Top

W911PT27QA019: COOLANT QCUT 216 For Watervliet Arsenal

Active

W911PT27QA019Federal

Response Deadline10/27/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → W6QK Acc Wva

NAICS

324191 - Petroleum Lubricating Oil and Grease Manufacturing

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Documents

Solicitation+-+W911PT27QA019.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedOct 26

Solicitation

Response DeadlineOct 27

Submission deadline

Response Deadline

10/27/2026, 08:00:00 PM UTCin about 3 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → W6QK Acc Wva

Contacts1 person available

OfficeWATERVLIET, NY, 12189-4050, USA

Organization / AgencyDepartment Of Defense → W6QK Acc Wva

Office AddressWATERVLIET, NY, 12189-4050, USA

Contacts

Taneisha Grant

contact@example.gov

Full Description

Qty. 24 EA: 55 GALLON DRUMS COOLANT QCUT 216

Similar Contracts

Same NAICS industry code

NAICS: 324191

New

DIBBS

LUBRICATING COMPOUND, F

Solicitation # SPE4A6-27-T-7005

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1964

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

LUBRICATING OIL, ENGINE

Solicitation # SPE4A6-27-T-6952

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

9150--Turbine Engine Oil

Solicitation # 36C26227Q0069

The Department of Veterans Affairs is issuing a Sources Sought Notice and Request for Information to identify qualified sources for turbine engine oil equivalent to Castrol Aero J5 (Part# 15AF27). This is not a formal solicitation but a planning effort to conduct market research and determine the appropriate acquisition strategy. The requirement consists of five 55-gallon drums of synthetic-base oil that must cover three classes of gas turbine engine lubricating oils, be intended for aircraft engines with a nominal viscosity of 5 centistokes at 100 degrees Celsius, be identified by NATO Code Number 0-156, and maintain full compatibility with MIL-PRF-23699F approved oils. Interested respondents must submit their capabilities statements and business information via email to the designated contract specialist by November 2, 2026. The government is specifically seeking information regarding business size under NAICS 324191, socioeconomic status such as SDVOSB or VOSB, and compliance with the Buy American Act and the Non-Manufacturer Rule. Responses should include the company's SAM.gov Unique Entity ID, lead times, and any existing federal contract vehicles like GSA or NASA SEWP. While general pricing is encouraged for market research purposes, it will not be used for an award, as this notice does not constitute a binding offer.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Solicitation # SPE4A0-27-T-0318

This fixed-price solicitation, issued by the DLA Weapons Support Aviation Supply Chain, is for the procurement of utility grease, identified as a critical application item and a commercial off-the-shelf product. The requirement is for one box containing ten 400-gram cartridges, with an original required delivery date of October 16, 2026. Delivery is set for Tinker AFB, Oklahoma, and must be shipped via the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to quality and safety standards, including destination inspection per FAR 52.246-2 and sampling methods aligned with MIL-STD-1916 or ASQ H1331. Because the material is hazardous, the contractor must comply with IP025 for packaging and shipping, and all unit containers must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Additional requirements include supply chain traceability documentation, FAA airworthiness approval, and marking compliance with MIL-STD-129. Invoicing must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

GREASE, MOLYBDENUM DISU

Solicitation # SPE4A6-27-T-6803

Solicitation SPE4A6-27-T-6803 is a request for quotations for the procurement of 73 cartridges of Molybdenum Disulfide grease, identified by NSN 9150-01-722-6334 and Deere & Company part number TY6333. This commercial off-the-shelf item is subject to a non-extendable shelf life of 24 months. The required delivery date is April 10, 2027, with a delivery window of 158 days after order. Delivery is FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the item is hazardous, the contractor must provide an SDS and OSHA Hazard Warning/Product Label for approval by technical personnel prior to award, and all packaging must comply with the Hazard Communication Standard. Quality assurance will be conducted at the destination using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. This is not a small business set-aside, and all quotes must be submitted via the DLA Internet Bid Board System. Invoicing and receiving must be processed through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4AN-27-T-0003

Solicitation SPE4AN-27-T-0003 is a request for quotations from the DLA Weapons Support NAS Norfolk Detachment for the procurement of aircraft grease, identified as a Commercial Off The Shelf item under NSN 9150017338256. The requirement consists of 10 cartridges, each containing 13.5 grams. Delivery is required within five days of award, with a required delivery date of October 22, 2026. The shipment is destined for the USS Carl Vinson CVN 70, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to hazardous materials protocols, requiring the submission and approval of Safety Data Sheets and OSHA hazard warning labels by technical personnel prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT NAS NORFOLK DETACHMENT

POSTED

DEADLINE

Synthetic Transmission Fluid

Solicitation # 131-2026

The Southwest Ohio Regional Transit Authority (SORTA), operating as Cincinnati Metro, is soliciting bids for a one-year, firm-fixed price contract for the supply of approximately 4,400 gallons of full synthetic transmission fluid. The fluid must strictly adhere to Allison TES 668 and Voith technical specifications and approval numbers. Bids must be submitted electronically by November 3, 2026, and will be awarded to the responsible bidder offering the lowest price. Evaluation factors include the bidder's character, integrity, financial resources, past performance record, and compliance with legal and regulatory requirements, including non-debarment and affirmative action standards. The selected contractor will be required to deliver the fluid, preferably in bulk, to the Queensgate and Bond Hill garages within 48 hours of a telephone order, during standard business hours. All supplied fluid is subject to analysis by a SORTA-designated laboratory, and any product failing to meet standards must be replaced at no cost or may result in contract cancellation. Payment terms are NET 30 upon completion and acceptance of work. The contract incorporates general terms and conditions regarding insurance, confidentiality, and compliance with the Americans with Disabilities Act and the Ohio Public Records Act, with additional non-negotiable federal clauses applicable if federal funding is utilized.

POSTED

DEADLINE

Two (2) Year Contract - Multipurpose Grease

Solicitation # 209

The Jefferson Parish Government is soliciting bids for a two-year, requirements-based contract to provide multipurpose grease for the Jefferson Parish Engineering Department. The contract is structured on an as-needed basis with no guaranteed minimum quantities. The required product is Supertac Food Grade Grease H1, an extreme pressure, anti-wear, high-temperature lubricant that must comply with USDA H1 quality standards and FDA regulations 21CFR 178.3570, 178.3620(b), and 573.680. Technical specifications include strict requirements for worked penetration, dropping point, four ball wear, and viscosity for both NLGI Grade 1 and Grade 2. The contract will be awarded to the lowest responsive and responsible bidder. To be considered responsive, bidders must acknowledge all addenda on the bid form and accept the as-needed terms of the agreement. The apparent low bidder is required to submit final insurance certificates meeting the parish's standard requirements for Worker's Compensation, Commercial General Liability, and Business Automobile Liability within ten calendar days of the bid opening. Bids are due by October 28, 2026, and must be submitted to the Jefferson Parish Department of Purchasing in Gretna, Louisiana.

Jefferson Parish Government

POSTED

DEADLINE

Vehicle Recompete: BPA FOR BULK OIL AND LUBRICANTS IN MICHIGAN — BPA W912JB24Q0114This Blanket Purchase Agreement, managed by the Department of the Army, provides for the procurement of bulk oil and lubricants to support ground equipment maintenance and operations for the Michigan Army National Guard. The vehicle, identified as W912JB24Q0114, has an ordering period that extends through March 5, 2028. Currently, Lyden Oil Co is the sole incumbent, holding all activity under this agreement. The contract consists of two awards, W912JB24A0013 and W912JB24A0014, with 11 active task orders totaling 105,819.85 dollars. Key deliverables include the resupply of petroleum, oil, and lubricants at various locations, including the CSMS in Lansing, Michigan. Specific materials provided under these orders include 15W40 engine oil, Dexron VI automatic transmission fluid, concentrated antifreeze, and various hydraulic fluids. There is a medium confidence level that this contract will be subject to a recompete.

Department of the Army

POSTED

DEADLINE

MARINE GREASE — 9150016517256 — N0010426QFD66

Solicitation # N00104-26-Q-FD66

Solicitation N00104-26-Q-FD66, issued by NAVSUP Weapon Systems Support, is a request for quotations for Marine Grease (NIIN 016517256), specifically Part Number A2283-93 LVP from TRI/Applied Technologies, Inc. Due to its use in crucial shipboard systems, the material is designated as Special Emphasis material (Level I, Scope of Certification, or Quality Assured), requiring strict adherence to toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The material must be mercury-free, physically identified according to MIL-STD-130, and marked with an expiration date. Although the solicitation was issued on April 29, 2026, with a quote deadline of May 14, 2026, a subsequent amendment dated August 27, 2026, officially canceled the solicitation. The procurement process emphasizes past performance as the primary evaluation factor, weighted more heavily than price. Technical requirements include strict configuration control, with any waivers or engineering change proposals requiring approval from the Contracting Officer. Packaging must comply with MIL-STD-2073 and ASTM D3951-18 depending on the shipment destination. Administrative requirements specify the use of the Wide Area Workflow (WAWF) system for invoicing and certification data submission to the Portsmouth Naval Shipyard. Delivery is set as FOB Destination with a final delivery window of 200 days, and constructive acceptance is extended to 45 days after delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Lubricating Oil, Engine (NSN: 9150014961943)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, requires the supply and delivery of one 55-gallon drum of military-grade engine lubricating oil. The product must strictly conform to National Stock Number 9150014961943 and is categorized under NAICS code 324191. The materials are to be delivered to Whiteman Air Force Base in Missouri by the deadline of August 24, 2026. This procurement is managed through the DLA's awarding system to ensure the availability of critical engine lubricants for military operations.

Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A

View Details

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

NAICS: 238990

New

Federal

Watervliet Arsenal (WVA) Perimeter Fence Extension

Solicitation # W911PT27QA005

Solicitation W911PT27QA005 is a total small business set-aside for the perimeter fence extension at the Watervliet Arsenal in Watervliet, New York. The project requires the contractor to provide all construction management, labor, materials, and equipment to complete work at two primary locations. At the Gillespie Gate east side fence line, the contractor will install approximately 327 lineal feet of 7-foot tall, 9-gauge aluminized chain link fencing with three strands of aluminized barbwire. At the West Campus northeast corner behind building 153, the contractor will extend approximately 90 lineal feet of existing chain link fence from 11 feet to 15 feet in height. Technical specifications require fence posts to be mechanically driven to a 4-foot depth and include a continuous top rail, bottom rail, and top braces with diagonal trusses at all terminal posts. The period of performance is 30 calendar days from the receipt of the Notice to Proceed. Award will be based on the lowest evaluated offer or best value, provided the offeror meets all material requirements and responsibility criteria under FAR 9.104. The contract is subject to the Davis-Bacon Act, with prevailing wage rates specified in Wage Determination NY20260002. Contractors must comply with strict security standards, including Army Directive 2014-05/AR 190-13 for facility access and OSHA requirements for those working over 1,000 hours per quarter. All proposals must be submitted electronically via the PIEE Solicitation module, with the final response deadline extended to October 29, 2026. Invoicing and payment will be processed through the Wide Area WorkFlow system.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Watervliet Arsenal (WVA) Replacement of the 300 Line Chrome Piping

Solicitation # W911PT27QA010

The Watervliet Arsenal (WVA) is soliciting quotes for the third phase of the 300 Line Chrome Piping replacement project. The scope of work requires the contractor to provide all labor, materials, and equipment to replace existing Kynar red piping and PVDF ancillary equipment with Teflon lined steel pipe, fittings, and valves. Technical specifications mandate the use of seamless Schedule 40 carbon steel and specific ASTM standards for flanges, instrument Ts, and floating ball hand valves. All work must be installed to ensure periodic inspection and maintenance components are readily accessible, with horizontal pipe supports spaced according to MSS SP-58. This solicitation is a total small business set-aside specifically for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB) under NAICS code 238220. The period of performance is from November 1, 2026, to February 28, 2027, with a required completion timeline of 90 calendar days following the Notice to Proceed. Proposals must be submitted electronically via the PIEE Solicitation module by October 29, 2026. Award will be based on the lowest evaluated offer or best value, provided the offeror meets all material requirements and responsibility criteria under FAR 9.104. Contractors must adhere to strict security and safety protocols, including signing a non-disclosure agreement regarding arsenal technology and providing REAL ID-compliant identification for base access. The project is subject to Department of Labor Wage Determination No. 2015-4143 Rev 36 for New York. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. All packaging and marking must comply with ASTM D3892 and MSS SP-25 standards.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Defense Freight Transportation (FOB Destination)This subcontract for Defense Freight Transportation involves the transportation and delivery of 61 finished artillery components to the Watervliet Arsenal in New York. The contractor is responsible for hauling these units to DoDAAC W16H1F, ensuring that all shipments are strictly labeled according to MIL-STD-129 standards. Key administrative requirements include the management of all delivery documentation, specifically the Bill of Lading and NSN 1015013444114. The project falls under NAICS code 484220 and is managed by the Department of Defense agency W6QK Acc Wva, with a response deadline set for November 2, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

AISI Grade Wrought Steel SupplyThis subcontract involves the supply of certified wrought steel bars or billets to prime contractors supporting Department of Defense projects at the Watervliet Arsenal. The scope requires the provision of AISI grade wrought steels, specifically excluding merchant quality, leaded, resulfurized, or rephosphorized materials. To ensure quality and regulatory adherence, the supplier must provide Mill Test Reports verifying both AISI grade and UNS compliance for all delivered materials. Managed under NAICS code 331110 and associated with agency W6QK Acc Wva, the contract focuses on the delivery of certified materials to the prime manufacturer. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026. Performance of the contract is centered in the 12189 zip code area.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Extractor Cartridge ManufacturingThis subcontract involves the manufacture of 61 Right Artillery Extractor Cartridges for prime contractors supporting Department of Defense projects at the Watervliet Arsenal. The production requires precision machining using CNC centers and AISI grade wrought steels in strict accordance with Drawing 12591498. To ensure quality and compliance, the manufacturer must adhere to MIL-C-13931 and implement IUID per MIL-STD-130, while specifically avoiding the use of castings and leaded steels. The final delivery of 61 finished cartridges is required FOB Destination to Watervliet, New York. This project falls under NAICS code 332710 and is managed through the W6QK Acc Wva agency. Interested parties should note the response deadline of November 2, 2026.

POSTED

DEADLINE

EXTRACTOR CARTRIDGE PER DRAWING FOR THE WATERVLIET ARSENAL

Solicitation # W911PT27QA012

Solicitation W911PT27QA012 is a firm fixed price contract issued by the Department of Defense for the procurement of 61 extractor cartridges for the Watervliet Arsenal. The items must be manufactured in strict accordance with Drawing 12591498 and National Stock Number 101501344114. Material requirements specify the use of standard AISI grade wrought steels, explicitly prohibiting the use of castings or merchant quality, leaded, resulfurized, and rephosphorized steels. All deliverables must be delivered FOB Destination to Watervliet, New York, on or before June 1, 2027. The government will make a single award to the responsible offeror providing the lowest evaluated price that meets all material and technical specifications. Proposals must be submitted electronically for the total quantity of 61 units to be considered responsive. Evaluation may include a 1,200 dollar addition to the total price for first article testing if the requirement is not waived. Contractors are required to implement a machine-readable Item Unique Identification system per MIL-STD-130 and label shipments according to MIL-STD-129. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Electroless Nickel and Phosphate Plating for M20 LeversThis small business set-aside subcontract involves providing specialized chemical plating services for prime contractors supporting US Army Watervliet Arsenal projects. The scope of work requires the application of Electroless Nickel plating according to SAE AMS2404, Class 2, Grade C, PTFE Impregnation, as well as phosphate coating per drawing 11582539, Rev D. The contractor is responsible for delivering 40 plated M20 Levers, ensuring that plated hole diameters are precisely maintained between .7498 and .7528, with all measurement records provided upon delivery. To be eligible for this Department of Defense project, applicants must possess a valid CAGE code and DD Form 2345. The performance of the contract will take place in zip code 12189. Interested parties must respond by October 28, 2026, to fulfill the requirements of this specialized plating engagement.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Ion Nitriding of M20 LeversThis subcontract involves providing specialized plasma and ion nitriding services for M20 Levers to support prime contractors on projects for the ACC Watervliet Arsenal. The work must be performed in accordance with Drawing 11582539 and SAE AMS2759/8 standards. Key technical requirements include verifying specific surface hardness levels of at least 88 HRI5N/84 HRI5N, a case depth of .010 inches plus .008 inches, and a minimum core hardness of 22 HRC, utilizing ASTM A1038 and ASTM E18 testing methods. The selected provider is required to maintain an active DD Form 2345 and sign a non-disclosure agreement. Final deliverables consist of the processed levers along with a formal certification of compliance. This opportunity is categorized under NAICS code 332813 and is associated with the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Electroless Nickel and Phosphate M20 Levers for the Watervliet Arsenal, NY

Solicitation # W911PT27QA017

Solicitation W911PT27QA017 is a Request for Quote issued by the Department of Defense for the Watervliet Arsenal in New York. The contract requires a small business contractor to apply Electroless Nickel and Phosphate coatings to an estimated 40 M20 Levers. Technical specifications require Electroless Nickel per SAE AMS2404, Class 2, Grade C with PTFE impregnation, and Phosphate application per MIL-DTL-16232, Type M, Class 2. The vendor is responsible for stress relief and hydrogen embrittlement relief, and must measure and record the final plated hole diameter within an acceptance range of .7498 minimum to .7528 maximum. Items are to be shipped in approximately seven lots of 4 to 10 pieces each, with the overall period of performance spanning from November 1, 2026, to October 31, 2029. The solicitation is a total small business set-aside under NAICS code 332813. To access technical drawings and data, interested parties must provide a company CAGE code and have an active DD Form 2345 on file. Proposals must be submitted electronically via the PIEE Solicitation Module by October 28, 2026. The contract is FOB Destination, and all payment requests and receiving reports must be processed through the Wide Area WorkFlow system. Additionally, all contractor personnel working at the arsenal must sign a non-disclosure agreement regarding Watervliet Arsenal technology and adhere to OSHA Voluntary Protection Program safety rules.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Contract to apply Ion Nitride to M20 Levers at the Watervliet Arsenal, Watervliet NY.

Solicitation # W911PT27QA016

Solicitation W911PT27QA016 is a total small business set-aside for off-post services to apply Ion Nitride to M20 Levers for the ACC Watervliet Arsenal in New York. The work must be performed in accordance with Drawing 11582539 and AMS2759/8 standards, with specific requirements for surface hardness, case depth, and core hardness. The contract spans from November 1, 2026, to October 31, 2029, consisting of a base period for FY27 with an estimated quantity of 30 pieces and two option periods for FY28 and FY29 with estimated quantities of 65 and 20 pieces, respectively. Deliveries are required within 15 calendar days of the lead time event and are shipped FOB Destination. The procurement is governed by NAICS code 332811 and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment. To access technical drawings, applicants must provide a CAGE code and have an active DD Form 2345 on file. Security requirements include a mandatory non-disclosure agreement for all personnel and strict prohibitions against releasing proprietary DoD specifications or critical military technology. Proposals must be submitted electronically via the PIEE Solicitation module by the specified deadline.

POSTED

DEADLINE

Protective Finish Application (Drawing # 7309999)This subcontract opportunity, issued by the Department of Defense under agency W6QK Acc Wva, requires a contractor to perform specialized protective coating and plating for gear rack units on Watervliet Arsenal projects. The selected provider will utilize industrial plating and surface preparation equipment to apply finishes that prevent corrosion and wear, ensuring all work strictly adheres to the specifications outlined in Drawing 7309999. The project is designated as a total Small Business Set Aside under NAICS code 332813. Interested parties must submit their responses by November 3, 2026, for performance located in zip code 12189. The primary objective is the successful delivery of finished coated gear racks that meet all technical requirements.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Gear Rack Fabrication (Drawing # 8767202)This small business set-aside subcontract involves the manufacture of 62 gear racks for the 155MM M284 Cannon, supporting prime contractors on Watervliet Arsenal projects for the Department of Defense. The fabrication process must strictly adhere to Drawing 8767202, Revision Y and NSN 3020008611478, utilizing precision milling and gear cutting equipment. The contractor is responsible for performing First Article Testing and ensuring all units meet MIL-STD-130 and MIL-STD-129 marking standards. Final deliverables include the 62 finished gear racks and all required contract data as specified by CDRL DD Form 1423.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

7 days ago

DEADLINE

in 7 days

View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS