Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicular Body Panel Supplier

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of 110 units of Vehicular Body Panels, identified by NSN 2510015363578, to support prime contractors under DLA supply contracts. The selected supplier is responsible for the fabrication or procurement of these panels in strict accordance with NSN specifications. Quality assurance is a critical component of the agreement, requiring sampling and inspection performed per MIL-STD-1916 or ASQ H1331, with final packaging completed according to MIL-STD-2073-1E. Managed by the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 336390. The place of performance is located in Texarkana, Texas. Interested parties must have submitted responses by the deadline of November 16, 2026, to provide the finished and packaged components as required.

General Info

Procurement of 110 Vehicular Body Panels for DLA in Texarkana, Texas by 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

336390 - Other Motor Vehicle Parts Manufacturing

Place of Performance

TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-27-T-0751.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL, BODY, VEHICULAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 110 units of Vehicular Body Panels (NSN: 2510015363578) for prime contractors on DLA supply contracts. Fabricates or procures body panels meeting NSN specifications, performs quality sampling and inspection per MIL-STD-1916 or ASQ H1331, and packages components per MIL-STD-2073-1E. Delivers 110 finished, packaged vehicular body panels.

Similar Contracts

Same NAICS industry code

Vehicular Anti-Lock Brake (ABS) Sensor SupplierThis subcontract involves the supply of two vehicular anti-lock brake sensors for prime contractors supporting the DLA Weapons Support Land Supply Chain. The supplier is responsible for manufacturing or sourcing sensors identified by NSN 2530-01-654-6932 and PN 024-204-00, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The agreement mandates strict compliance with the Buy American Act and prohibits the use of additive manufacturing unless specific authorization is granted. Performance for this contract is centered at Fort Leonard Wood, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Manufacturing and Supply of Vehicular Equipment Kit (NSN 2541017279469)This subcontract involves the manufacturing and supply of one complete Vehicular Equipment Kit, identified by NSN 2541017279469, for prime contractors supporting DLA Weapons Support projects. The contractor is required to produce part pieces in strict accordance with TDP Rev C Gen 6 and specific reference drawings 19207 12422608 and 19207 12414308. All materials must be certified as asbestos-free and manufactured without the use of Class I ozone-depleting chemicals, with final packaging adhering to MIL-STD-2073-1E standards. Managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations, the project falls under NAICS code 336390. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

HMMWV Mounting Cap and Storage Assembly FabricationThis subcontract involves the fabrication and delivery of a complete mounting cap unit for HMMWV vehicles to support DLA Weapons Support Land Supply Chain contracts. The scope of work includes the fabrication of the main cap, the integration of a bulkhead kit and side storage compartments, and the application of a sand-color industrial coating. The final deliverable consists of one fully completed mounting cap unit inclusive of all storage and bulkhead components. The contractor must adhere to strict regulatory and environmental standards, including the prohibition of Class I ozone-depleting chemicals and compliance with NIST SP 800-171. Additionally, the provider is required to meet all domestic material disclosure requirements. Performance for this project is centered in Dagsboro, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M3-27-T-0821

Solicitation SPE7M3-27-T-0821 is a small business set-aside request for quotations issued by the DLA Weapons Support Fluid Handling Division for the procurement of 22 wrought copper straight pipe-to-tube adapters. The items must be 1.00 inch nominal size, FTG X MNPT, and consistent with NIBCO 60421. This is a commercial off-the-shelf procurement under NAICS code 336390, with the required delivery date set for October 30, 2026, and a delivery window of 20 days after receipt of order. The contract specifies FOB Origin terms with inspection and acceptance occurring at the destination, specifically Hill AFB, Utah. Packaging must comply with RP001 and ASTM D3951, while marking and labeling must adhere to MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity reporting under DFARS 252.204-7012.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

TANK, FUEL, ENGINE

Solicitation # SPE7L1-27-T-3269

Solicitation SPE7L1-27-T-3269 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 20 steel engine fuel tanks. These tanks are designated as critical application items and must have a 1-1/2 U.S. gallon capacity with specific rectangular dimensions of 10-3/4 inches in length, 5-5/8 inches in width, and 6-3/8 inches in height, adhering to Briggs and Stratton Corp part numbers 291488 and 292367. The required delivery date is November 6, 2026, with a delivery lead time of five days. Shipping is FOB Origin, and the final destination is the Government of Israel Ministry of Defense. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Inspection and acceptance will occur at the point of origin. The procurement incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Offers involving additive manufacturing are ineligible for award. Quotations must be submitted by November 16, 2026, and invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

EQUIPMENT KIT, VEHICULA

Solicitation # SPE7L3-27-T-1700

Solicitation SPE7L3-27-T-1700 is a small business set-aside issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of one vehicular equipment kit, identified by NSN 2541-01-727-9469. The items must be manufactured in accordance with TDP Rev C Gen 6 and associated reference drawings. Key material restrictions include a strict prohibition on asbestos and Class I ozone depleting chemicals. The delivery timeline is 324 days after receipt of order, with the place of performance and delivery located in New Cumberland, Pennsylvania. Inspection and acceptance are designated at the origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract incorporates rigorous quality and packaging standards, including MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Offerors must be certified under the US/Canada Joint Certification Program (JCP) to access export-controlled data and must utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing. Compliance with DFARS regulations regarding cybersecurity, specifically safeguarding covered defense information and CMMC Level 2 requirements, is mandatory. Additionally, the solicitation provides a price evaluation preference for HUBZone small business concerns and requires adherence to the Buy American Act and Berry Amendment for domestic material preferences.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L1-27-T-3270

Solicitation SPE7L1-27-T-3270 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one flat belt, identified by NSN 3030016311206 and part number 58512 from Amerex Corporation DBA Getz. The requirement specifies a delivery timeline of five days after the order is placed, with shipping terms set as FOB Origin. The item is to be delivered to the US Army 0215 CS BN CO A Distribution at Fort Hood, Texas. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while following DLA packaging requirements for procurement. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. Additionally, the contract incorporates various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and cybersecurity incident reporting. All quotes must be submitted through the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

DEFLECTOR, DIRT AND LIQ

Solicitation # SPE7L1-27-T-3294

Solicitation SPE7L1-27-T-3294 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for one dirt and liquid deflector, identified by NSN 2530-01-547-6519. The required hardware must conform to drawing 12489748 and MIL-DTL-12560, with a delivery timeframe of 10 days after order. Performance is based on FOB Origin terms with the place of delivery located at Fort Irwin, California. The contractor is required to provide a Certificate of Quality Compliance (COQC) for all delivered supplies, with separate certificates required for each manufacturing lot. Quality standards mandate that the manufacturer's inspection system comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging and marking must adhere to SPI AK15476519, MIL-STD-2073-1E, and MIL-STD-129, with specific restrictions on nomenclature for protected cargo. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and the iRAPT system for electronic COQC submission. The solicitation includes a price evaluation preference for HUBZone small business concerns and strictly prohibits the use of additive manufacturing unless specifically authorized. Additionally, the contract incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and CMMC Level 2 certification requirements for cybersecurity.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

RACK, AMMUNITION STOWAG

Solicitation # SPE7L1-27-T-3251

Solicitation SPE7L1-27-T-3251 is a small business set-aside procurement issued by the DLA Weapons Support Land Supply Chain for one ammunition stowage rack, identified by NSN 2590-01-560-5169. The requirement includes a first article test and mandates adherence to a comprehensive set of technical drawings and quality assurance plans. Delivery is specified as 155 days after delivery order, with the place of performance located at Fort Campbell. The contract requires the item to be produced in accordance with specific source control drawings and ISO 9001:2015 quality standards. The contract imposes strict regulatory and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls for technical data. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA requirement RP001. Inspection and acceptance are designated at the origin, specifically at the actual manufacturing facility, and require a technical inspection. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

Supply of Bumper Modules, Gussets, and Vertical Posts for Gillig BusesThis subcontract focuses on the supply of structural and exterior body components for prime contractors working on Southwest Ohio Regional Transit Authority inventory projects. The scope of work specifically involves the provision of RH/CS Rear Bumper Modules, Large Gussets, and Exterior Vertical Rear C/S Posts for the 1300s series Gillig Low Floor chassis. All deliverables must comply with the regulatory requirements of 49 U.S.C. Section 5325(j)(2)(D). The contract is categorized under NAICS code 336390 and is managed through the Ohio Inventory agency.

POSTED

about 6 hours ago

DEADLINE

in about 17 hours

Supply of Tie-Rod Ends for Gillig Low Floor BusesThis subcontract involves the supply of specialized steering components for prime contractors supporting Southwest Ohio Regional Transit Authority inventory projects. The scope of work requires the delivery of eight right-hand tie-rod ends, part number 334935, and eight left-hand tie-rod ends, part number 334937, specifically designed for compatibility with Gillig Low Floor bus specifications. All provided components must be original equipment manufacturer or approved non-OEM parts that comply with the standards set forth in 49 U.S.C. Section 5325(j)(2)(D). The procurement falls under NAICS code 336390 and is managed through the Ohio Inventory agency.

POSTED

about 6 hours ago

DEADLINE

in about 17 hours

29--FILTER ELEMENT,INTAKE

Solicitation # SPE7L4-27-U-0133

Solicitation SPE7L4-27-U-0133 is a total small business set-aside for a unilateral Indefinite Delivery Contract issued by the DLA Weapons Support LSO Combat Vehicles and Armament. The requirement is for one estimated unit of an intake air cleaner filter element, NSN 2940009103065, which is designated as a critical application item used on cargo trucks, wreckers, and tanks. The filter must be constructed of pleated paper filtering media with a nominal outside diameter of 11 inches, a nominal height of 13.5 inches, and a nominal inside diameter of 6.75 inches. Approved manufacturers include Genuine Parts Company, WIX Corp, Deluxe Products Div Walker Mfg Co, Caterpillar Inc, Cummins Filtration, Hastings Manufacturing, ArvinMeritor, Honeywell International, Champion Laboratories, Donaldson Company, and Baldwin Filters. The contract has a maximum value of 350,000.00 dollars with delivery required within 62 days after order. Shipping is FOB Origin, while inspection and acceptance occur at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Award will be granted to the responsible offeror whose quote is determined to be most advantageous to the government based on price and other factors. Notably, quotes involving parts made via additive manufacturing are ineligible for award unless prior approval is obtained from the contracting officer.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Groove Pulley Supplier (NSN 3020-01-647-9009)This subcontract involves the supply of one Groove Pulley, part number SPZ-100X3/1610, for prime contractors supporting DLA Weapons Support projects. The hardware must strictly adhere to NSN 3020-01-647-9009 specifications and comply with the Buy American Act as well as the DLA Master List of Technical and Quality Requirements. Packaging must be completed using heat-sealed barrier bags in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The final product is to be delivered FOB Destination to the USS MARINETTE (LCS 25). This requirement is managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, falling under NAICS code 332510. The response deadline for this opportunity is November 16, 2026.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Accessories Stowage Box (NSN 2540016991929)This subcontract involves the procurement and delivery of one Commercial Off-The-Shelf accessories stowage box, specifically part number CSD242416 from Hoffman Engineering Co. with NSN 2540016991929. The hardware is intended for primes delivering DLA supply contracts to the USS INDIANAPOLIS LCS 17. The contract is managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The supplier must ensure all packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards and maintain full compliance with the Buy American Act. Delivery of the item is required FOB Destination to FPO 34087. The response deadline for this requirement is November 16, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors on DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work involves providing specialized packaging, packing, and labeling for non-hazardous materials. All activities must adhere to strict military and industry standards, specifically ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, utilizing approved MIL-SPEC materials and industrial labeling systems. The final deliverables consist of properly processed shipments ready for transport to New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and is managed through the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Precision Machining and Fabrication of Access Door HingesThis subcontract involves the precision machining and fabrication of five custom access door hinges for the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is required to manufacture the components according to drawings 78286 SS3995 (Rev 01) and 78286 SS9209 (Rev B) using CNC machining, with a strict prohibition on the use of additive manufacturing. The final deliverables are identified by NSN 5340-01-623-8601. To be eligible, the provider must maintain an ISO 9001:2015 quality system and hold US/Canada Joint Certification Program certification. The project falls under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026.

POSTED

about 6 hours ago

DEADLINE

Supply of Groove PulleyThis subcontract involves the procurement of one Groove Pulley for prime contractors supporting DLA Weapons Support supply contracts. The selected provider is responsible for sourcing or manufacturing a pulley that strictly adheres to the technical specifications of NSN 3020011502226, as well as handling the packaging and delivery of the item to a designated government facility in San Diego. To be eligible, contractors must possess a valid UEI and CAGE code and ensure full compliance with restrictions regarding covered defense telecommunications equipment. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026, under NAICS code 333249 for the Department of Defense.

Other Industrial Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Upper Booster ShaftsThis subcontract involves the manufacture and supply of six Upper Booster Shafts, identified as Part 7018963543, for the Department of Defense under the DLA Weapons Support combat vehicle and armament projects. The scope of work requires precision CNC machining and fabrication conducted in strict accordance with provided technical specifications. The contractor is responsible for ensuring all containers are marked and labeled according to MIL-STD 129 and the 29 CFR 1910.1200 Hazard Communication Standard. Performance of the contract will take place at Hunter AAF, and the project falls under NAICS code 332710.

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract opportunity is for the provision of military-grade packaging and marking services supporting prime contractors for the DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected provider will be responsible for packing items according to MIL-STD-2073-1E standards, specifically utilizing Preservation Method 10, Packing Code A, Level B, and ensuring all markings comply with MIL-STD-129 and RP001 DLA requirements. The final deliverable consists of finished gears that are fully packed and marked for shipment. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 488410 for the Department of Defense. Interested parties must submit their responses by November 18, 2026.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Specialty Metal Material SupplyThis subcontract opportunity is for the supply of raw specialty metal stock to support prime contractors working on DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected provider will be responsible for sourcing metal alloys that strictly adhere to technical drawing specifications and delivering certified raw material stock. A critical requirement of the contract is the provision of Mill Test Reports to ensure full compliance with DFARS 252.225-7008, 252.225-7009, and 252.225-7010 regulations. The procurement is categorized under NAICS code 331210 and is specifically set aside for Service-Disabled Veteran-Owned Small Businesses. Managed by the Department of Defense, the solicitation was posted on November 3, 2026, with a response deadline of November 18, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 6 hours ago

DEADLINE

Precision Spur Gear Fabrication (NSN 3020-01-579-4032)This subcontract opportunity is for the precision fabrication of spur gears under NSN 3020-01-579-4032 to support DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected contractor will be responsible for the precision cutting and grinding of 31 gears, ensuring all finished products are fully inspected and delivered. This effort is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333612. Compliance requirements are stringent, necessitating the implementation of SAE AS9003 or ISO 9001 quality systems and adherence to MIL-STD-1916 sampling standards. Due to the handling of export-controlled data, the contractor must maintain CMMC Level 2 and US/Canada JCP certifications. The solicitation was posted on November 3, 2026, with a response deadline of November 18, 2026.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Elevation Stops (NSN 1005015334091)This subcontract involves the manufacture or procurement of two elevation stops, part number DGMT0014 and NSN 1005015334091, for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. All deliverables must strictly adhere to the Master List of Technical and Quality Requirements as well as DLA Packaging Requirements RP001. Performance for this contract is designated for Hunter AAF. To be eligible, the provider must maintain ITAR registration with the DDTC and ensure full compliance with DFARS 252.204-7012. Additionally, a CMMC Level 2 self-assessment is required. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026, under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military Grade Packaging and LogisticsThis subcontract opportunity, titled Military Grade Packaging and Logistics, is issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The contract is a total small business set-aside under NAICS code 488410. The selected provider will be responsible for supplying packaging materials and performing packing, marking, and palletization services for prime contractors. The scope of work requires strict adherence to military standards, specifically executing preservation per MIL-STD-2073-1E Method 31, marking per MIL-STD-129, and palletization per RP001. The contractor must utilize MIL-SPEC cushioning and containers to ensure finished parts are properly prepared for FOB Origin shipment. Responses are due by November 18, 2026.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Manufacturing of Belt Tension Adjusting ArmsThis subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, requires the precision machining and fabrication of 299 Belt Tension Adjusting Arms. The project involves utilizing CNC milling and turning to produce parts that meet NSN 2920014207894 specifications and OEM part numbers 3802287 or RCSK17562. All work must strictly adhere to RA001 technical requirements and RQ002 configuration management, with a specific prohibition against the use of additive manufacturing. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710. Interested parties must respond by November 18, 2026, to support prime contractors fulfilling DLA Weapons Support obligations.

POSTED

about 6 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

25--ARMOR,TRANSPARENT,VEHICULAR WINDOW

Solicitation # SPE7L3-27-T-1112

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 11 hours ago

DEADLINE

25--CONTAINER,20 FT ISO

Solicitation # SPE7L4-27-T-0110

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 11 hours ago

DEADLINE

Supplier of Anti-Lock Brake Control Units (NSN 2530017191507)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Windshield Washer Valve Supplier

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Exhaust Mufflers (NSN 2990013511671)

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS