractors working on Caledon Fire and Emergency Services projects. The vehicle must feature a red exterior, forged bright aluminum rims, a chrome front grille, full-length running boards, and a close-assist sliding passenger-side door. Interior specifications include leather and vinyl front seats along with both front and rear HVAC systems. The procurement is categorized under NAICS code 336111 and requires the delivery of a chassis equipped with an upfitter-ready electrical system. Interested parties should note that the solicitation was posted on October 19, 2026, with a response deadline set for November 13, 2026.

POSTED

DEADLINE

Heavy-Duty Cutaway Chassis SupplyThis subcontract agreement establishes the supply of commercial cutaway chassis for prime contractors working on vehicle procurement projects for the Blue Valley Unified School District 229. The required equipment must be a Ford E450 or an equivalent model featuring a 7.3L V8 gasoline engine, a wheelbase between 176 and 178 inches, and a gross vehicle weight rating ranging from 14,500 to 19,500 lbs. Key technical specifications include the integration of heavy duty hydraulic brakes, a 78-Amp-hr battery, and a 40-gallon fuel tank. The successful provider is responsible for delivering a completed, road-ready chassis on an F.O.B. Destination basis. The solicitation was posted on October 16, 2026, with a response deadline of October 28, 2026.

Blue Valley School District

POSTED

DEADLINE

Transit Bus Manufacturing (OEM)This subcontract opportunity with the City of Edmonton involves the manufacturing, supply, and delivery of new and leased low-floor, heavy-duty transit vehicles. The selected provider will be responsible for producing buses across multiple powertrain options, including Diesel, Diesel Hybrid, Battery Electric, and Hydrogen Fuel Cell, ensuring all units meet the specific requirements outlined in Schedule C. The scope of work includes managing all production milestones and coordinating the delivery of fully operational transit buses to the City or designated upfitters within Edmonton. Interested parties must submit their responses by November 30, 2026, to be considered for this transit infrastructure project.

POSTED

DEADLINE

Heavy-Duty Chassis Supply (Type III)This subcontract involves the supply of two new 2024 or newer Type III heavy-duty vehicle chassis for Government of Yukon ambulance projects. The supplier must provide complete chassis from Chevrolet/GM, Dodge, or Ford that are compatible with modular body mounting using vibration-isolating rubber mounts and high-strength fasteners. All provided vehicles must strictly adhere to current Canadian Motor Vehicle Safety Standards. The selected provider is responsible for delivering the rolling chassis directly to the designated upfitter. This procurement is categorized under NAICS code 336111, with a response deadline set for November 12, 2026.

POSTED

DEADLINE

2027 Ford F550 Chassis ProcurementThis subcontract involves the procurement of a 2027 Ford F550 XL 2-door 4-wheel drive chassis to support fire apparatus projects for the Washington County Board of Commissioners in Georgia. The specified vehicle must feature a 169.3 inch wheelbase and an 84 inch cab to axle measurement. The selected provider is responsible for delivering the completed chassis directly to the body manufacturer's facility. Upon delivery, the chassis must undergo a thorough inspection of all fluids and a verification that all order specifications have been met.

Washington County Board of Commissioners

POSTED

DEADLINE

Fleet Acquisition & UpfittingThis subcontract for Fleet Acquisition and Upfitting supports NEORide projects by providing both standard and wheelchair-accessible vehicles to prime contractors. The scope of work includes the installation of ADA-compliant accessibility features such as ramps, lifts, and securement systems, as well as the integration of necessary onboard operations hardware and agency-specific branding and wraps. The project is managed under NAICS code 336111 for the state of Ohio. Interested parties must adhere to the timeline established by the October 12, 2026, posting date, with a final response deadline set for November 20, 2026. The ultimate goal of the contract is the delivery of a fully branded, operational, and accessible vehicle fleet.

POSTED

DEADLINE

Supply of Cargo/Utility ATVsThis subcontract, issued by the US Embassy San Salvador for the Department of State, requires the supply of two factory-new 4x4 Cargo/Utility ATVs for prime contractors operating in El Salvador. The vehicles must meet the specifications of the John Deere XUV825 S4 Gas model, featuring an 812cc displacement and a cargo box capacity of 1,000 lbs. All units must be delivered with the corresponding Operation Manuals and Manufacturer's Certificate of Origin. Performance will take place in Antiguo Cuscatlan, with a strict prohibition against the use of Chinese-branded or controlled components. Interested parties must adhere to the response deadline of October 26, 2026, as outlined in the solicitation posted on October 8, 2026.

US Embassy San Salvador

POSTED

DEADLINE

Supply of Passenger/Utility ATVsThis subcontract through the US Embassy San Salvador involves the procurement of two factory-new 4x4 Passenger/Utility ATVs to support prime contractors on Department of State projects in Antiguo Cuscatlan, El Salvador. The vehicles must meet the specifications of the Polaris RZR XP 4 1000 Ultimate Stealth, featuring a 999cc displacement, AWD/2WD capabilities, and a specialized anti-corrosion chassis coating. All delivered units must include the original Manufacturer's Certificate of Origin and Operation Manuals. A critical compliance requirement of this contract is the strict prohibition of any components that are branded or controlled by Chinese entities.

US Embassy San Salvador

POSTED

DEADLINE

Mid-Size Sedan and Hybrid Vehicle SupplyThis subcontract agreement focuses on the supply of new 2026 or 2027 model year mid-size, four-door, front-wheel drive sedans with five-passenger capacity. These vehicles are intended for prime contractors working on procurement projects for the Iowa Department of Administrative Services. The contract covers specific vehicle configurations, including SED 1, SED 2, HEV 10, and HEV 11 specifications, with trim packages defined by individual Vehicle Specification Worksheets. The scope of work requires the delivery of these configured vehicles directly to the designated agency or prime contractor, with performance centered in Des Moines. The solicitation was posted on October 8, 2026, with a response deadline of October 22, 2026, falling under NAICS code 336111 for automobile manufacturing.

Department of Administrative Services

POSTED

DEADLINE

Heavy-Duty Diesel Box Truck ChassisThis subcontract involves the procurement of one new heavy-duty diesel-powered truck chassis to support prime contractors working on City of Columbus Department of Building and Zoning projects. The required chassis must meet or exceed Freightliner SD-114 specifications and be rated for a high gross vehicle weight to accommodate a 25,000lb van body and 20,000lbs of additional weights. The selected provider must ensure the vehicle complies with all DOT, FMVSS, and Federal axle load laws. The contract is for a single unit delivered FOB Destination, with a response deadline set for November 5, 2026.

POSTED

DEADLINE

Heavy-Duty Conventional Chassis SupplyThis subcontract, managed by the State Fiscal Accountability Authority for South Carolina, requires the supply of a current model year Freightliner M2-106 conventional chassis or a certified equivalent. The equipment is intended for prime contractors working on mobile unit projects for the South Carolina Department of Employment and Workforce. Technical specifications mandate a gross vehicle weight rating of at least 25,000 lbs and a wheelbase of approximately 226 inches, ensuring the chassis is road-ready for body integration and compliant with all Federal Motor Vehicle Safety Standards for multi-purpose passenger vehicles. The solicitation was posted on October 6, 2026, with a response deadline of October 23, 2026. Classified under NAICS code 336111, this opportunity focuses on the procurement of heavy-duty conventional chassis to support state-level mobile service initiatives.

State Fiscal Accountability Authority

POSTED

15 days ago

DEADLINE

in 2 days

General Info

Agency

General Services Administration → Gsa/fas Office Of Acquisition Opera

NAICS

336111 - Automobile Manufacturing

Place of Performance

2200 Crystal Drive, Room 10046B, ARLINGTON, VA, 22202, USA

Set-Aside

NONE

Documents

Industry_Day_Notice_VECTOR_II_October_2013.docx

Industry_Day_Notice_VECTOR_II_Revised_November_7_2013_Date.docx

Industry_Event_Announcement.docx

Vector_II_RFI_v5_June_24_2013.docx

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

4 updates

PhaseClosed

PostedJun 24

Sources Sought

Notice updatedSep 19

The notice description changed.

Notice updatedSep 19

Notice details unchanged. Attachments may have changed.

Notice updatedOct 2

Response deadline changed from Jul 31, 2013 to Oct 15, 2013. The notice description changed.

Response DeadlineOct 15

Deadline has passed

Notice updatedOct 23

The notice description changed.

Submission Closed

10/15/2013, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeneral Services Administration → Gsa/fas Office Of Acquisition Opera

Contacts1 person available

OfficeWASHINGTON, DC, 20405, USA

Organization / AgencyGeneral Services Administration → Gsa/fas Office Of Acquisition Opera

Office AddressWASHINGTON, DC, 20405, USA

Contacts

Sarim H. BaigContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

ATTENTION: Due to the Government Shutdown, the Vector II Industry Day scheduled for October 15, 2013 has been POSTPONED until further notice. Information regarding the new date will be posted on FBO.gov once a new date for the event has been established. Thank you for your cooperation.