Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Vehicular Lamp Unit Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply, packaging, and marking of two vehicular lamp units identified by NSN 6220014792622, with strict adherence to DFARS regulations and all applicable federal shipping standards. The delivery must be fast and fully traceable, ensuring accountability and compliance throughout the logistics chain. The items are part of a subcontract under the Department of Defense, managed by the Defense Logistics Agency, and fall under the NAICS code 335139 for other electrical equipment and component manufacturing. The contract was posted on July 20, 2026, and the place of performance and point of contact details are not specified, but the delivery must align with Department of Defense procurement and distribution protocols to support military vehicle operations.

General Info

Supply two vehicular lamp units per DFARS and DoD standards, traceable delivery, NAICS 335139, DLA-managed subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335139 - Electric Lamp Bulb and Other Lighting Equipment ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply, packaging, marking, and fast traceable delivery of 2 units of vehicular lamp units (NSN 6220014792622) in compliance with DFARS and federal shipping regulations.

Similar Contracts

Same NAICS industry code

Supply of LED Lamps (NSN 6240016102124) for DLA Delivery OrderThe contract pertains to the supply of 24 military-specification LED lamps identified by NSN 6240016102124 and Part Number EFO-X024, manufactured to meet stringent defense standards and delivered under FOB destination terms to Yokosuka, Japan. All units must fully comply with DPAS prioritization and Defense Logistics Agency requirements, ensuring readiness and logistical alignment with Department of Defense procurement protocols. The contract is classified as a subcontract under NAICS code 335139, indicating its placement within the broader electrical equipment manufacturing sector, and is tied to a delivery order managed by the Defense Logistics Agency under the parent contract SPE8EJ21D0042 and delivery order SPE8EJ26F039J. The award is scheduled for posting on July 20, 2026, and all performance obligations are centered on fulfilling accurate technical specifications, timely delivery, and adherence to federal defense logistics mandates. The delivery location specifies Yokosuka as the final destination, requiring the supplier to coordinate international shipping and customs compliance while maintaining end-to-end traceability and documentation for DLA audit purposes. This order reflects a critical supply chain component for military operations, where reliability and specification precision are non-negotiable for operational effectiveness.

Defense Logistics Agency

POSTED

DEADLINE

Indicator Light Manufacturing and AssemblyThe contract entails the full manufacturing, assembly, testing, and delivery of 19 military-specification indicator lights, requiring complete traceability throughout every stage of production to ensure quality and accountability. All work must comply with ISO 9001:2015 quality management standards and meet the stringent requirements of MIL-DT-7961 for military display and indicator devices. The subcontract is issued under the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 335139 indicating classification within other electrical equipment and component manufacturing. The delivery and performance are expected to adhere to military readiness standards, with no flexibility allowed in specifications or documentation. The contract was posted on July 20, 2026, and the place of performance and point of contact details are not specified, though the official record and award details can be accessed via the DIBBS portal using the provided contract number.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Light Emitting Lamps (NSN 6240015724221)The contract entails the supply and delivery of military-specification LED lamps identified by NSN 6240015724221, ensuring full compliance with all applicable defense standards for performance, durability, and operational reliability in field conditions. The vendor is responsible for providing the lamps with appropriate packaging and labeling that meet stringent military requirements, including traceability, barcoding, and environmental protection to ensure readiness and logistical compatibility across deployable systems. Shipment must adhere to scheduled timelines and delivery protocols established by the Defense Logistics Agency to support mission-critical operations. This subcontract, issued under NAICS code 335139 for other lighting equipment, is managed by the Department of Defense through the Defense Logistics Agency. The contract was posted on July 20, 2026, and is linked to award and delivery records under contract SPE7LX21D0087 with delivery order SPE7LX26FB05T. While specific delivery locations and point of contact details are not provided, the terms imply direct support to U.S. military units and maintenance activities requiring standardized, ruggedized lighting components. All deliverables must pass rigorous quality assurance inspections prior to acceptance and integration into military inventory systems.

Defense Logistics Agency

POSTED

DEADLINE

Spotlight Supply and DeliveryThe contract entails the supply and delivery of two military-specification spotlights identified by NSN 6220-01-514-4591 to the Defense Logistics Agency at New Cumberland, with a delivery deadline of 100 days from the contract award. The equipment must meet stringent military standards to ensure operational readiness and compatibility with existing defense systems. This subcontract falls under NAICS code 335139, which categorizes it within the manufacturing of other electrical equipment and components. The contract is administered by the Department of Defense through the Defense Logistics Agency, and while specific performance location details are not provided, the delivery destination is明确ly designated. The contract was posted on July 20, 2026, and is accessible through the DIBBS system via a public link for award records, though no solicitation number or point of contact information is included in the provided data.

Defense Logistics Agency

POSTED

DEADLINE

LIGHT BULB, LARYNGOSCOPThe contract specifies the procurement of light bulbs for laryngoscopes, with the NSN 6515-00-552-9672, requiring three packages, each containing six units, for a total of eighteen bulbs. Each bulb must meet precise technical specifications: translucent white, 2.50 volts, 0.280 amps, with a tubular screw base measuring 0.562 inches maximum, and designed for long life, as mandated by Boehm Surgical Instrument Co. The unit of issue is a package of six, and orders must be placed in multiples of six. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Delivery is required within 20 days after order, to APO 96213-2166. The solicitation, issued under SPE2DS-26-T-253L on July 20, 2026, with a response deadline of July 27, 2026, falls under NAICS code 335139 and is managed by the Department of Defense’s Medical Supply Chain, indicating federal procurement under the DLA system.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

LAMP, INCANDESCENTThe contract pertains to the procurement of five incandescent lamps with NSN 6240-01-054-6996 and part number 687-19, sourced from approved suppliers Grimes Aerospace Company and WAMCO Inc. The unit price is $5.00 per unit, totaling $25.00, with delivery required in 198 days FOB origin to Industries of the Blind Inc. at 6920 West Market Street, Greensboro, NC 27409. All items must comply with DLA packaging requirements per MIL-STD-2073-1E, including specific packaging data coded for preservation, wrapping, and containers, and all marking must conform to MIL-STD-129 with no special marking applied. Palletization follows RP001 standards, and sampling for quality verification must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required in the sample unless otherwise stipulated. Attributes are assigned verification levels or AQLs per classification, and unspeciﬁed attributes are treated as major. Documentation for source approval is required under RC001, and the item is designated as a critical application item. The contract is issued under solicitation SPE4A6-26-T-07VN with a response deadline of July 28, 2026, and the delivery must occur no later than February 12, 2027. Inspection and acceptance are both conducted at the destination, with no tolerance permitted for quantity variance. Transportation logistics are governed by DLAD Proc Notes C19 and C20.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of FOCUS ASSEMBLY, SEARCHLIGHT (COTS Item)The contract requires the procurement and delivery of three units of the FOCUS ASSEMBLY, SEARCHLIGHT, identified by NSN 6230-01-186-9875 and Part Number PL7261-RF, manufactured by Carlisle & Finch Co. The items are classified as commercial off-the-shelf (COTS) and must be delivered within five days of contract award, emphasizing a rapid turnaround. The solicitation falls under the NAICS code 335139, indicating its classification within the broader category of other electrical equipment and component manufacturing. The contract is structured as a subcontract under the Department of Defense, specifically managed by the AVIATION SUPPLY CHAIN ESOC BUYS, with performance targeted to a military postal address in FPO, 96698. The proposal response deadline is set for July 27, 2026, with the solicitation posted on July 19, 2026, allowing a limited window for vendor submissions. This opportunity is not subject to any specific set-aside provisions and is open to qualified vendors capable of meeting the stringent delivery timeline and technical specifications.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacturing of Incandescent LampsThe contract calls for the production of 33 units of incandescent lamps identified by NSN 6240-00-163-5143, with all items required to meet the Department of Defense’s technical and quality standards for commercial off-the-shelf products, including additional enhanced quality controls specific to military use. The work must be performed in compliance with established specifications to ensure reliability and performance under operational conditions, despite the commercial nature of the product. The solicitation, issued under the NAICS code 335139 for other lighting equipment manufacturing, is structured as a subcontract and was posted on July 19, 2026, with proposals due by July 27, 2026. Performance is slated to occur in Phoenix, Arizona, under the oversight of the ASC Commodities Division within the Department of Defense. The contract opportunity is accessible via the DIBBS system, and all deliverables must satisfy stringent military-grade requirements even though the lamps are commercial in origin.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Incandescent Lamp Supply (COTS Item)The contract calls for the supply of 37 units of incandescent lamps identified by NSN 6240013389079 and part number AT135758, classified as commercial off-the-shelf items that meet military specifications. These lamps are to be delivered as a subcontract under the auspices of the ASC Commodities Division within the Department of Defense, with performance required at Greensboro, North Carolina, ZIP code 27409. The solicitation was posted on July 19, 2026, and responses are due by July 27, 2026, indicating a narrow eight-day window for submissions. The NAICS code 335139 corresponds to other lighting equipment manufacturing, confirming the industrial category under which this procurement falls. All items must comply with applicable military standards despite being COTS, ensuring they are suitable for use in defense-related applications without requiring customization or special adaptation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of BASE, LAMPHOLDER (NSN: 6250-01-532-2278)The contract requires the manufacture, quality assurance, packaging, and delivery of 163 units of BASE, LAMPHOLDER identified by NSN 6250-01-532-2278, all produced in full compliance with military specifications. Each unit must be manufactured to meet stringent technical standards, with quality control enforced through MIL-STD-1916 inspection protocols and an Acceptable Quality Level of 0.1, ensuring extremely low defect tolerance. Packaging must adhere to MIL-STD-2073-1E guidelines for preservation and protection during transport, and each unit must be labeled and marked according to MIL-STD-129 for proper military logistics identification. The product is to be delivered to a performance location in Phoenix, Arizona, 85043, under a subcontract arrangement issued by the ASC Commodities Division within the Department of Defense. All work must be completed and submitted no later than the response deadline of July 27, 2026, with production expected to follow the NAICS code 335139 for other electrical equipment and component manufacturing.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Defense-Grade Indicator Light Filter (NSN: 6210013413940)The contract mandates full production, packaging, labeling, and delivery of 140 units of a military-specification indicator light filter identified by NSN 6210013413940 under DLA contract SPE4A6-26-T-07LM. All work must adhere strictly to defense standards, ensuring the product meets the rigorous performance, durability, and safety requirements expected for military applications. The contractor is responsible for end-to-end execution, from manufacturing to final packaging and labeling, with precise attention to specifications to guarantee compatibility and reliability in operational environments. Delivery must be completed to the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, and is classified as a subcontract under NAICS code 335139, which pertains to other electrical equipment and component manufacturing. The agency overseeing the contract is the ASC Commodities Division within the Department of Defense, indicating the item is intended for use by U.S. military forces. Although the solicitation number and point of contact details are not provided, the contract is accessible via the DIBBS portal. Compliance with all defense regulations, timely delivery, and accurate electronic invoicing are critical to meeting contractual obligations and ensuring full payment and acceptance by the government.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

FILTER, INDICATOR LIGHTThe contract pertains to the procurement of 140 units of FILTER, INDICATOR LIGHT with NSN 6210013413940 under solicitation SPE4A6-26-T-07LM, issued by the Defense Logistics Agency’s ASC Commodities Division. The item is classified as a critical application, and the contract specifies a fixed-price structure with a total value of $19,600 at $140.000 per unit. Delivery is required within 145 days from the award date, with a target ship date of December 20, 2026, and delivery must be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, governed by zero-defect sampling criteria per MIL-STD-1916 or equivalent, where critical attributes require a verification level of VII or AQL of 0.1, major attributes IV or AQL 1.0, and minor attributes II or AQL 4.0; unspecified attributes are treated as major unless otherwise defined. Packaging and marking must strictly comply with MIL-STD-2073-1E and DLA Packaging Requirements RP001, with preservation methods identified by code 10, unit container D3, intermediate container E5, and pack code U. Labeling follows MIL-STD-129, including the special marking code 01-01 for Fragile, and requires barcoding using USS-128 or Data Matrix. The item is subject to multiple DFARS clauses addressing cybersecurity safeguards, hazardous materials prohibitions including hexavalent chromium, trafficking in persons, whistleblower protections, and restrictions on telecommunications equipment from adversary nations. Compliance with the Hazard Communication Standard and accurate safety data sheet provision is mandatory. The contract mandates electronic invoicing through Wide Area WorkFlow and prohibits unauthorized obligations or modifications without formal approval. Offerors must provide their Unique Entity Identifier and CAGE Code and represent their small business status via SAM.gov, though no specific socioeconomic certifications are confirmed in the solicitation. All technical and quality requirements are tied to the DLA Master List of Technical and Quality Requirements and incorporated by reference, with revisions controlled based on solicitation issuance or award date depending on acquisition size.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Fuel Additive Supply (FSII, SDA, CI/LI)The contract entails the supply of aviation fuel additives including Fuel System Ice Inhibitor FSII, Static Dissipative Additive SDA, and Corrosion Inhibitor/Lubricity Improver CI/LI in either bulk or pre-mixed formulations, all of which must meet rigorous military performance specifications to ensure seamless integration into operational fuel batches. These additives are critical for maintaining fuel system integrity, preventing ice formation, managing static discharge, and inhibiting corrosion across a wide range of environmental and operational conditions encountered by military aviation platforms. The award is structured as a subcontract under the Defense Logistics Agency within the Department of Defense, with the North American Industry Classification System code 325992 indicating specialty chemical manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to support defense operations without geographic restrictions specified, implying nationwide or global applicability. The contract does not indicate a set-aside classification or specific point of contact, suggesting a broad procurement approach aimed at qualified suppliers capable of meeting stringent military quality and delivery requirements for mission-critical fuel additives.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE