This Combined Synopsis/Solicitation opportunity was posted on May 19, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Vertical Lift Module

Closed

F2DCCE4108A03Federal

Submission Closed05/27/2014, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 337215

New

International

Hendon Library: School Libraries and Resources Service (SLRS) refit 2026/27

Solicitation # 1074244299

The London Borough of Barnet is seeking a contractor for the refit of the School Libraries and Resource Service (SLRS) located within the staff-only area of Hendon Library. The project aims to replace outdated, mismatched shelving that currently obstructs light and is poorly optimized for the space, which has led to the encroachment of SLRS collections into shared office and archive storage areas. The refit must support a high-volume operation that manages over 9,000 crates, boxes, and items annually for education establishments. The scope of work falls under library equipment and library construction, with a particular suitability for small and medium-sized enterprises. This open competition procurement, identified by solicitation number 1074244299, has an estimated total value of 60,000 GBP excluding VAT. The performance period is estimated to run from November 23, 2026, to December 31, 2026. Interested parties must submit their responses via the designated eSourcing portal by the deadline of November 16, 2026, at 10:10am. The primary point of contact for this opportunity is Justin Fenton within the London Borough of Barnet procurement office.

London Borough of Barnet

POSTED

DEADLINE

Supply and Installation of Industrial Pallet Racking, Mezzanine System, and Warehouse Partition

Solicitation # rf_x_20569

The St. Lawrence Parks Commission, under the Government of Ontario, is soliciting bids for the supply, engineering, delivery, and installation of an integrated collections-storage system for Upper Canada Village in Morrisburg, Ontario. The project involves equipping a newly constructed 75 ft by 110 ft unheated steel storage building with industrial pallet racking, a freestanding mezzanine of approximately 1,296 square feet, and a security partition measuring 75 ft wide by 16 ft high featuring a lockable sliding gate. Because the facility will house a diverse museum collection including agricultural machinery, horse-drawn vehicles, and various artifacts, the system must be engineered to accommodate varied sizes and weights while ensuring adequate circulation for large historic equipment. The successful vendor will be responsible for all structural components, anchoring, shop drawings, load information, and necessary engineering documentation. This solicitation, identified as RFB 26-12 or rf_x_20569, utilizes a multi-envelope submission process requiring both a qualification envelope and a commercial envelope, with the award based on the best price. The deadline for responses is November 24, 2026, and the St. Lawrence Parks Commission reserves the right to award all or only a portion of the work based on available budget.

St. Lawrence Parks Commission

POSTED

DEADLINE

Council House Museum: exhibit cases in the first g

Solicitation # 27805

The Chickasaw Nation is seeking a contractor to design and install custom exhibit cases at the Chickasaw Council House Museum. The selected provider will collaborate with stakeholders to finalize specifications for displays that are eight feet tall, featuring glass panels and integrated cabinet storage at the base. The project scope involves approximately 85 linear feet of installations distributed across the west, north, and east walls. This solicitation, numbered 27805, was posted on October 16, 2026, with a response deadline of October 21, 2026. Interested parties should coordinate with the designated point of contact to ensure designs meet the specific requirements of the tribal organization.

POSTED

DEADLINE

RFP-PELL-270000000037-3 | Locker Replacement RFP

Solicitation # RFP-PELL-270000000037-3

Pellston Public Schools in Michigan is soliciting bids for the 2026 Locker Replacement Project, identified as RFP-PELL-270000000037-3. The scope of work involves the supply and installation of lockers at the Pellston Schools location. Bidders must provide a base bid for 413 lockers, though a subsequent walkthrough indicated a potential total of 416 units; therefore, contractors must provide pricing for any additional lockers beyond the base amount. The project requires the integration of ADA accessible lockers throughout the layout in compliance with state building accessibility requirements, and the final layout must be reviewed and approved by a district representative. Lockers Manufacturing is listed as an approved vendor. As part of the proposal, bidders must provide pricing for new base trim as an alternate item. All submissions must be delivered to the Office of the Superintendent by the deadline of October 20, 2026, at 2:30 PM. Requests for information were required to be submitted by October 16, 2026. The primary point of contact for this solicitation is Jared Anderson.

Pellston Public Schools

POSTED

DEADLINE

Solicitation # TAMU-RFP-27-5130

Texas A&M University is soliciting proposals under solicitation number TAMU-RFP-27-5130 for a Full Control Locker Integration and Enterprise System. This SLED opportunity was posted on October 15, 2026, with a response deadline of November 6, 2026, at 2:00 p.m. CST. The project will be performed in the state of Texas. Interested bidders must register and submit their responses electronically through the AggieBid portal. The primary point of contact for this procurement is Wes Wolfe. While the overall scope focuses on the locker integration and enterprise system, specific pricing, delivery schedules, and detailed evaluation factors are not provided in the initial notification.

POSTED

DEADLINE

Full Control Locker Integration and Enterprise System

Solicitation # TAMU-RFP-27-5130

Texas A&M University Mail Services is soliciting proposals under solicitation number TAMU-RFP-27-5130 to engage a qualified vendor for the conversion of three locker systems and the implementation of a configurable package tracking locker software system at the College Station, Texas campus. The scope of work includes the delivery and conversion of 11 package management locker systems and the provision of associated software usage fees or rental services. The contract will be awarded based on Best Value criteria, with the response deadline set for November 6, 2026, at 2:00 PM CST. Applicants must submit a comprehensive proposal package including a technical proposal, pricing proposal, references, a signed execution of offer, a non-collusion affidavit, and a sample insurance certificate. The university also requests certification status regarding Texas VetHUB and CMBL registration. Payment terms are established as 100% Net 30, payable upon the latest of the receipt of goods, invoice submission, completion of installation, or final acceptance. Primary contact for this procurement is Stephen Wolfe.

POSTED

DEADLINE

FM363 Chester Fritz Library Popular Reading Bookshelves

Solicitation # FM363-2027

Solicitation FM363-2027 is issued by the University of North Dakota Procurement Office for the acquisition of furniture and related services, specifically for the Chester Fritz Library Popular Reading bookshelves. The procurement is managed by Procurement Officer Jason Gallagher, with the official notice posted on October 15, 2026. The place of performance is located within the state of North Dakota. Interested bidders must submit their responses electronically through the UND Jaggaer supplier portal by the deadline of October 23, 2026, at 5:00 PM. Returning users may use existing credentials, while new users must contact the procurement officer for login instructions. Detailed specifications, scope of work, and pricing requirements are hosted on the UND sourcing portal rather than in the initial notice.

POSTED

DEADLINE

IWQ137959 Purchase of a Clock Exhibit Case for the Gwinnett Historic Courthouse

Solicitation # IWQ 137959

Gwinnett County Government is soliciting quotes for the purchase and delivery of one freestanding, archival-quality exhibit case to display clock movement and motion works at the Gwinnett Historic Courthouse in Lawrenceville, Georgia. The case must feature a UV-filtering acrylic vitrine with an airtight seal, a flat archival-quality linen board deck, and a natural wood veneer exterior base with a color approved by the County. All interior materials must be acid-free, inert, and non-off-gassing. The minimum interior vitrine dimensions are 64 inches high, 55 inches wide, and 32 inches deep. The vendor is responsible for delivery and placement of the case in a pre-designated space, with delivery coordinated through the Department of Community Services. The award will be granted to the lowest responsive and responsible vendor, with evaluation factors including quality, conformity to specifications, suitability, and delivery terms. Required submission documents include a lump sum quote schedule, a certification of non-collusion, and at least three references for similar work. Depending on the contract value and provider status, a contractor affidavit, ethics affidavit, or specific bonds may be required. Payment will be processed electronically via ePayables or direct deposit following the verification of delivery. A mock-up must be approved by the County before the award is finalized or production begins.

Gwinnett County Government

POSTED

DEADLINE

Medical Storage and Shelving SupplierThis subcontract opportunity is for a Medical Storage and Shelving Supplier to support prime contractors on Navy Navfacsyscom Southeast facility projects located in Crestview. The scope of work involves the supply and installation of heavy-duty vertical shelving and storage systems specifically designed for medical records and supplies. All provided equipment, including medical supply cabinets, must be industrial-grade and meet established commercial safety ratings. The project falls under NAICS code 337215 and is managed under the Department of Defense. Interested parties should note that the solicitation was posted on October 15, 2026, with a response deadline set for November 16, 2026. The primary objective is the delivery of fully installed vertical storage solutions that meet the rigorous demands of military medical facilities.

Navfacsyscom Southeast

POSTED

DEADLINE

TTSH_RFP_R689068_To supply, deliver and installation of boltless racking with dividers and heavy duty racking

Solicitation # Doc2439814085

Tan Tock Seng Hospital, through contracting agent ALPS Pte Ltd, is seeking proposals for the supply, delivery, and installation of heavy duty racking and boltless racking with dividers. The submission deadline for this request for proposal is November 5, 2026, at 3pm Singapore Time. All proposals must be submitted formally through Ariba Sourcing to avoid potential disqualification. Participation is contingent upon attending a compulsory briefing and site showround on October 22, 2026, at 3pm at the TTSH MMD Meeting Room 1. Interested vendors must register with Ms. Wendelin Koh by October 20, 2026, at 5pm, providing their company name and attendee details. All official clarifications should be directed to the buyer's business email to ensure a timely response before the closing date.

POSTED

DEADLINE

RACK, STORAGE, SMALL ARM

Solicitation # SPE7L7-27-T-0258

Solicitation SPE7L7-27-T-0258 is a request for quotations from the Department of Defense, specifically DLA Weapons Support, for the procurement of eight small arms storage racks under NSN 1095015505431. The requirement is categorized under NAICS code 337215. The government may make multiple awards, with the best value offeror receiving at least 60 percent of the total requirement. Delivery is set for 218 days after the award, with a need ship date of June 2, 2027, and a final required delivery date of October 31, 2027. The items are to be delivered FOB Origin to DLA Distribution Red River in Texarkana, Texas. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and requires packaging in accordance with ASTM D3951 and MIL-STD-129, with palletization following RP001. Special requirements include compliance with RD001 for the demilitarization of small arms weapons and parts, and RQ011 for the removal of government identification from non-accepted supplies. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act and DFARS cybersecurity standards. Inspection and acceptance will occur at the destination.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

B-2719LM Lockers Catalog Discount

Solicitation # PE-77021-NONST-2027-000000222

Gwinnett County Public Schools in Georgia is soliciting bid submissions for the B-2719LM Lockers Catalog Discount under solicitation number PE-77021-NONST-2027-000000222. This procurement opportunity, posted on October 14, 2026, seeks to establish a catalog discount for lockers to be used within the school system. Interested parties must submit their bids digitally through the Euna Procurement portal, formerly known as Bonfire, or via the official GCPS Purchasing website. The deadline for all responses is October 28, 2026, at 2:00 PM UTC. The primary point of contact for this solicitation is Lisa Muehlberger.

Gwinnett County Public Schools

POSTED

6 days ago

DEADLINE

in 8 days

General Info

Agency

N/A

NAICS

337215 - Showcase, Partition, Shelving, and Locker Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 19

Combined Synopsis

Response DeadlineMay 27

Deadline has passed

Submission Closed

05/27/2014, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

Contacts2 people available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

Contacts

Douglas M. White

contact@example.gov

+1 (555) 000-0000

Shauna A. H. LyonContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6-STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTATIONS ARE BEING REQUESTED, AND A WRITTEN SOLICITATION DOCUMENT WILL NOT BE ISSUED. THIS SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES. This solicitation is a Request for Quotation (RFQ). Responsible quotes will include pricing for the items below: Shuttle XP Base Model -- quantity 1 each Upgrade to XLD700 Model & 34D Tray Accomodation, Unit 172.44"Wx122.99"D x 147.64"H - quantity 1 each Medium Capacity Tray to include at no additional charge Galvanized Shelf Panels - quantity 1 each Tray Capacity Upgrade to 1323lbs & Medium XXL Universal Tray Type, to include at no additional charge Galvanized Shelf Panels. - quantity 19 each Manual Hinge Table - quantity 1 each Interface Cable - quantity 1 each Or equivelant see attached specs INSPECTION AND ACCEPTANCE CRITERIA Deliverables will be inspected upon arrival EVALUATION CRITERIA AND BASIS FOR AWARD offers will be ranked by price from lowest to highest then beginning with the lowest they will be evaluated to ensure they meet the technical requirements (including ARO). As soon as an offer is found that meets the requirements the evaluation will end no more expensive proposals will be evaluated. Technical requirements means the quoter is the manufacturer or an authorized reseller, and can provide all required services. REQUIRED SUBMISSIONS All quoters shall submit the following: 1) A quotation including all required items (all or nothing) 2) Cage Code, DUNS Number, delivery timeframe after receipt of order, 3) This is a Combined Synopsis/Solicitation for equipment as defined herein. The Government intends to award a Purchase Order as a result of this Combined Synopsis/Solicitation that will include the terms and conditions that are set forth herein. In order to facilitate the award process, ALL quotes shall include a statement regarding the terms and conditions herein as follows: The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR The offeror shall state "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following: Offeror shall list exception(s) and rationale for the exception(s) Please note that this procurement is not being conducted under the GSA Federal Supply Schedule (FSS) program or another Government-Wide Area Contract (GWAC). If an offeror submits a quotation based upon an FSS or GWAC contract, the Government will accept the quoted price. However, the terms and conditions stated herein will be included in any resultant Purchase Order, not the terms and conditions of the offeror's FSS or GWAC contract, and the statement required above shall be included in the quotation. 4) If the quoter is not registered at https://www.sam.gov/portal/public/SAM/, a completed copy of FAR 52.212-3 OFFERORS REPRESENTATIONS AND CERTIFICATIONS-COMMERCIAL ITEMS is required. All quotations shall be sent to: Douglas.white@hill.af.mil All offerors shall ensure the RFQ number is visible on the outermost packaging. PROVISIONS AND CLAUSES The following provisions apply to this acquisition: 52.212-1, Instructions to Offerors - Commercial; 52.212-2, Evaluation-Commercial Items; 52.212-3, Offeror Representations and Certifications - Commercial Items. In accordance with FAR 52.212-3 Offeror Representations and Certifications - Commercial Items, offerors must complete annual representations and certifications on-line at https://www.sam.gov/portal/public/SAM/. If paragraph (j) of the provision applies, a written submission is required; The following clauses apply to this acquisition: 52.212-4 Contract Terms and Conditions-Commercial Items; 52.212-5 (diviation) Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items including subparagraphs; 52.211-17 Delivery of Excess Quantities; 52.252-2 Clauses Incorporated By Reference; 252.211-7003 Item Identification and Valuation; and 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7006 Wide Area WorkFlow Payment Instructions

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS