Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicular Maintenance Kit Component Supplier

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of specific vehicular maintenance components for prime contractors supporting DLA Weapons Support Land Supplier Operations Vehicle Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to specifications for Oshkosh Defense LLC P/N 5SK350 and Brighton Cromwell LLC P/N BCA1044KT, delivering these as either individual components or sub-assemblies. All work must be performed in compliance with the DLA Master List of Technical and Quality Requirements RA001. The project falls under NAICS code 333241 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 19, 2026, to be considered for this procurement opportunity.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

333241 - Food Product Machinery Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L3-27-T-0460.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MAINTENANCE KIT, VEHICU

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specific vehicular maintenance components for prime contractors on DLA Weapons Support Land Supplier Operations Vehicle Support projects. Manufactures or sources parts to meet specifications for Oshkosh Defense LLC P/N 5SK350 and Brighton Cromwell LLC P/N BCA1044KT. Must comply with DLA Master List of Technical and Quality Requirements (RA001). Delivers individual components or sub-assemblies.

Similar Contracts

Same NAICS industry code

Solicitation # SPE3SE-27-T-0026

Solicitation SPE3SE-27-T-0026 is a fixed-price request for quotation issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of one Element Assembly (NSN 7310-01-583-1435). The assembly is designed for use in an Oven Hydrovection 52567 Model HV-100-EM and must meet specific technical requirements, including a wattage rating of 12.000 kilowatts and a voltage/current rating of 440.0 AC. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors. The successful contractor must deliver the item FOB Destination to the USS Pinckney DDG 91 within 20 days after receipt of order, with an original required delivery date of October 7, 2026. Packaging must comply with ASTM D3951 and MIL-STD-129, though DLA Master List technical and quality requirements take precedence. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS system, including a realistic delivery schedule, and must be registered in the System for Award Management and Wide Area WorkFlow for payment processing. The acquisition is governed by NAICS code 333241 and incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE3SE-27-T-0022

Solicitation SPE3SE-27-T-0022 is a fixed-price request for quotations issued by the DLA Troop Support Subsistence FSE Supply Chain for one Inverter Drive, identified by NSN 7310-01-583-1448. The procurement is categorized under NAICS 333241, with a required delivery date of October 2, 2026, and a delivery timeline of five days after receipt of order. Performance is located in Pascagoula, Mississippi, with inspection and acceptance occurring at the destination per FAR 52.246-1. Quotes must be submitted via the DIBBS system by October 9, 2026, and must include a realistic delivery schedule. Alternate parts and surplus materials are generally not accepted. The contract mandates strict adherence to DLA Master List technical and quality requirements, including RP001 for packaging and palletization, ASTM D3951 for general packaging, and MIL-STD-129 and MIL-STD-130N for marking and labeling. Material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific NAVSEA-approved functional uses, and prohibit Class I ozone-depleting substances. Compliance with the Buy American Act, Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

ICE MAKING MACHINE, CUB

Solicitation # SPE3SE-27-T-0020

Solicitation SPE3SE-27-T-0020 is a request for quotations issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of one cube ice making machine, NSN 4110014532373, for the USS Minneapolis St Paul (LCS 21). The required unit is a Navy shipboard model with a production capacity of 369 lbs, measuring 14.5 inches wide by 24.5 inches high by 25 inches deep. Technical specifications require the machine to operate on 115V AC, 60 Hz, 1 PH power and utilize R404A refrigerant. The unit must include a marine water leveler and strictly adhere to environmental restrictions prohibiting the intentional addition of mercury or mercury-containing compounds. The contract stipulates a delivery timeframe of 20 days after order, with FOB, inspection, and acceptance all occurring at the destination. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Offerors must comply with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and hazardous material standards. Invoicing and receiving reports are to be processed through Wide Area WorkFlow. Alternate parts are not accepted for this solicitation, and quotes must include a realistic delivery schedule.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

REFRIGERATOR-FREEZER, M

Solicitation # SPE3SE-27-T-0023

Solicitation SPE3SE-27-T-0023, issued by the DLA Troop Support Subsistence FSE Supply Chain, is for the procurement of mechanical food refrigerator-freezers under NSN 4110015424286. The requirement is split across multiple line items totaling 11 units, with specific quantities allocated for delivery to the USNS Mercy, USS Kearsarge, Schofield Barracks in Hawaii, and the North Carolina Army National Guard. Delivery is required within five days after order, with final required delivery dates set for late September and early October 2026. All items are delivered FOB Destination, with inspection and acceptance also occurring at the destination. Technical specifications mandate that only R134A and R404A refrigerants are approved for shipboard use, explicitly prohibiting the flammable propane-based R290A. The contract prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional components like batteries or sensors. Packaging and palletization must comply with RP001 and MIL-STD-2073-1E, while all marking must adhere to MIL-STD-129. Bidders must specify the country of origin and part number, and alternate parts or surplus materials will not be accepted. Invoicing must be processed electronically through the Wide Area WorkFlow system.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Roll-Thru Heated Cabinet

Solicitation # RFP-SEP-2026-10-9

The Southeast Polk Community School District Nutrition Services Department is seeking proposals for the procurement of a Roll-Thru Heated Cabinet to be utilized at Southeast Polk Jr. High School. This solicitation, identified as RFP-SEP-2026-10-9, is managed through the Iowa Department of Administrative Services and will be performed in Polk County, Iowa. Interested parties must submit their responses by the deadline of October 23, 2026, at 5:00 AM UTC. All inquiries and submissions should be directed to Central Procurement via the provided contact information for the Department of Administrative Services in Des Moines.

Department of Administrative Services

POSTED

DEADLINE

Manufacturing of Thrust Washer Bearings (NSN 3120-01-662-7821)This subcontract involves the precision manufacture of three thrust washer bearings under NSN 3120-01-662-7821 for the DLA Weapons Support ASC Commodities Division. The bearings must be produced according to QAP 13873 QAP-B02 Revision B and specific part numbers for either Kamatics Corporation or Electric Boat Corporation. The successful contractor is required to utilize precision machining equipment and maintain strict compliance with RA001 and DFARS 252.204-7012 standards. The final deliverables consist of three finished bearings to be shipped to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 333241 and is managed by the Department of Defense. Interested parties must adhere to the specified response deadline of October 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Annular Ball Bearing Supply (NSN 3110-00-293-9350)This subcontract involves the supply of high-precision annular ball bearings, specifically Timken Co part number 7202WFS160, for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing or sourcing these bearings in strict accordance with TDP Rev A Gen 1 and Reference QAP 13873 QAP-B02 to ensure all technical specifications are met for the delivery of the physical components. Key compliance requirements include adherence to DFARS 252.225-7016 domestic sourcing regulations and a mandate that all supplied bearings be mercury-free. The opportunity is categorized under NAICS code 333241 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, with a response deadline set for October 22, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Food Preparation Table Supplier (P/N BS-T#7)This subcontract involves the manufacture or sourcing of two food preparation tables, part number BS-T#7, for prime contractors supporting the Department of Defense DLA Troop Support Subsistence FSE Supply Chain. The tables must be constructed from food-grade materials and adhere to strict packaging and palletization standards, specifically ASTM D3951, MIL-STD-129, and RP001 guidelines. Additionally, the supplier must ensure full compliance with the Buy American and Balance of Payments Program. The completed units are to be delivered FOB Destination to Springfield, Missouri. Interested parties must respond by October 13, 2026, regarding this requirement categorized under NAICS code 333241.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

in about 11 hours

Thrust Washer Bearing Supplier (NSN 3120-01-485-1838)This subcontract involves the manufacture or procurement of six precision thrust washer bearings for prime contractors supporting DLA Weapons Support ASC projects. The bearings must strictly adhere to NSN 3120-01-485-1838 and RA001 technical specifications. Quality control is mandated through zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with final delivery of the packaged units handled as FOB Origin. Compliance requirements are stringent, requiring the supplier to hold US/Canada Joint Certification Program status and CMMC Level 2 certification. Additionally, all deliverables must meet MIL-STD-129 and ASTM D3951 standards. The project falls under NAICS code 333241 and is managed by the Department of Defense DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

DECANTER, COFFEE MAKER

Solicitation # SPE3SE-27-T-0037

Solicitation SPE3SE-27-T-0037 is a Request for Quotations issued by the DLA Troop Support Subsistence FSE Supply Chain for the procurement of one box of coffee maker decanters, identified by NSN 7310-01-386-5588. The required item is a Commercial Off-The-Shelf product, specifically referencing Bloomfield Industries Part Number 8923. Delivery is required within 20 days after receipt of order, with the destination for shipping, inspection, and acceptance located in Starke, Florida. All quotes must be submitted through the DLA Internet Bid Board System, and offerors are required to provide a realistic delivery schedule and a complete data package for evaluation. Alternate parts and surplus materials will not be accepted for this solicitation. The contract mandates strict adherence to DLA packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List technical requirements taking precedence. Compliance with various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses is required, including those regarding the Buy American and Balance of Payments Program, safeguarding covered defense information, and combating trafficking in persons. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the contractor must comply with specific quality controls, including the removal of government identification from any non-accepted supplies.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

in about 11 hours

FREEZER, MECHANICAL, FOO

Solicitation # SPE3SE-27-T-0039

Solicitation SPE3SE-27-T-0039 is a fixed-price, total small business set-aside request for the procurement of three commercial off-the-shelf mechanical food freezers (NSN 4110014257993). The requirement is split into two line items: one for two units and one for a single unit. Technical specifications require the equipment to operate on 115V AC, 60 Hz, 1PH power and utilize R404A (HP62) refrigerant. The contract explicitly prohibits the use of R290A propane-based refrigerant, as only R134A and R404A are approved for shipboard food service applications. The reference part is National Refrigeration and Air 28233 P/N 2FN. Delivery is required within 20 days after receipt of order, with a final required delivery date of October 6, 2026, shipped FOB Destination to the ARARNG Element, JF HQ at Camp Robinson in North Little Rock, Arkansas. Packaging must adhere to ASTM D3951 and RP001, with labeling compliant with MIL-STD-129. Inspection and acceptance will occur at the destination. Contractors must use the Wide Area Workflow system for invoicing and payment. This procurement is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and strict cybersecurity requirements under DFARS 252.204-7012.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

in about 11 hours

TABLE, FOOD PREPARATION

Solicitation # SPE3SE-27-T-0038

Solicitation SPE3SE-27-T-0038, issued by the DLA Troop Support Subsistence FSE Supply Chain, is for the procurement of two food preparation tables, identified by NSN 7320-01-083-4360 and part number BS-T#7. The contract requires delivery within 20 days after order, with an original required delivery date of October 6, 2026. Shipping is designated as FOB Destination, with both inspection and acceptance occurring at the destination in Springfield, Missouri. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 guidelines. Key regulatory compliance includes the Buy American and Balance of Payments Program, safeguarding of covered defense information per DFARS 252.204-7012, and various FAR clauses regarding equal opportunity and sustainable products. All quotes must be submitted via the DIBBS portal, and alternate parts are strictly prohibited for this solicitation.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

in about 11 hours

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Gun Parts Kit Assembly and PackagingThis subcontract for Gun Parts Kit Assembly and Packaging involves the assembly and packaging of individual components into final kits for prime contractors supporting DLA Weapons Support. The selected provider is responsible for kitting, packaging according to ASTM D3951, marking per MIL-STD-129, and palletization per RP001. The scope of work requires the delivery of 4,000 completed, labeled, and palletized parts kits to DLA Distribution San Joaquin in Tracy, California. To be eligible, the contractor must be ITAR registered and possess the necessary industrial packaging equipment. This opportunity is issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency. Responses are due by October 22, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manganese Phosphate Coating ServicesThis subcontract for Manganese Phosphate Coating Services involves performing specialized chemical coatings on fabricated gun parts for prime contractors supporting DLA Weapons Support. The selected provider must apply manganese phosphate coatings according to specific drawing specifications to ensure metal components meet all required corrosion and wear standards. Performance of this work requires the use of industrial phosphate plating tanks and is subject to inspection by the DCMA QAR. Eligible contractors must be ITAR registered and receive formal approval from the Contracting Officer. The work is associated with NAICS code 332813 and will be performed in Tracy, California. Interested parties must respond by October 22, 2026, to provide these essential services for the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Gun Part Component ManufacturingThis subcontract for Precision Gun Part Component Manufacturing involves the fabrication of individual metal components for gun parts kits supporting DLA Weapons Support contracts. The selected provider will perform high-precision CNC machining, milling, and turning of small arms components in strict accordance with TDP Rev A Gen 6 and the DLA Master List of Technical and Quality Requirements. The final deliverables consist of finished, uncoated precision metal components. To be eligible, contractors must possess high-precision CNC machinery and maintain active ITAR registration and CMMC Level 2 compliance. This opportunity is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt, with performance located in Tracy, California. Responses are due by October 22, 2026.

POSTED

DEADLINE

Solicitation # SPE7L3-27-Q-0031

Solicitation SPE7L3-27-Q-0031 is a request for quotations issued by the Defense Logistics Agency Weapons Support for the procurement of four gun parts kits, identified by NSN 1005-01-518-6043. This item is designated as a critical gun part with unique requirements and is classified as a defense article subject to the International Traffic in Arms Regulations and the Arms Export Control Act. Consequently, manufacturers or exporters must be registered with the Directorate of Defense Trade Controls, and eligible offerors must possess an approved US/Canada Joint Certification Program certification to access export-controlled technical data. The contract mandates strict adherence to specific reference drawings and the DLA Master List of Technical and Quality Requirements, with a specific exception requiring manganese coating if the drawing allows for either zinc or manganese. Quality assurance is rigorous, as certificates of conformance are not authorized. Product inspection will be conducted by the DCMA QAR at the actual manufacturer's facility, and the identities of the manufacturer and phosphate contractor must be approved by the contracting officer. The government may invoke Product Verification Testing, requiring five samples from each subcontractor prior to shipment acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Additionally, the contract incorporates Cybersecurity Maturity Model Certification Level 2 and specific demilitarization standards for small arms weapons. Award will be based on best value, evaluating past performance, delivery, and price.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging for prime contractors delivering to the DLA Distribution Depot Oklahoma. The scope of work requires sealing 29 individual seals in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the contractor must ensure all marking and labeling comply with MIL-STD-129 and MIL-STD-130N, utilizing MIL-STD-2073-IE data. The project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt, with performance taking place at Tinker AFB. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026. The contract falls under NAICS code 561910.

Packaging and Labeling Services

POSTED

DEADLINE

Manufacturer of Plain Seals (NSN 5330-01-062-7241)This subcontract involves the manufacture and delivery of 29 plain seals meeting NSN 5330-01-062-7241 specifications for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Ops Vehicle SPT. The work must be performed without the use of additive manufacturing and will be executed at Tinker AFB. To be eligible, the contractor must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 cybersecurity standards. Additionally, personnel must complete DLA export-control training to ensure full compliance with ITAR and EAR regulations. The response deadline for this requirement is October 19, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Military-Standard Packaging and Marking

Packaging and Labeling Services

POSTED

DEADLINE

Nonmetallic Sleeve Bushing Production (NSN 2530000889573)

All Other Plastics Product Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ProviderThis subcontract involves providing specialized military-grade packaging and palletization services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Ops. The scope of work requires the sealing of items in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. All packaging, marking, and palletization must adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards using industrial sealing and compliant marking systems. The project entails the delivery of 750 sealed and palletized units to be performed in New Cumberland. Interested parties should note the response deadline of October 19, 2026. The contract falls under NAICS code 488410 and is managed through the DLA Weapons Support Land Supplier Opns Vehicle Spt agency.

Motor Vehicle Towing

POSTED

DEADLINE

Preformed Packing Supplier (NSN 5330-01-734-1707)This subcontract involves the manufacture or sourcing of 750 units of preformed packing for prime contractors supporting DLA Weapons Support Land Supplier Ops projects. The required components must match NSN 5330-01-734-1707 and Parker-Hannifin Corp part number VA335 A7259-912. All materials are required to be UV-resistant and must strictly adhere to the DLA Master List of Technical and Quality Requirements RA001. The project falls under NAICS code 326199 and requires full compliance with DFARS 252.204-7012. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 19, 2026, to provide the certified preformed packing units as specified by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging for Rubber/Polymer SealsThis subcontract involves providing specialized protective packaging for rubber and polymer seals to support prime contractors under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The scope of work requires sealing items in medium duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the contractor is responsible for marking and palletization following MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001 to ensure protection against UV deterioration. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Houston, Texas. Interested parties must adhere to the response deadline of October 19, 2026. The final deliverable consists of finished, packaged, and marked seals that meet all specified military standards.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Plain Seals (NSN 5330016322341)This subcontract involves the manufacture and supply of three specialized plain seals under NSN 5330016322341 for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Opns Vehicle Spt projects. The contractor is responsible for ensuring all units meet Federal Supply Classifications 5330/5331 quality control standards and strictly adhere to NAVSEA 5100-003D regulations, which prohibit the use of asbestos and intentionally added mercury. The project is categorized under NAICS code 326199, with the place of performance located in Houston, Texas. Delivery of the seals is required FOB Origin. Interested parties must respond by the deadline of October 19, 2026.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS