Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicular Seat Support Supplier

Active

Federal

Response Deadline10/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, requires the manufacture or sourcing of 320 vehicular seat supports identified by NSN 2540016706617. The selected supplier will provide these components to prime contractors for delivery to DLA Dist San Joaquin in Tracy, California. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 333241. Strict adherence to technical and security standards is mandatory, including compliance with MIL-STD-129 and the prohibition of Hexavalent Chromium per DFARS 252.223-7008. Additionally, the contractor must meet DFARS 252.204-7012 and CMMC Level 2 requirements to ensure the proper safeguarding of defense information. The response deadline for this solicitation is October 29, 2026.

General Info

Small business subcontract for 320 vehicular seat supports due October 29, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

333241 - Food Product Machinery Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7L4-27-T-0438.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

25--SUPPORT,SEAT,VEHICULAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 18

subcontract

Response DeadlineOct 29

Submission deadline

Response Deadline

10/29/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies vehicular seat supports for prime contractors on Defense Logistics Agency (DLA) supply contracts. Manufactures or sources hardware identified by NSN 2540016706617, ensuring compliance with MIL-STD-129 and prohibition of Hexavalent Chromium per DFARS 252.223-7008. Requires compliance with DFARS 252.204-7012 and CMMC Level 2 for safeguarding defense information. Delivers 320 units to DLA Dist San Joaquin, Tracy, CA.

Similar Contracts

Same NAICS industry code

COFFEE MAKER, AUTOMATIC

Solicitation # SPE3SE-27-T-0063

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

FREEZER, MECHANICAL, FOO

Solicitation # SPE3SE-27-T-0065

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Rate Control Valve BodiesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the manufacture or sourcing of eight Rate Control V valve bodies, identified by NSN 1660006516122. The selected provider must ensure all units are packaged according to ASTM D3951 standards to support prime contractors fulfilling DLA supply contracts. Eligible bidders must maintain an active CAGE code and SAM registration. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for October 26, 2026. The procurement falls under NAICS code 333241.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Sleeve Bearing Sets (NSN 3120011220434)This subcontract involves the manufacture of 34 units of precision sleeve bearing sets, part number 47020, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must strictly adhere to TDP Rev A Gen 1 specifications and Quality Assurance Plan 13873 QAP-B02 Revision B. To ensure quality and precision, the manufacturer is required to utilize precision machining equipment and maintain an inspection system that complies with either SAE AS9003 or ISO 9001 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Interested parties must respond by October 26, 2026, regarding this Department of Defense requirement categorized under NAICS code 333241.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Condensing and Compressor Unit (NSN 4130016435008)This subcontract involves the procurement and delivery of one condensing and compressor unit, identified by NSN 4130016435008, for the USS KIDD DDG 100. The hardware must strictly adhere to the technical specifications associated with the provided national stock number and be delivered in accordance with DLA Packaging Requirements RP001. Managed under the Department of Defense through the Subsistence FSE Supply Chain, the contract falls under NAICS code 333241. The performance of the contract will take place at FPO 09513, with a response deadline set for October 22, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Supply of Commercial Hot Food WellsThis subcontract involves the supply of commercial-grade hot food wells for prime contractors supporting the Department of Defense, specifically the Subsistence FSE Supply Chain. The scope of work requires the delivery of two hot food wells each for CLIN 0002 and 0005 to a designated DLA location in FPO 09595. To be eligible, providers must possess a valid CAGE code and Unique Entity Identifier. Strict adherence to military and industry standards is required for the fulfillment of this contract. Items must be packaged according to ASTM D3951, marked and labeled per MIL-STD-129, and palletized in accordance with RP001 DLA Packaging Requirements. Final delivery must include the completed units along with the necessary invoices and receiving reports.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Supply of Refrigerating Condensing Unit (NSN 4130016421367)This subcontract involves the procurement or manufacture of a refrigerating condensing unit meeting NSN 4130016421367 specifications for the Department of Defense Subsistence FSE Supply Chain. The selected provider must ensure the unit is packaged and palletized according to RP001 and ASTM D3951 standards, with marking and labeling compliant with MIL-STD-129 and 29 CFR 1910.1200. Eligible contractors must maintain an active SAM registration and a valid CAGE code, while adhering to the Buy American Act and the Berry Amendment. The performance of this contract takes place in FPO 09591, with a response deadline set for October 22, 2026.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sleeve Bearings (NSN 3120003452149)This subcontract involves the manufacture or sourcing of 21 sleeve bearings under NSN 3120003452149 for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The contractor must adhere to strict technical specifications, including sampling per MIL-STD-1916 or ASQ H1331, marking per RQ017, and packaging and shipment standards according to MIL-STD-2073-1E and MIL-STD-129. The final products are to be delivered to DLA Distribution San Diego. To be eligible for this engagement, the contractor is required to complete a CMMC Level 2 Self-Assessment. The opportunity is categorized under NAICS code 333241, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Annular Ball Bearing SupplierThis subcontract through the Department of Defense DLA Weapons Support ASC Commodities Division requires the supply of 48 Annular Ball Bearings for prime contractors. The selected supplier is responsible for manufacturing or sourcing the bearings as Configuration Control Items, ensuring they are cleaned to NASA JSCM 5322 Level 25 standards, and performing all preservation, packaging, and marking in accordance with MIL-DTL-197M. A critical requirement for this contract is the provision of Type II 12 Month Shelf-Life certification for the delivered units. Performance will take place in Tobyhanna, Pennsylvania, under NAICS code 333241. The response deadline for this opportunity is October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Annular Ball Bearing Supplier (NSN 3110004452597)This subcontract involves the supply of 261 annular ball bearings meeting NSN 3110004452597 specifications for the DLA Weapons Support ASC Commodities Division. Because the bearings are designated as Navy Identified Critical Safety Items, the supplier must hold SAE AS9100 or AS9120 certification. The performance of this contract takes place in Cherry Point and requires the delivery of fully inspected units. Compliance requirements include adherence to DFARS 252.204-7012 and DFARS 252.225-7001 regulations. Additionally, the supplier is responsible for ensuring that all hazardous material containers are labeled in accordance with 29 CFR 1910.1200. The solicitation was posted on October 18, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

REFRIGERATOR, MECHANICA

Solicitation # SPE3SE-27-T-0060

Solicitation SPE3SE-27-T-0060, issued by the DLA Troop Support Subsistence FSE Supply Chain, is for the procurement of two commercial mechanical food refrigerators under NSN 4110-00-194-1570. The required units must feature a minimum storage capacity of 20 cubic feet and operate on 120 Volts AC, 60 Hz, single phase power. Environmental compliance is mandatory, prohibiting Class 1 ozone-depleting substances and requiring the use of EPA-acceptable refrigerants such as HCFC-22 or R-134A. Delivery is required within 20 days after order, with the destination for both inspection and acceptance located in Draper, Utah. The contract mandates strict adherence to packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. All quotes must be submitted via the DIBBS portal, and the award may be processed automatically. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment processing will be handled electronically through the Wide Area WorkFlow system. Alternate parts and surplus materials are generally not accepted for this acquisition.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

COVER, STEAM TABLE PAN

Solicitation # SPE3SE-27-T-0062

Solicitation SPE3SE-27-T-0062 is a fixed-price procurement issued by the Department of Defense, specifically the Subsistence FSE Supply Chain, for the acquisition of two full-sized steam table pan covers. The items are identified by NSN 7310-00-834-4480 and must comply with technical specifications set forth in Basic CID A-A-50179C Revision C. The required delivery date is October 20, 2026, with a delivery timeframe of five days after order. Delivery is designated as FOB Destination to a facility in Subic Bay, Philippines. The contract mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure no mercury is intentionally added to the hardware. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Evaluation for award includes a price preference for certified HUBZone small businesses and requires a realistic delivery schedule. Compliance with the Buy American Act, Berry Amendment, and various cybersecurity standards, including NIST SP 800-171 and DFARS 252.204-7012, is required.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

GUIDE, CARTRIDGE, SMA

Solicitation # SPE7L4-27-T-0456

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 10 hours ago

DEADLINE

HANDLE, DOOR, VEHICULAR

Solicitation # SPE7L4-27-T-0455

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 10 hours ago

DEADLINE

SEAL, NONMETALLIC SPECI

Solicitation # SPE7L4-27-T-0453

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

STRAINER ELEMENT, SE

Solicitation # SPE7L4-27-T-0454

Iron and Steel Forging

POSTED

about 10 hours ago

DEADLINE

First Article Testing (FAT) and Quality ComplianceThis subcontract, titled First Article Testing (FAT) and Quality Compliance, involves providing technical testing and reporting services for prime contractors under DLA supply contracts. The scope of work requires the testing of five initial Objective Flip Cover units to ensure full compliance with DLA Master List specifications and source-controlled drawings. These evaluations must be conducted using specialized testing equipment to verify quality and technical standards. The primary deliverable is a formal First Article Test report, which must be generated and submitted within 90 days of the contract award. This project is managed under the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacturing of Objective Flip Covers (NSN 1005016926359)This subcontract involves the fabrication of 17 Objective Flip Covers for prime contractors under a Department of Defense contract managed by the DLA Weapons Support LSO Combat Vehicles and Armament. The manufacturer must adhere to source-controlled drawings and DLA Master List requirements, which include conducting a Contractor First Article Test on five units and submitting a corresponding report. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The project requires strict adherence to NIST SP 800-171 cybersecurity compliance and mandates inspection by the DCMA QAR. Performance will take place in New Cumberland, Pennsylvania. The final deliverables consist of the 17 completed units and the required First Article Test documentation.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Supply of Heater Control Valves (NSN 2540-01-670-4332)This subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, requires the supply of 479 heater control valves, identified by NSN 2540-01-670-4332. The contract is designated as a Total Small Business Set-Aside under NAICS code 332410. All units are to be delivered to DLA Dist San Joaquin in Tracy, California. The contractor must adhere to strict packaging and safety standards, utilizing ASTM D3951 or TQ IP025 for hazardous materials and ensuring all packaging is marked according to MIL-STD-129 and palletized per RP001. Additionally, the provider must maintain compliance with 29 CFR 1910.1200 regarding hazardous communication. The response deadline for this solicitation is October 29, 2026.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract opportunity, titled Military-Grade Packaging and Labeling Services, is issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The project requires the provision of specialized packaging and marking for military hardware intended for prime contractors fulfilling DLA supply contracts. All work must be performed using industrial materials and systems to ensure shipments are ready for DLA acceptance. Technical requirements mandate that components be packaged according to ASTM D3951 and that all markings and labels strictly adhere to MIL-STD-129. This is a total small business set-aside under NAICS code 339999. The solicitation was posted on October 18, 2026, with a response deadline of November 2, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manufacturing of Gun Stabilizer AssembliesThis subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, involves the manufacture and supply of Gun Stabilizer Assemblies (NSN: 1005009441965). The selected provider will utilize precision machining to fabricate these assemblies to strict military-grade tolerances for prime contractors. Key compliance requirements include adherence to MIL-STD-129 for marking, ASTM D3951 for packaging, and DFARS 252.204-7010 regarding Covered Defense Telecommunications Equipment. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332994. Interested parties must submit their responses by November 2, 2026. The scope of work concludes with the delivery of completed and properly labeled stabilizer assemblies to meet DLA supply contract specifications.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Supply of Vehicular Seat Frame Sections (NSN 2540016980876)This subcontract involves the manufacture or sourcing of five vehicular seat frame sections under NSN 2540-01-698-0876 for the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The components must be produced using automotive-grade steel or alloys and delivered to Tracy, California. To be eligible, contractors must provide a CAGE code and UEI, and ensure full compliance with the Buy American Act. The contract mandates strict adherence to military standards for logistics and handling, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. Interested parties must submit their responses by October 29, 2026, to fulfill the requirement for five fully marked and packaged seat frame units.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Manufacturing and Supply of Vehicular Seat Supports (Rear Seat, Left Hand)This subcontract involves the manufacturing and supply of 139 rear seat left hand vehicular seat support top assemblies for the Department of Defense, specifically supporting DLA Weapons Support. The production must strictly adhere to Basic Drawing 19207 12339047, Rev C, and all units must be palletized according to RP001 standards. The contractor is required to ensure full compliance with DFARS 252.225-7001 Buy American standards before delivering the completed assemblies to the government. Performance for this contract is based in Texarkana, Texas, under NAICS code 333242.

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Supply of Packing Retainers (NSN 5330012715191)This subcontract involves the manufacture or sourcing of Packing Retainers identified by NSN 5330012715191 for prime contractors supporting the Defense Logistics Agency Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for delivering physical components that strictly adhere to DFARS and DLA Master Solicitation Technical Requirements, with a specific mandate that all supplied items remain free of asbestos and Class I ozone depleting chemicals. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332721. Interested parties must submit their responses by November 2, 2026, to fulfill delivery orders as requested by the Department of Defense.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS