Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER

Active
SPE4A1-26-T-2617Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of two washers, part number 1C6477P33, for the GE Co Aircraft Engine Business Group under the Aviation Supply Chain of the Department of Defense. The contract requires delivery within 10 days after the order is placed. The procurement is governed by specific technical and quality requirements, including source approval request documentation, DLA packaging standards, and strict guidelines regarding the removal of government identification from non-accepted supplies. The contract mandates that mercury or mercury-containing compounds must not be intentionally added to the hardware, with limited exceptions for specific functional components. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. All measuring and test equipment must comply with established standards to ensure the hardware meets the necessary technical specifications.

General Info

Procurement of two GE aircraft engine washers for DoD, delivered within ten days.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-2617.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUSA
Contacts
Angelina Dunlap
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER
WASHER
G.E. CO AIRCRAFT ENGINE BUSINESS GRP. (07482)
P/N 1C6477P33
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ADEQUATE DATA FOR NSN/Part Number: 5310-01-124-6196 Quantity: 2 EA Purchase Request: 7017761321QTY: 2 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-22RT
This contract is a solicitation for the procurement of 100 retaining rings under NSN 5325-00-944-8277. The requirement specifies several approved part numbers from Smalley Steel Ring Co, Spirolox Inc, and Hamilton Sundstrand Corporation. The delivery is required within 5 days after receipt of order, with FOB origin for both inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-130N for identification and MIL-STD-129 for marking. Logistics involve G&B Packing Company as the freight forwarder, with the final destination being the Government of Israel Ministry of Defense. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific provisions for the removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9451
This solicitation, issued by DLA Land and Maritime Strategic Acquisition Program Directorate under number SPE7LX-26-U-9451, is a Request for Quotations for a one-year Indefinite Delivery Contract (IDC) to procure Access Covers (NSN 5340-01-559-9845). The requirement is designated as a Total Small Business Set-Aside with an estimated annual quantity of 169 units and a maximum contract value of $350,000. The contract includes a guaranteed minimum quantity of 25 units and a minimum delivery order quantity of 42 units. The items are identified as Commercial Off the Shelf (COTS) and are classified as Critical Application Items. Deliveries are to be made within the continental United States on an FOB Origin basis, with a required delivery timeline of 116 days after delivery order acceptance. The contract incorporates rigorous technical, quality, and compliance standards. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with unspecified attributes treated as major. The items have a non-extendable Type I shelf life of 24 months and must comply with MIL-STD-130N for military property identification and MIL-STD-129 for marking. Compliance with the Buy American Act and the Berry Amendment is required, and any use of non-domestic materials must be disclosed. Additionally, the contract mandates strict adherence to cybersecurity protocols for safeguarding covered defense information and requires electronic invoicing and receiving via the Wide Area Workflow (WAWF) system. Quotations must be submitted by August 25, 2026, and must not include parts made via additive manufacturing unless specifically authorized.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-22UY
This contract is for the procurement of 25 plain slotted hexagon nuts, identified by part number MS9364-16 and NSN 5310009436609. The items must adhere to SAE AS9364 standards with a thread class of 3B and are designated as critical application items. The hardware must be manufactured according to the current revision of the part standard, though previously manufactured stock meeting the then-current revision is acceptable. The agreement specifies a delivery timeframe of five days with FOB origin for both inspection and acceptance. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Quality assurance is governed by specific DLA master list requirements, including tailored higher level quality requirements and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The final shipment is destined for the UH-60M Main Warehouse in Australia via a designated freight forwarder.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
Solicitation SPE4A6-26-T-17LV is a fixed-price request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 267 self-locking hexagon nuts under NSN 5310-00-982-5064. The items are to be delivered to DLA Distribution Jacksonville with a required delivery date of March 28, 2027, and a delivery period of 171 days. The procurement is fully competitive and requires hardware to be manufactured according to the current revision of the applicable part standard. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Inspection and acceptance are designated at the destination per FAR 52.246-2, though some provisions reference origin acceptance. Sampling must adhere to MIL-STD-1916 or ASQ H1331, and identification marking must follow MIL-STD-130N. Packaging must comply with MIL-STD-2073-1E and RP001, with a strict prohibition on the use of mercury or mercury-containing compounds. Offerors must comply with the Buy American Act and Berry Amendment, providing disclosure for any non-domestic materials. The government will not evaluate offers utilizing additive manufacturing. Payment and receiving reports must be processed electronically via Wide Area WorkFlow. A price evaluation preference is available for certified HUBZone small businesses. Quotations were due by August 24, 2026, to the point of contact, Erin Edwards.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-17YR
Solicitation SPE4A6-26-T-17YR is a request for quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 4,428 shear bolts, specifically part number NAS6604-5 under NSN 5306011308993. The items must be manufactured in accordance with the current revisions of NAS6603 through NAS6620 and NAS4002. Quality assurance requires that all Class 3A and 3B threads be inspected for dimensional conformance per System 22 of FED-STD-H28/20, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of February 23, 2027. Shipping is FOB Origin, with the destination for inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, while palletization must follow RP001. The contract incorporates various FAR and DFARS clauses, including restrictions on the use of additive manufacturing and a price evaluation preference for certified HUBZone small businesses. Payment and receiving reports are to be processed electronically via the Wide Area WorkFlow system.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSION
Solicitation # SPE4A6-26-T-17MB
Solicitation SPE4A6-26-T-17MB is a Request for Quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 11 units of spring tension washers, identified by NSN 5310-01-445-1502. The delivery is set for 171 days after award, with a required delivery date of December 11, 2026, and a need ship date of February 12, 2027. Shipping is FOB Destination to DLA Distribution San Joaquin in Tracy, California. The procurement is not a small business set-aside and falls under NAICS code 332722. Notably, there is no approved technical data package available for this item as the data is either proprietary or insufficient for competitive procurement. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Preservation must follow ASTM D3951, and the use of mercury or mercury compounds in preservation, packaging, and marking is strictly prohibited. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, targeting zero non-conformances. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XV
Solicitation SPE4A6-26-T-17XV is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 103 blind rivets, identified by NSN 5320010422897. The items are critical application components that must be manufactured according to the current revisions of part standards NAS9310 and NAS1687. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of March 19, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution Cherry Point in North Carolina, where both inspection and acceptance will take place. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must meet SAE AS9003 or ISO 9001 standards, with sampling conducted per MIL-STD-1916 or ASQ H1331, emphasizing a zero-nonconformance policy for sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment regarding domestic sourcing. The solicitation is open to small businesses, with a specific price evaluation preference for certified HUBZone concerns.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A7-26-T-670Q
This contract is for the procurement of 478 shear bolts, specifically part number NAS6206-7, identified by NSN 5306-01-157-9938. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of the applicable AIA/NAS part standards. Quality assurance requires inspection and acceptance at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Marking and identification must comply with MIL-STD-130 and SAE AS478, while dimensions and tolerances follow ASME Y14.5. Delivery is set for 158 days after order, with a required delivery date of December 17, 2026, and a need ship date of January 31, 2027. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA packaging requirements. The items are to be shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. This acquisition is managed by the Department of Defense under solicitation SPE4A7-26-T-670Q.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-16UR
Solicitation SPE4A6-26-T-16UR is a request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 1,100 flat washers under NSN 5310-00-235-3544. The contract requires delivery to DLA Distribution San Diego, California, with a delivery timeframe of 107 days after receipt of order and shipping terms set as FOB Destination. The procurement is managed through the DLA Internet Bid Board System (DIBBS) and utilizes Wide Area WorkFlow (WAWF) for electronic invoicing. The contractor must adhere to strict quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key compliance mandates include the prohibition of intentionally added mercury, adherence to export control regulations (ITAR/EAR) via JCP certification, and the removal of government identification from non-accepted supplies. Inspection and acceptance are conducted by the government at the point of origin.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-26-T-22QV
This contract is for the procurement of 255 self-locking plate nuts, identified as NSN 5310015971830 and part number M45913/1-010CS3. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Delivery is required within 249 days, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Identification marking must comply with MIL-STD-130N and MIL-STD-129, while packaging and palletization must follow MIL-STD-2073-1E and DLA requirement RP001. The contract specifies a zero percent quantity variance and mandates that inspection and acceptance occur at the destination.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT , PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-22TE
This contract is for the procurement of nine plain slotted hexagon nuts, identified by NSN 5310009436567 and part number MS9364-19. The items must adhere to the SAE AS9364B Revision B technical standard and meet specific DLA quality and packaging requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for delivery preparation. The contract prohibits the use of mercury or mercury compounds in preservation and packaging. Delivery is required within 20 days, with FOB and inspection points set at the origin. Sampling and quality assurance must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The finished goods are to be shipped to the General Depot of Naval Supplies in Kaohsiung City, Taiwan.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-18EB
Solicitation SPE4A6-26-T-18EB is a fixed-price request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 334 shear bolts identified by NSN 5306-01-261-1873. The items are defined as commercial products and must be manufactured according to the current revision of the applicable part standards. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of July 7, 2027. The place of performance and delivery is Hill AFB, Utah, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and technical standards, including SAE AS9003 or ISO 9001 for manufacturer inspection systems and MIL-STD-130N for identification marking. Packaging must comply with ASTM D3951 and DLA procurement requirements, while labeling must follow MIL-STD-129. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS guidelines regarding covered defense information and the prohibition of hexavalent chromium. Evaluation preferences are available for certified HUBZone small businesses, and the government will not consider offers utilizing additive manufacturing. Quotations must be submitted via the DIBBS portal.
ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SP
Solicitation # SPE4A1-26-T-2577
Solicitation SPE4A1-26-T-2577 is a request for quotations issued by DLA Aviation for the procurement of four nonmetallic special shaped section seals, identified by NSN 5330-01-529-6802 and Sikorsky part number 70209-52426-131. The items are designated as critical application items and must be delivered FOB Origin to the Central Receiving and Shipping Point at Fort Rucker, Alabama, with a required delivery date of August 7, 2026. The procurement requires strict adherence to supply chain traceability documentation per DLA Directive C03 and prohibits the use of asbestos. Technical requirements specify a maximum shelf life of 12 months in accordance with ASTM D6576. Due to the potential for deterioration from ultraviolet rays, the seals must be packaged in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, and marked according to MIL-STD-129. Inspection and acceptance will occur at the destination. The contractor must utilize the Wide Area WorkFlow (WAWF) system for all payment requests and receiving reports. Quotations are to be submitted electronically via the DLA Internet Bid Board System (DIBBS) by August 21, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE4A1-26-T-2693
This contract is for the procurement of 94 valve seats, identified as commercial items under NSN 4810011846568 and Honeywell part number 3162059-2. The order is managed by the Department of Defense Aviation Supply Chain under solicitation SPE4A1-26-T-2693, with a required delivery date of August 26, 2026, and a delivery timeframe of 221 days. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. The item is designated as a critical application item and must adhere to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the DLA Packaging Requirements for Procurement. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Item Unique Identification is not required for this order.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
SPRING, HELICAL, COMP
Solicitation # SPE4A1-26-T-2596
Solicitation SPE4A1-26-T-2596, issued by the DLA Aviation Supply Chain on August 17, 2026, seeks quotations for 65 units of helical compression springs, identified by NSN 5360-00-513-0767 and part number 1325868. The requirement is not a small business set-aside and is open to all qualified offerors. Delivery is required within 171 days after the order, with a need ship date of February 12, 2027, and a final required delivery date of May 13, 2027. The items are to be delivered FOB Origin to Arizona Industries for the Blind in Phoenix, Arizona. The contract mandates strict adherence to DLA packaging and marking requirements, specifically RP001, RQ017, and MIL-STD-129, with packaging to be performed in accordance with ASTM D3951. Quality assurance is governed by destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Key compliance requirements include a CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow system for electronic invoicing. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized. Quotes must be submitted via the DIBBS portal.
Nonferrous Forging

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A1-26-T-2614
This solicitation from the Department of Defense Aviation Supply Chain is for the procurement of 2,456 turnlock fastener studs under National Stock Number 5325-00-859-3781. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside and falls under NAICS code 332510. Delivery is required within 170 days after the order is received, with the place of performance located in Jacksonville, Florida. The agreement incorporates specific DLA technical and quality requirements, including RP001 for packaging and guidelines for bare item marking and the removal of government identification from non-accepted supplies. The solicitation, numbered SPE4A1-26-T-2614, requires responses by August 28, 2026.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332112
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2595
Solicitation SPE4A1-26-T-2595 is a Request for Quotations issued by DLA Aviation for the procurement of 671 machine bolts under NSN 5306001802783. The items must be manufactured according to the current revision of the applicable part standard, with specific reference to NASM5 and associated drawings. Delivery is required by February 12, 2027, with an original required delivery date of April 14, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and compliance standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, while the prohibition of intentionally added mercury is strictly enforced. The procurement also incorporates various DFARS and FAR clauses, including requirements for safeguarding covered defense information and compliance with the Buy American Act and Berry Amendment. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.
Nonferrous Forging

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANCE
Solicitation # SPE4A1-26-T-2602
Solicitation SPE4A1-26-T-2602 is a fixed-price request for quotations issued by DLA Aviation for the procurement of 166 close tolerance bolts, identified by NSN 5306011825185. The requirement is designated as a critical application item with a required delivery date of April 14, 2027, and a delivery window of 171 days after the order. The contract is managed under the First Destination Transportation program with shipping, inspection, and acceptance all occurring at the origin, with the final destination being DLA Distribution San Joaquin in Tracy, California. Compliance requirements are stringent, necessitating adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be marked per MIL-STD-129 and palletized according to RP001. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract mandates CMMC Level 2 self-assessment, adherence to the Buy American Act and Berry Amendment, and the use of the Wide Area Workflow system for electronic invoicing and receiving reports.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CLINCH
Solicitation # SPE4A1-26-T-2548
This solicitation, issued by the Department of Defense Aviation Supply Chain, is for the procurement of plain clinch nuts under NSN 5310-00-341-7465. The contract requires a total quantity of 261 packages, with each package containing two units. The place of performance is designated as Cherry Point, and the delivery timeline is set for 100 days after the order is placed. The procurement is governed by specific technical and quality requirements outlined in the DLA Master List, including mandatory packaging standards and regulations regarding the removal of government identification from non-accepted supplies. Interested parties must respond to solicitation SPE4A1-26-T-2548 by the deadline of August 19, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336411
New
DIBBS
OUTLET SHELL ASSEMB
Solicitation # SPE4A1-26-T-2621
This contract is for the procurement of three Outlet Shell Assemblies, identified by NSN 1660-00-875-7375 and Honeywell part number 82455-5. The agreement specifies a delivery timeframe of 165 days after the order, with a required delivery date of December 23, 2027. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and security standards, including ISO 9001:2015 and CMMC Level 2 self-assessment. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while sampling follows MIL-STD-1916 or ASQ H1331. Notably, Item Unique Identification is not required for this order. Inspection and acceptance are to take place at the destination.
Aircraft Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2592
Solicitation SPE4A1-26-T-2592, issued by DLA Aviation, is a request for quotations for 544,000 machine bolts identified by NSN 5306-00-616-2683 and part number STD P/N9034-06. The items must be manufactured according to basic specification MS9034C NOT 2, Revision C, dated February 1, 2023, and are designated as critical application items. The required delivery date is June 3, 2027, with a need ship date of February 12, 2027. Delivery is FOB destination to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and packaging standards, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Each fastener must have the entire length of the shank and threads protected by a wrap or sleeve. Inspection and acceptance will occur at the destination, with quality systems requiring compliance with SAE AS9003 or ISO 9001. Sampling shall follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware or packaging. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and receiving reports. Offerors must be registered in the System for Award Management and comply with the Buy American Act and the Berry Amendment. The solicitation also incorporates standard federal clauses regarding equal opportunity for workers with disabilities, safeguarding covered defense information, and prohibitions on certain telecommunications equipment.
Precision Turned Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A1-26-T-2610
Solicitation SPE4A1-26-T-2610 is a request for quotations issued by the Department of Defense, specifically the DLA Aviation Supply Chain, for the procurement of 40 machine bolts under NSN 5306016852182. The requirement is a simplified acquisition with a need ship date of February 12, 2027, and an original required delivery date of February 21, 2027. Delivery is established as FOB Destination, with the shipping and delivery point located at DLA Distribution Warner Robins in Georgia. Inspection and acceptance will also occur at the destination. The contract mandates strict adherence to DLA Master List technical and quality requirements, including the removal of government identification from non-accepted supplies and specific packaging standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware. Administrative requirements include the use of Wide Area Workflow for payment requests and receiving reports, and compliance with the Berry Amendment and Buy American Act regarding domestic material restrictions.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
PISTON, PRESSURE
Solicitation # SPE4A1-26-T-2616
This contract is for the procurement of 12 pressure pistons, identified by NSN 1630-01-076-5179 and part number 7-0291-1 from Triumph Actuation Systems Yakima, LLC. The items are classified as critical application commercial items. Delivery is required within 277 days, with a need date of May 30, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to various technical and quality standards, including CMMC Level 2 self-assessment, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Quality assurance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The contract incorporates multiple DLA master list requirements regarding configuration management, measuring and test equipment, and the removal of government identification from non-accepted supplies.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details
NAICS: 339999
New
DIBBS
ADAPTER, HOISTING
Solicitation # SPE4A1-26-T-2605
Solicitation SPE4A1-26-T-2605 is a fixed-price request for quotations issued by the DLA Aviation Supply Chain for the procurement of 38 hoisting adapters. The required item is identified as Honeywell International Inc. part number 3870169-1 and NSN 3940-01-363-1271. The procurement is designated as a critical application item with a need ship date of February 12, 2027, and an original required delivery date of October 8, 2028. Delivery is set as FOB Origin, with the final destination being DLA Distribution Cherry Point in North Carolina. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA packaging requirements for procurement under RP001. Technical and quality requirements are governed by the DLA Master List under RA001, and the removal of government identification from non-accepted supplies is required per RQ011. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and cybersecurity standards such as DFARS 252.204-7012. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.
All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 1 day
View Details