This Solicitation opportunity from Georgia was posted on July 2, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Vertical Turbine Pump

Closed

PE-75553-NONST-2025-000000041State & Local

Submission Closed07/09/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910

New

Theatre Mold Remediation Scope of Work

Solicitation # AT25-0006

Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project, necessitated by a sprinkler system failure, requires the remediation of mold throughout the entire building and the cleaning or replacement of damaged theater seating cushions. All work must be performed in accordance with ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the Micro Air Inc. Mold Testing report dated April 11, 2024. Key requirements include the provision of a Certified Industrial Hygienist for daily site visits and final clearance, the implementation of a detailed remediation plan featuring HEPA filtration and negative air pressure, and adherence to Indiana state regulations where they exceed federal standards. The contract is a single lump sum award based on best value, with evaluation weights assigned to price (60), quality (20), past performance (10), and schedule (10). Bidders must be small businesses or certified VOSB, SDVOSB, WOSB, or HUBZone entities and must possess a valid Indiana Contractor's License. Proposals must include a detailed cost breakdown, a timeline for substantial completion, and certification of compliance with Davis Bacon Act wage rates. The selected contractor must start work within 14 days of the Notice to Proceed and maintain specific automobile and workers compensation insurance naming Adams and Associates, Inc. as an additional insured. Payment is issued on Net 30 terms, contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens.

Atterbury Job Corps Center

POSTED

DEADLINE

Lead and Asbestos Testing and Removal

City of Fort Lauderdale

POSTED

DEADLINE

Asbestos Removal and AbatementThis subcontract for Asbestos Removal and Abatement involves the physical removal, containment, and disposal of asbestos-containing materials for prime contractors working on University of Bedfordshire facility projects. The selected provider must implement strict containment measures, including the use of negative pressure units and HEPA filtration systems, to prevent fiber release and ensure the safe transport of hazardous waste in accordance with UK regulations. To qualify, the contractor must hold a Licensed Asbestos Removal Contractor certification and maintain full compliance with HSE standards. Key deliverables include the provision of certified asbestos-free areas and the submission of official waste consignment notes. The response deadline for this opportunity is November 27, 2026.

University of Bedfordshire

POSTED

DEADLINE

Provision of Asbestos Management & Compliance Service

Solicitation # UoB/P EST - 00000747

The University of Bedfordshire is soliciting proposals under solicitation number UoB/P EST - 00000747 for the provision of asbestos management and compliance services. This contract, categorized under asbestos removal services, covers multiple performance locations including Bedford, Luton, Buckinghamshire CC, and the broader Bedfordshire and Hertfordshire area. The estimated total value of the contract is 141,666 GBP excluding VAT. The initial period of performance is estimated to run from January 1, 2027, to December 31, 2029, with the possibility of two twelve-month extensions extending the term through December 31, 2031. Interested parties must submit their responses via the in-tend portal by the deadline of November 27, 2026, at 12:00pm. Detailed award criteria and specific deliverables are contained within the tender documents available on the procurement portal.

University of Bedfordshire

POSTED

DEADLINE

Mold Abatement SpecialistThis subcontract opportunity is for a Mold Abatement Specialist to provide removal and remediation services for prime contractors working on Montebello Unified School District facility projects in Montebello, California. The scope of work includes the installation of containment, three-stage decontamination units, and negative air pressure systems. Specific tasks involve removing drywall and ceiling grid tiles, followed by HEPA vacuuming, wet wiping, and kiln painting to the studs to ensure a mold-free environment verified by third-party clearances. The project requires the use of certified mold abatement technicians and strict adherence to CAL/OSHA compliance standards. Interested parties must respond by November 2, 2026. The work falls under NAICS code 562910 and is focused on delivering safe, remediated spaces within the school district's facilities.

Montebello Unified School District

POSTED

DEADLINE

MPE Three Classroom Mold Abatement - Rooms 22, 23, 24

Solicitation # 01 (2026-2027)

The Montebello Unified School District is soliciting bids under RFQ No. 01 (2026-2027) for mold abatement services in three classrooms, specifically Rooms 22, 23, and 24 at MPE in Montebello, California. The scope of work includes the abatement process, cleaning of A/C systems, and the movement of furniture before and after the project. Contractors must utilize containment, three-stage decors, and negative air pressure, while maintaining CAL/OSHA safety standards and good housekeeping. All work will be monitored by a third-party consultant, and the contractor is responsible for any necessary re-cleaning if good clearances are not achieved. Regulated disposal must be accompanied by a manifest, and proper mold signage and yellow caution flagging are required on-site. Bids must be submitted by November 2, 2026, at 9:00 a.m. via the designated secure portal. The contract will be awarded to the best value bidder based on price, proven ability to comply with specifications, capability, and credibility, with a preference for local firms in the event of equal low bids. Requirements for submission include a Non-Collusion Affidavit and a Certificate of Workers' Compensation Insurance. The successful vendor must provide a minimum one-year warranty and maintain comprehensive insurance naming the District as an additional insured. Payment is due 30 days after the receipt of a correct invoice or acceptance of goods. The District reserves the right to terminate the agreement with 30 days' written notice or immediately upon failure to perform.

Montebello Unified School District

POSTED

DEADLINE

UST Removal and Environmental RemediationThis subcontract for UST Removal and Environmental Remediation involves the removal of underground storage tanks at the US Army Watervliet Arsenal facility. The selected contractor will be responsible for pumping out water and oil, executing tank extraction, and performing comprehensive post-removal site cleaning and inspection using specialized pumping and excavation equipment. Key deliverables include the removed tanks, a detailed site inspection report, and all necessary disposal documentation. The project requires strict adherence to safety and regulatory protocols, including the development of a UST Work Plan and the procurement of Confined Space entry permits. This opportunity is designated as a Total Small Business Set Aside under NAICS code 562910. Interested parties must submit their responses by November 12, 2026, for this Department of Defense project located in zip code 12189.

POSTED

DEADLINE

Hazmat Emergency Response ServicesThis subcontract for Hazmat Emergency Response Services supports prime contractors on Department of Veterans Affairs healthcare facility projects in Los Angeles. The scope of work involves providing rapid-response personnel and specialized equipment, including vacuum trucks, spill kits, and personal protective equipment, to contain and remediate unplanned hazardous material releases. The selected provider is responsible for performing comprehensive cleanups of contaminated areas and delivering detailed spill remediation and incident reports. All field personnel assigned to this contract must hold HAZWOPER certification to ensure safety and regulatory compliance. The opportunity is categorized under NAICS code 562910 and is managed through the Department of Veterans Affairs Network Contract Office 22. Interested parties should note the response deadline of November 7, 2026.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

HTRW Excavation, Transportation, and DisposalThis subcontract opportunity, titled HTRW Excavation, Transportation, and Disposal, supports prime contractors on USACE St. Louis District remediation projects under the Department of Defense. The scope of work involves the excavation of hazardous, toxic, or low-level radiological waste, as well as the loading and legal transport of these materials using heavy equipment and DOT-approved vehicles. The selected contractor is responsible for managing HTRW manifesting in accordance with DOT regulations and providing all necessary disposal certificates and waste manifests upon delivery. This is a total Small Business Set Aside opportunity categorized under NAICS code 562910. Interested parties must submit their responses by November 12, 2026, at 4:00 PM. The project focuses on the safe removal and delivery of contaminated materials to approved disposal sites to ensure environmental compliance and site remediation.

POSTED

DEADLINE

Emergency Water Mitigation and Stabilization ServicesThis subcontract for Emergency Water Mitigation and Stabilization Services supports prime contractors on Department of Veterans Affairs facility projects in Dallas, Texas. The scope of work involves rapid response to stop active water sources, initiating drying processes according to EPA guidance, and maintaining containment using negative pressure, air machines, and moisture monitoring tools. All services must comply with ANSI/IICRC S520-2024 and OSHA 1910.134 standards, culminating in a stabilized environment and a detailed 24-hour stabilization report. The opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 562910 and is managed by the Department of Veterans Affairs Network Contract Office 17. Interested parties must submit their responses by November 18, 2026.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Hazardous Materials (HAZMAT) MitigationThis subcontract opportunity with the USDA Forest Service involves providing comprehensive hazardous materials mitigation services for prime contractors. The scope of work focuses on the identification, removal, and legal disposal of asbestos-containing materials, lead-based paint, and biohazards such as animal feces. All hazardous waste must be transported and disposed of through approved legal channels off-forest to ensure a completely HAZMAT-free site, with the final delivery requiring all necessary disposal manifests. The project is located in Nevada City and is designated as a total Small Business Set Aside under NAICS code 562910. Qualified bidders must provide certified asbestos and lead abatement specialists to perform the work. The solicitation was posted on October 28, 2026, with a response deadline of November 28, 2026.

POSTED

DEADLINE

Hazardous and Shelf-Life Material Management

Navsup Flt Logistics Ctr Norfolk

POSTED

about 9 hours ago

DEADLINE

in 8 days

AI Contract Overview

The contract involves the procurement of a vertical turbine pump designed as a direct replacement for the Sulzer Model JT-33CLC-1, featuring a comprehensive assembly that includes a cast iron bowl with Ni-Al bronze wear rings, a cast iron suction bell, and a sand collar made of 316 stainless steel. The pump's bowl shaft is constructed from 316 stainless steel, and the impeller is made of aluminum bronze, with associated wear rings and keys of compatible materials. The discharge head assembly is fabricated from steel with a 24.5-inch diameter discharge flange, incorporating multiple tapped connections for air release, sensing lines, and pressure gauges, which are to be supplied separately. The motor stand, stuffing box, coupling, and other components are specified with corrosion-resistant materials such as cast iron, aluminum, and stainless steel, all coated with NSF-61 approved coatings for ferrous surfaces to ensure durability and compliance. The column assembly extends approximately 22 feet 11 inches, utilizing flanged steel with bronze or 316 stainless steel retainers, and includes rubber cutlass bearings spaced at a maximum of 10 feet, along with a 316 stainless steel line shaft supported by shaft sleeves. The entire assembly emphasizes corrosion resistance and structural integrity, with bolting and coatings specified to meet NSF-61 standards. The contract, issued by Dalton Utilities in Georgia, is valued between $500,000 and $1,000,000, with a response deadline of July 9, 2025. The primary point of contact is Neil Ridley, reachable via email or phone, and the solicitation details are accessible through the provided online portal.

General Info

Agency

Georgia → Dalton Utilities

NAICS

562910 - Remediation Services

Place of Performance

GA, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedJul 2

Solicitation

Notice updatedJul 2

Solicitation number changed from 75553 DALTON PE-75553-NONST-2025-000000041 to PE-75553-NONST-2025-000000041.

Response DeadlineJul 9

Deadline has passed

Submission Closed

07/09/2025, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGeorgia → Dalton Utilities

Contacts1 person available

OfficeN/A

Organization / AgencyGeorgia → Dalton Utilities

Office AddressN/A

Contacts

Neil Ridley

contact@example.gov

+1 (555) 000-0000

Full Description

Must be a direct replacement for the following pump. Sulzer Model JT-33CLC-1 Stage Vertical Turbine Pump BOWL ASSEMBLY Bowl, Cast Iron Bowl Wear Ring, Ni-Al Bronze Suction Bell, Cast Iron Sand Collar, 316SS Bearings, Bronze [C89835 Federally III] Impeller, Al-Bronze Impeller Key,416SS Impeller Wear Ring, Al-Bronze Bowl Shaft, 316SS Basket Strainer, None Bolting, 316SS Coating (Ferrous Surfaces), NSF-61 Approved Coating DISCHARGE HEAD ASSEMBLY Type JTAF Fabricated Steel with a 24.5 BD x 24 150# Discharge Flange x 46 Diameter base including a 1 NPS tap for an Air Release Valve, 1/4 NPS tap for a Bubbler Sensing Line and a 1/4' NPS tap for a pressure gauge. Bubbler, air release and pressure gauge to be provided by others. Motor Stand, Fabricated Steel Stuffing Box, Cast Iron with Non-asbestos packing Stuffing Box Shaft Sleeve, 304SS or 316SS Coupling, FB-4 - Product Detail Qty Unit Price Extended Price Drive Guard, Aluminum Bolting, 316SS Bearing, Rubber w/316SS Shell Soleplate, Steel 54 SQ x 36 ID x 1.75 THK Coating (Ferrous Surfaces), NSF 61 Approved ID/OD COLUMN ASSEMBLY Approximately 22'-11' of 24 flanged steel column assembly with drop-in Bronze or 316SS retainers. Maximum column and line shaft length is 10 feet. Bearings, Cutlass Rubber with 'a Maximum 10' Spacing Line shaft, 316SS w/ 304SS or 316SS Shaft Sleeves Bolting, 316SS Coating (Ferrous Surfaces), NSF 61 Approved ID/OD