Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

VISCOMETER

Active
N0040626Q0361Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, numbered N0040626Q0361, is a combined synopsis and request for quotation for a viscometer including installation and training, issued under FAR Part 12 as a commercial acquisition. It is exclusively set aside for small business concerns under a total small business set-aside, meaning only small businesses as defined by the SBA are eligible to respond. The solicitation does not require a separate formal document and serves as the complete source of requirements, with all applicable provisions and clauses incorporated by reference and accessible via acquisition.gov. The NAICS code 334513 applies to this procurement, aligning it with the manufacturing of laboratory instrumentation. The offering organization is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, part of the Department of Defense, located in Bremerton, Washington. Responses must be submitted by July 28, 2026, at 4:00 PM Eastern Time, with the solicitation originally posted on July 20, 2026. There is no specified place of performance beyond the agency location, and all deliveries and services are expected to meet the requirements as outlined in the RFQ. The primary point of contact for questions or clarifications is Kristen Lorena, reachable via email at kristen.g.lorena.civ@us.navy.mil. All offers must comply with the commercial item acquisition procedures and small business eligibility requirements, and prospective vendors are directed to the SAM.gov link for detailed submission instructions and to access the full solicitation document.

General Info

Small business set-aside for viscometer with installation and training, due July 28, 2026, Navy procurement.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process VariablesView NAICS

Place of Performance

WA

Set-Aside

SBA

Documents

(1)

2.1.1+26Q0361+SOLICITATION.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5100, USA
Organization / Agency
Department Of Defense → Navsup Flt Logistics Ctr Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5100, USA
Contacts
Kristen Lorena

Full Description

Show more

FAR 12.202(b)(1)(i) “This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued”. 


Solicitation number N0040626q0361 is issued as a request for quotation (RFQ) for a viscometer, including installation and training. 


This acquisition is set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov 

Similar Contracts

Same NAICS industry code

NAICS: 334513
New
DIBBS
INDICATOR, RATE OF FThe contract pertains to the procurement of one unit of an indicator with a rate of flow, identified by part number FT-32AEYS-LEAS4072 and NSN 6680015378621, issued under solicitation SPE4A5-26-T-298N. Delivery is required within 171 days from the contract date, with a required delivery date of November 28, 2026, and a need ship date of January 17, 2027. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and marking strictly following these guidelines. Sampling and verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are defined with verification levels or AQLs as mandated. The product is classified as a Critical Application Item and must have all government identification removed if non-accepted, with bare item marking as required by RQ017. Covered Defense Information applies, and all documentation must align with referenced DLA directives. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
INDICATOR SUBASSEMBThe contract is for the procurement of one Indicator Subassembly, Rate of Flow, identified by NSN 6680-01-503-0858 and part number TMS-0956, supplied by CLARK-RELIANCE LLC. The item is designated as a Critical Application Item with no shelf life requirement and is exempt from Unique Identification per DFARS 252.211-7003(c)(1)(i). Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures mandated to follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited in the item, its packaging, preservation, or marking, except for specific functional uses in batteries, instruments, or reagents as defined by NAVSEA, and any portable mercury-containing devices must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 05 for Delicate Instrument, and palletization must meet DLA packaging requirements. Delivery is FOB origin with a 177-day lead time to the DLA Distribution facility in New Cumberland, PA, to be completed by January 23, 2027, with zero variance allowed in quantity. Inspection and acceptance occur at the destination point. The procurement is governed under a simplified acquisition process and the solicitation number is SPE4A6-26-T-08UJ, issued by the ASC Commodities Division under NAICS code 334513.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
TESTER, PYROMETER ANThe contract pertains to the procurement of nine units of a Tester, Pyrometer AN with NSN 6685-01-627-7310, issued under solicitation SPE4A5-26-T-302H by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 116 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 respectively, with no special marking required, and palletization must adhere to DLA Packaging Requirements. The contract specifies zero tolerance for quantity variance and mandates that all items be identified with the manufacturer’s part number 70-700-CRK-042-02. Quality requirements are governed by DLA’s Master List of Technical and Quality Requirements, incorporating tailored higher-level provisions for both manufacturers and non-manufacturers, including sampling per MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated. Verification levels and AQLs are strictly defined for critical, major, and minor attributes, and manufacturers may choose attribute or variable inspection methods. The unit price is $9.00 per unit, totaling $81.00, and all items must be delivered by the required date of July 20, 2026, with freight and transportation details referenced in DLA procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
GAGE, PRESSURE, DIAL INDThe contract specifies the procurement of 10 units of a dial indicating pressure gauge with part number EA23-3PJP-LWBX and NSN 6685-01-470-5211, supplied by Ashcroft Inc, under solicitation SPE4A5-26-T-300Z. Delivery is required FOB origin within 171 days, with a mandatory ship date of January 17, 2027, and an original required delivery date of January 4, 2027. The quantity must be delivered exactly as specified with no variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including special labeling as a delicate instrument, and palletization must conform to DLA packaging requirements. Packaging materials and methods must exclude any mercury or mercury compounds, in line with prohibitions that extend to preservation, packing, and marking, except for approved functional uses such as in specific instruments or sensors as defined by NAVSEA, and portable items containing mercury must include a secondary containment and be shock-proof. Sampling for quality assurance follows MIL-STD-1916 or a comparable zero-based plan with attribute verification levels of VII, IV, and II for critical, major, and minor characteristics, respectively, and zero non-conformances are required in sampled lots unless otherwise stated. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by the solicitation or award date. Transport logistics and shipping instructions are governed by DLAD procedural notes, and the unit of issue is the each (EA) as per DoD standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
GAGE, PRESSURE, DIAL INDThis contract pertains to the procurement of five dial pressure gauges, identified by NSN 6685-01-642-6717 and commercial part numbers 90-900-1050 and DP07919-5000-200, supplied by Perma-Cal Industries, Inc. and David Perkins Enterprises, Inc. The items are classified as commercial off-the-shelf products with critical application status, and while unique identification is not required, they must comply with all applicable technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Strict restrictions prohibit the intentional addition or direct contact of mercury or mercury compounds with the hardware, except in specified exceptions such as functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; any portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging, preservation, and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with special labeling indicating the item as a delicate instrument, and mercury is explicitly banned from all packaging materials under IP056. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the full shipment must arrive within 171 days of the contract award, targeting a required delivery date of February 28, 2027. The items are to be shipped to the DLA Distribution center in New Cumberland, Pennsylvania, following DLA packaging and transportation directives, including RP001 and DLAD Procurement Notes C19 and C20. The contract is issued under solicitation SPE4A5-26-T-299C with a unit of issue per EA and zero variance permitted in quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
GAGE, DIFFERENTIAL, DThe contract pertains to the procurement of two differential gages, part number 20RCXXX0X20E1AAA01 with NSN 6685016268815, under solicitation SPE4A5-26-T-301B, issued by the Department of Defense through the ASC Supplier Operations OEM Division. Delivery is required FOB origin with a 171-day lead time, targeting a final delivery date of February 1, 2027, and items must be shipped to the designated receiving warehouse in Tracy, California. The items are classified as critical application products and must comply with stringent packaging standards per MIL-STD-2073-1E and labeling requirements per MIL-STD-129, including a special marking code for delicate instruments. Packaging must also adhere to DLA’s overall packaging requirements and prohibit the use of mercury or mercury compounds in preservation, packaging, or marking, with exceptions limited to specific functional applications such as batteries, instruments, or weapon systems approved by NAVSEA, which must include secondary containment. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the contractor must meet source approval documentation standards. The unit of issue is each (EA), with no quantity variance permitted, and inspection and acceptance occur at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
GAGE, DIFFERENTIAL, DThe contract pertains to the procurement of one differential dial indicating gage, identified by NSN 6685-99-993-1819 and part number QA03558, under solicitation SPE4A5-26-T-301A. It mandates strict adherence to all DLA Master List of Technical and Quality Requirements, which override any industry standards such as ASTM D3951, and specifies compliance with MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise stated. Critical attribute verification levels are fixed at VII for critical, IV for major, and II for minor, with unspecified attributes treated as major. The item is designated a critical application component and must be packaged per DLA regulations RP001, marked according to MIL-STD-129, and shipped in compliance with FED-STD-313 for hazardous materials or ASTM D3951 if non-hazardous, with palletization following prescribed DLA standards. Delivery is FOB origin, with inspection and acceptance occurring at destination, within a 171-day window from solicitation issuance, and no quantity variance is permitted. The unit of issue is each (EA), with total price based on a single unit. The delivery destination is the DLA Distribution facility in New Cumberland, PA, with transport governed by DLAD procedural notes C19 and C20. All technical, quality, and packaging directives are binding and must be fully documented, including source approval if required.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
GAGE, PRESSURE, DIAL INDICATINGThe contract pertains to the procurement of a single dial pressure gauge with NSN 6685-01-131-8110 under solicitation SPE4A6-26-R-XB17, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item manufactured by Ashcroft Inc with part number EA24-3PHP-EWB0 and must be delivered in one unit at a firm fixed price with no variance allowed in quantity. Delivery is required 224 days after the award date, with inspection and acceptance occurring at the destination. Packaging must strictly conform to MIL-STD-2073-1E and MIL-PRF-23199 standards, including marking, labeling, and bar coding per MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The contract incorporates all technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling for quality assurance must align with MIL-STD-1916 or ASQ H1331, Table 1, with attributes assigned specific verification levels or AQLs; zero non-conformances are required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in materials, packing, preservation, or marking except for limited authorized uses such as batteries, fluorescent lamps, or specified instruments, which must include secondary containment and shock-proof design. Hazardous materials handling, packaging, and shipping must adhere to IP025 and IP056 provisions, ensuring no mercury is present in any packaging elements. All logistics and transportation directives are governed by DLAD procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334513
New
DIBBS
REGULATOR, PRESSURE, MEDThe contract specifies the procurement of a pressure regulator for medical gas administration, identified by NSN 6680016192620 and part number L280-220, with a quantity of three units to be delivered under solicitation SPE4A5-26-T-302C. All items must comply with DLA packaging requirements, including MIL-STD-2073-1E for preparation and MIL-STD-129 for marking, with no special marking required. The product must be palletized per RP001 standards and shipped FOB origin to the designated delivery point in Tracy, California, with a required delivery date of May 8, 2027, and an original deadline of October 14, 2026. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, and specified verification levels or AQLs for critical, major, and minor attributes. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition type. The unit of issue is each EA, with no variance allowed in quantity. Transportation and shipping details follow DLAD Proc Notes C19 and C20, and the contract enforces strict compliance with DLA’s standardized procedures for packaging, labeling, and delivery. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 334513, and is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Hien-Van Trinh as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
MANIFOLD, DIGITALThe contract pertains to the procurement of 34 units of a digital manifold, identified by NSN 4110-01-628-4506 and part number SMAN360, under solicitation SPE3SE-26-Q-0396. The item is classified as a commercial product with a firm fixed price and no variance allowed in quantity. Delivery is required within 30 days after award at the designated destination, with inspection and acceptance occurring at the same point. Packaging must strictly adhere to MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including specific methods for preservation, wrapping, and intermediate container usage. Marking must comply with MIL-STD-129 without special标识, and palletization must follow DLA guidelines. The shipment destination and freight address are both specified as the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract incorporates extensive regulatory and compliance clauses from FAR and DFARS, emphasizing unique item identification under 252.211-7003. Each unit must be marked with a two-dimensional data matrix containing a concatenation of enterprise identifier, serial number, and other required data elements, in compliance with ISO/IEC 16022 and related standards. All items must be registered in the DoD Item Unique Identification Registry, with full reporting via Wide Area WorkFlow or alternative approved methods. Additional requirements include compliance with Buy American provisions, restrictions on specialty metals, export controls, prohibitions on sourcing from Xinjiang, whistleblower protections, antiterrorism training, and electronic submission of vendor data. The contractor must retain supply chain traceability documentation, ensure all subcontractors comply with these clauses, and prominently display federal fraud hotline posters during performance. The item description references an automated digital manifold with integrated micron gauge and alarm functionality, though technical specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334513
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of a pressure dial indicating gage with part number 302089SD02L25#A and NSN 6685015622914, with a quantity of four units to be delivered FOB origin within 171 days. The item must comply with all technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with applicable standards such as MIL-STD-1916 or ASQ H1331 governing sampling procedures, requiring zero non-conformances unless otherwise stated. Attributes are to be classified with specified verification levels or AQLs, and any unspecified attributes are treated as major. The gage must not contain or come into contact with mercury except for approved exceptions like batteries, fluorescent lights, or specialized instruments, and any mercury-containing portable devices must have shockproof construction and a secondary containment as per NAVSEA 5100-003D. Packaging must adhere to DLA-specific guidelines under RP001, using MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging if non-hazardous, though DLA requirements override ASTM. Hazardous materials must meet Fed-Std-313 and TQ requirement IP025. The unit of issue is each, with no variance allowed in quantity. The product must be palletized per DLA requirements and shipped to the designated DLA Distribution facility in New Cumberland, PA, with delivery required by March 4, 2027. Compliance with CMMC Level 2 self-assessment is mandatory, and the gage must be physically marked as specified under RQ017. The contract also enforces the removal of government identification from non-accepted supplies and applies covered defense information provisions.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

NAICS: 332722
New
Federal
Brand Name OEM "Jered, LLC" - Helicopter Hangar Door Part(s)Fleet Logistics Center Puget Sound is conducting market research to identify qualified small business vendors capable of supplying specialized helicopter hangar door parts, specifically OEM components from Jered, LLC, under NAICS code 332722 with a small business size standard of 600 employees. The request includes twenty-four distinct hardware items such as screws, hinge pins, and bronze washers, each meticulously detailed with specifications including material composition, dimensions, threading, military standards, technical manual references, and part numbers, all intended for maintenance and repair of helicopter hangar door systems. Participation is voluntary and strictly for market intelligence purposes, with no obligation for the government to award a contract or compensate respondents for costs incurred. All submissions must be emailed to Walid Aslan by the July 24, 2026 deadline and must include the respondent’s organization name, physical address, CAGE code, email, website, phone number, and small business classification status. The notice explicitly states this is not a request for quote or competitive solicitation, and no feedback or evaluations will be provided on any submissions. The data gathered will inform future procurement decisions and is part of a total small business set-aside initiative under Federal Acquisition Regulation guidelines. The office is located in Bremerton, WA, and operates under the Department of Defense through the Naval Supply Systems Command.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 337127
New
Federal
Brand Name OEMs (Multiple) Procurement of - "Standard Beds, Box Springs, Mattresses & Headboards" Aboard Naval VesselFleet Logistics Center Puget Sound is conducting market research to identify qualified vendors capable of supplying a comprehensive range of standardized maritime berthing and lavatory systems for the USS Mustin under the SRF-JRMC program. The requirement encompasses 32 distinct items, including standard beds with box springs and headboards, double and single transom berths with subbases and ladders, and multiple configurations of lightweight modular berths for chief petty officers, all adhering to exact military specifications for dimensions, materials, finishes, and component integrations such as EEBD stowage containers, fan units, curtain tracks, and lighting. Additionally, lavatory units for officer staterooms with subbases, some including integrated lighting, are required, with materials specified as aluminum, corrosion-resistant steel, and finishes compliant with SAE-AMS-STD-595 #26586 and MIL-PRF-24712 powder coating standards. The solicitation strictly lists approved original equipment manufacturers, including Tri-Way Industries, Spec-Built Systems, Baker Sheet Metal, and others, and specifies that all offerings must meet or exceed the referenced drawings and technical requirements. Responses are due by July 24, 2026, and must include organization details, CAGE code, size classification under NAICS 337127 with a 500-employee small business threshold, and contact information. This notice is voluntary and non-binding, serving only as market research with no obligation for the government to award a contract or compensate respondents, and no feedback will be provided on submissions.
Institutional Furniture Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details