Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FINISHING

Active
SPE4A6-26-T-05WYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 62,946 washers, finishing, identified by NSN 5310-01-049-4086 and part number BACW10U-C102P, under solicitation SPE4A6-26-T-05WY. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements, with palletization aligned to RP001, while marking and identification adhere to RQ017 and removal of government identification from non-accepted items per RQ011. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified; attributes are classified as critical, major, or minor with corresponding verification levels or AQLs. The item is deemed a critical application item requiring source approval documentation per RC001. Delivery is FOB origin with a 332-day delivery window, inspection and acceptance occur at the destination in Tracy, CA, and no quantity variance is permitted. All packaging and labeling must meet the specified unit of issue and quantity per unit pack as defined in the contract, and transportation details are governed by DLAD procedural notes C19 and C20. The required ship date is July 14, 2026, with the original delivery deadline set for November 15, 2027.

General Info

Procure 62,946 washers NSN 5310-01-049-4086, FOB origin, delivery by Nov 15, 2027, zero defects, MIL-STD packaging, critical item.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05WY.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
KELA GRIFFIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FINISHING
WASHER,FINISHING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N BACW10U-C102P
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-05WY
SECTION B
PR: 7017486897 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486897 0001 EA 62,946.000
NSN/MATERIAL:5310010494086
DELIVERY (IN DAYS):0332
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:50
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:07/14/2026 Original Required Delivery Date:11/15/2027
SPE4A6-26-T-05WY NSN/Part Number: 5310-01-049-4086 Quantity: 62,946 EA Purchase Request: 7017486897QTY: 62946 Delivery: 332 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract is for 15 socket head cap screws identified by NSN 5305-01-479-7791, under solicitation SPE4A6-26-T-06AD, with a response deadline of July 22, 2026, and a delivery requirement of 171 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to Defense Logistics Agency packaging standards and requires physical identification and marking per RQ017. Export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 governs compliance. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate a CMMC Level 2 self-assessment or certification by a C3PAO, and covered defense information protocols are in effect. Removal of government identification from non-accepted supplies is prohibited. The place of performance is New Cumberland, PA, with Antonia Willcox as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEADThe contract pertains to the procurement of six hexagon head cap screws, identified by part number 284591-0001 and NSN 5305-01-479-0793, sourced from Marotta Controls Inc. All supplied hardware must strictly comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on acquisition scale. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking required. The items are to be delivered FOB origin to the designated receiving warehouse in Tracy, California, with a delivery window of 171 days from contract issuance, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds in any part of the hardware, packaging, preservation, or marking, with limited exceptions for functional uses in specific devices such as batteries, fluorescent lamps, sensors, or weapon systems, provided those items meet additional containment standards per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed in the sample lot, unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The solicitation number is SPE4A6-26-T-05YY, with a response deadline of July 22, 2026, and the primary point of contact is Monica Greene of the ASC Commodities Division. The original required delivery date was November 4, 2026, but the contract specifies a need ship date of January 10, 2027, aligning with the extended delivery timeframe.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of a commercially available hexagon cap screw identified as a commercial off-the-shelf (COTS) item with the NSN 5305-01-529-4431 and part numbers 92240A635 from McMaster-Carr and 71192 from Fastenal. The item is designated as a critical application component and must comply with stringent military standards including MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling. Technical and quality requirements referenced by R or I numbers from the DLA Master List supersede any other standards, including ASTM D3951. The product must be free of intentionally added mercury or mercury-containing compounds except in specified exceptions such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents approved by NAVSEA, and portable devices containing mercury must include a secondary containment boundary as per NAVSEA 5100-003D. Packaging must adhere to DLA-specific requirements for procurement, including palletization standards and unit packaging specifications, with delivery FOB origin within 20 days of contract award. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The sole delivery address is Marine Aviation Logistics Squadron MALS-24 at MCAS Kaneohe Bay, Hawaii, with specified shipping and transportation protocols detailed in DLAD procedural notes. The contract is under solicitation SPE4A6-26-T-06HS with a required delivery date of April 23, 2026, and is managed by the DLA Commodities Division with primary point of contact Lisa Harvie.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for 332 machine screws with NSN 5305-00-932-1831 under solicitation SPE4A6-26-T-06HB, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 359 days after award, with performance taking place in New Cumberland, Pennsylvania. The solicitation was posted on July 14, 2026, and responses are due by July 22, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and compliance is mandatory. The item includes technical data subject to export control under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals within the U.S. Contractors must hold a valid US/Canada Joint Certification Program status, complete required DLA export control training, and receive explicit approval to access the controlled data. Packaging must meet DLA standards, and non-accepted supplies must have all government identification removed. Higher-level quality requirements apply regardless of whether the supplier is a manufacturer or not, and the contract incorporates DFARS 252.225-7048 to enforce export control obligations.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThis contract pertains to the procurement of 269 shear bolts designated as special high-strength fasteners for use by the Department of Defense aviation community. The items must be manufactured, tested, and inspected in strict compliance with required technical data and referenced specifications, with all Class 3A and 3B threads subject to dimensional conformity inspection per System 22 of Fed-Std-H28/20, excluding self-locking nuts and threads below specified diameters. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed prior to return. All items require physical identification and bare item marking as specified. The solicitation, numbered SPE4A6-26-T-05XF, was posted on July 14, 2026, with responses due by July 22, 2026, and delivery is required within 171 days after delivery order issuance to New Cumberland, Pennsylvania, under NAICS code 332722. Primary point of contact is Tyler Greene of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details