Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

WASHER, FLAT

Awarded
SPE7M026F0049Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded contract SPE7M026F0049 to Jamaica Bearings Co., Inc. (CAGE 04836) on July 17, 2026, for a total value of $316,613.30 under the base contract SPE4A124G0002. This delivery order encompasses eleven line items of specialized mechanical and electrical components, including washers, solenoids, seals, valves, and hydraulic assemblies, all identified by National Stock Numbers and part numbers, destined for defense systems. The awardee’s performance location is in New Hyde Park, New York, with the contracting officer based in Columbus, Ohio. The contract incorporates FAR 52.222-90, implementing the Department of Defense’s Class Deviation 2026-00040, which prohibits contractors and subcontractors from engaging in discriminatory Diversity, Equity, and Inclusion practices and mandates reporting of noncompliance. No specific packaging, preservation, marking, inspection, or quality standards are detailed beyond the use of NSNs and CAGE codes, suggesting reliance on standard DOD inventory and identification practices. The award is firm-fixed-price in nature, though formally unclassified, with no delivery schedule, FOB terms, or quantity details provided. Payment and invoicing instructions are not specified, and while the contracting officer's contact information is available, no Contracting Officer’s Representative is named. The contractor’s size status, socioeconomic certifications, and Unique Entity Identifier are not documented in the award notice, and no evaluation factors or source selection criteria are included, as the document reflects a post-award modification under the Standard Form 30 format. Technical specifications, MIL-STD references, and acceptance criteria are omitted, implying that detailed requirements may reside in separate technical data packages not included in the available documentation.

General Info

Defense Logistics Agency awards Jamaica Bearings Co. $316,613.30 for precision mechanical components on July 17, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(1)

SPE7M026F0049_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS
ContactsNo contact information available

Full Description

Show more
DLA award SPE7M026F0049 posted on DIBBS. Awardee: JAMAICA BEARINGS CO., INC. (CAGE 04836) Total Contract Price: $316,613.30 Award Date: 07-17-2026 Delivery order under: SPE4A124G0002 Line items: - WASHER, FLAT (NSN/Part 5310015092910, PR 7014421836) - CASE, SOLENOID, LINEA (NSN/Part 1650003440814, PR 7007280573) - SOLENOID, ELECTRICAL (NSN/Part 5945010550207, PR 7012188827) - PLATE, PISTON SHOE B (NSN/Part 1650001994815, PR 7012536329) - SPRING ASSEMBLY, COM (NSN/Part 4320005580167, PR 7014657881) - SHAFT SEAL (NSN/Part 4730010695823, PR 7014417784) - HOUSING AND HELICOI (NSN/Part 2995009290666, PR 7014582264) - VALVE, SHUTOFF (NSN/Part 4820012088723, PR 7014418929) - SEAL, MOTOR, HYDRAULI (NSN/Part 5330002294027, PR 7012193271) - RETAINER, SEAL (NSN/Part 4730010405076, PR 7014415741) - GASKET (NSN/Part 5330012604702, PR 7014583124)

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
BOLT, HOOK
Solicitation # SPE4A1-26-T-2504
The contract pertains to the procurement of 25 BOLT, HOOK items with NSN 5306-01-503-9383 under solicitation SPE4A1-26-T-2504, requiring delivery within 20 days to FPO AP 96672 aboard USS MAKIN ISLAND LHD 8. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Packaging must follow DLA’s packaging requirements and be palletized according to RP001, with no tolerance for quantity variance—exactly 25 units must be delivered. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 with a zero-defect acceptance criterion unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The unit of issue is EA, with a unit price of $25.00 and a total contract value of $625.00. Items must be shipped via traceable transportation methods, avoiding parcel post, in accordance with DLAD PROC NOTES C19 and C20, and must bear proper identification per RQ017. The supplier, MCMASTER-CARR SUPPLY CO, must meet all government-unique requirements including the use of specified packaging data QUP:025 and reference to the correct DLA unit of issue standards. The required delivery date is July 27, 2026, and the contract is managed under the Department of Defense’s Aviation Supply Chain with primary point of contact Jade Stringfield.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIVET
Solicitation # SPE4A0-26-T-4129
The contract specifies the procurement of 10 plain blind rivet nuts with the NSN 5310-00-934-0222, supplied in cadmium-plated steel, to be delivered within five days of award. All items must comply with stringent quality and identification standards, including MIL-STD-130N for military property marking and adherence to DLA packaging requirements. The contract mandates compliance with specific Contract Data Requirements Lists such as DD Form 1423s and CDRLs related to quality certification, removal of government identification from non-accepted supplies, and physical identification of bare items. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Quality conformance inspections are required, and the manufacturer may elect attribute or variable inspection methods under MIL-STD-1916. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The solicitation number is SPE4A0-26-T-4129, posted August 2, 2026, with a response deadline of August 10, 2026, and the point of contact is Danita Davis of the Department of Defense’s Aviation Supply Chain ESoC Buys.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
GASKET AND PREFORME
Solicitation # SPE7L3-26-T-144U
The contract involves the procurement of a gasket and preformed packing assortment identified by NSN 5330015604081 and part number 285000840051880, with a total quantity of 57 thousand units to be delivered under solicitation SPE7L3-26-T-144U. Delivery is required within 46 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E specifications, including use of preservative method 33, dry packaging, and buffering materials, while marking adheres to MIL-STD-129 with no special marking required. The packaging and palletization must follow DLA’s procurement requirements, and hazardous materials handling is governed by IP025. The delivery destination is the DLA Distribution facility at New Cumberland, Pennsylvania, with a needed ship date of August 5, 2025, though the original required delivery date was May 15, 2025. The item is strictly prohibited from containing asbestos as defined by FED-STD-313, and government identification markings in non-accepted supplies must be removed per RQ011. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions. The unit of issue is KT, with no variance allowed in quantity, and all data aligns with DoD standards for procurement and logistics.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
CLIP, RETAINING
Solicitation # SPE7L3-26-U-0666
The contract pertains to the procurement of CLIP, RETAINING with NSN 5340-00-675-2101 and part number 55008, under solicitation SPE7L3-26-U-0666, for a quantity of 161 units at a unit price of $161.00, totaling $25,921.00. Delivery is required within 116 days FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, including adherence to MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Hazardous materials must be packaged per FED-STD-313 and TQ requirement IP025; non-hazardous items must be commercially packaged. Palletization must follow DLA’s procurement packaging requirements, and government identification must be removed from non-accepted supplies. The unit of issue is each (EA), and the contract specifies DLA Direct, CONUS coverage. The solicitation was posted on August 2, 2026, with a response deadline of August 17, 2026, under NAICS code 332722, managed by the Department of Defense’s Land Supplier Operations Vehicle Support. The primary point of contact is Stephen Weaver, reachable via email and phone. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List accessible through the designated website, with revision control determined by the solicitation or award date depending on acquisition size. Delivery is not guaranteed as the quantity is estimated and may not be fully purchased by the IDC. All packaging, labeling, and unit of issue must strictly align with contract specifications and DLA directives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 331315
New
DIBBS
HOUSING, LATCH PAN A
Solicitation # SPE8E5-26-T-3746
The contract is for one unit of a Housing, Latch Pan Assembly identified by part number 5599908-19 and NSN 5411-01-375-3695, with a requirement for delivery within 20 days after award. The item is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through an accredited third-party assessment organization, and packaging must adhere to DLA-specific guidelines. The supply is classified as covered defense information and is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. entities. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the technical data. The solicitation number is SPE8E5-26-T-3746, issued on August 2, 2026, with responses due by August 13, 2026, under NAICS code 331315, and performance is designated for FPO with ZIP 96667. The primary point of contact is Don Trachtman, reachable via email and phone provided, and the contract is managed by the Defense Logistics Agency under the Department of Defense.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
NOZZLE, FIRE EQUIPME
Solicitation # SPE8E6-26-T-3955
The contract pertains to the procurement of a single nozzle for fire equipment, identified by NSN 4210-01-658-7880 and part number 05000542, with a required delivery of five days from the date of award. The item is to be shipped FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, prioritizing those referenced by R or I numbers over general standards like ASTM D3951. If the item is non-hazardous per Fed-Std-313, it must be commercially packaged in accordance with ASTM D3951 but fully aligned with DLA’s superior specifications, including labeling and marking per MIL-STD-129 and palletization per RP001. Hazardous materials must meet TQ requirement IP025. The unit of issue is each, and one unit is ordered under purchase request 7017689821. Delivery must be made via the fastest traceable means, explicitly prohibiting parcel post, and shipped to the designated DLA retail facility in Albany, Georgia. The original required delivery date is August 4, 2026, and the contract was solicited under SPE8E6-26-T-3955 with a response deadline of August 13, 2026. All technical and quality compliance is governed by the DLA Master List in effect at the time of award, and the contracting officer is John Lieb of the Defense Logistics Agency.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 325520
New
DIBBS
PRIMER, SEALING COMP
Solicitation # SPE8ES-26-T-2485
The contract specifies the procurement of one unit of PRIMER, SEALING COMP with NSN 8030-01-672-0817 under solicitation SPE8ES-26-T-2485, issued by the Defense Logistics Agency. Delivery is required within 20 days to a designated military installation in Vallejo, California, with FOB destination terms and zero variance allowed in quantity. The item is classified as a TYPE I (CODE M) shelf-life item with a non-extendable 24-month shelf life, and all packaging, marking, and shipping must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Hazardous materials protocols must be followed per IP025, and shipment must be traceable, excluding parcel post. The item is subject to the Defense Federal Acquisition Regulation Supplement, including requirements for hazardous communication, government information handling, and technical quality standards referenced through R-numbers. Packaging and storage must maintain temperatures between -10°F and 110°F, with specific packaging methods and codes applied. The supplier must be the Industries for the Blind & Visually Impaired, identified by P/N 7XM97, and all documentation must reflect revision standards including MIL-STD-129R, MIL-STD-147F, and FED-STD-313F. The item is for government use only, with the designated point of contact and delivery instructions clearly outlined, including the freight address and mandatory marking code 32 for shelf-life compliance.
Adhesive Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, DOME
Solicitation # SPE8E7-26-T-3451
The contract pertains to the procurement of 10 units of LIGHT,DOME with NSN 6220-01-706-9275 under solicitation SPE8E7-26-T-3451, issued by the Defense Logistics Agency. Delivery is required within 20 days of award, with FOB origin terms, and inspection and acceptance occur at the destination. The item must be packaged in full compliance with DLA packaging requirements, specifically RP001, and labeled per MIL-STD-129. If not classified as hazardous under FED-STD-313, it must be commercially packaged according to ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence over any commercial standards. The packaging must adhere to specified Unit of Issue and Quantity per Unit Pack, with palletization following DLA guidelines. The delivery destination is FB5682 at Cargo Movement Element Building 1029 in Aviano, Italy, with transportation governed by DLAD procedural notes C19 and C20. The contract includes strict quantity variance limits of zero percent, meaning no over or under shipment is permitted. All documentation, including technical and quality requirements referenced by R or I numbers, is governed by the DLA Master List, with revision control tied to the solicitation issue date. The item is identified by multiple revision levels of technical data packages referencing drawing numbers 78286 and 78550-02801, and must be marked and traceable as specified. The point of contact is Kelly Mitchell, and the order is tied to project ACV TP 3 with government-only identifiers for tracking and disposition.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, NONRECHARGEABL
Solicitation # SPE7L7-26-T-4530
The contract specifies the procurement of a single non-rechargeable battery with NSN 6135-01-592-8698 and part number 11141-000100, supplied by Physio Control Corp, under solicitation SPE7L7-26-T-4530. The battery must meet a Type I shelf life of 60 months with no extension permitted, and it is subject to strict packaging, marking, and shipping requirements per MIL-STD-2073-1E and MIL-STD-129, including specialized packaging codes and hazardous material handling protocols. The item is classified as commercial off-the-shelf with adequate catalog data available, and mercury or mercury compounds are strictly prohibited except in functional components such as batteries, fluorescent lamps, or sensors as defined by NAVSEA, requiring secondary containment for mercury-containing portable devices. Sampling and quality verification are governed by MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified, and critical attributes are assigned verification levels or AQLs accordingly. Delivery is required FOB destination within five days of contract award, with inspection and acceptance also occurring at the destination. The sole delivery point is Fort Bragg, North Carolina, and shipments must be traceable via expedited means, excluding parcel post. All packaging and marking must align with DLA’s standardized requirements, and the contract enforces compliance with hazardous communication standards and the DLA Master List of Technical and Quality Requirements referenced via official online portals. The contract was posted on August 2, 2026, with a response deadline of August 13, 2026, and the original delivery date is July 24, 2026.
Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATI
Solicitation # SPE8E6-26-T-3948
This contract, issued under solicitation SPE8E6-26-T-3948 by the Defense Logistics Agency, pertains to the procurement of a Type I shelf-life item, P/N PSR-9-COMBUSTIBLE, with a 12-month non-extendable shelf life. The material must have at least 85% of its shelf life remaining upon delivery, with expiration and cure dates clearly marked in calendar quarter and year format in accordance with MIL-STD-129, and the expiration date must be exactly one year from the cure date. All packaging must comply with MIL-STD-2073-1E, and marking requirements must strictly follow MIL-STD-129, including the mandatory shelf-life labeling. Plastic materials are to be avoided for wrapping, cushioning, or dunnage whenever contractually permissible. The item is to be delivered FOB origin in a quantity of 4 purchase units within 20 days of contract award, with zero tolerance for variance in quantity. Inspection and acceptance occur at destination, and the delivery point is identified as W6FU SUP ACT MAINZ-WAC in Wackernheim, Germany. The contract incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation issue date. Transportation details are governed by DLAD procedural notes C19 and C20. The purchase unit is PG, and the total contract value is based on a unit price of $4.00, with a required delivery date of July 29, 2026. The item’s NSN is 7690-01-279-7614, and it is classified under NAICS code 323117, reflecting its origin as a defense-related labeling product supplied by American Labelmark Company.
Books Printing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
HUB, WHEEL, VEHICULAR
Solicitation # SPE7L7-26-T-4528
This contract pertains to the procurement of a single vehicle hub and wheel assembly identified by NSN 2530-01-666-7753 and part number 3992AS350-3, with a requirement for delivery of one unit within five days of contract award. The item is classified as a critical application item with a Type I shelf life of 60 months, which is non-extendable, and must be marked accordingly per special marking code 32. Strict packaging standards mandated by MIL-STD-2073-1E and MIL-STD-129 apply, including specific preservation methods, unit and intermediate container codes, and palletization in compliance with DLA packaging requirements. The item must be shipped via the fastest traceable means, explicitly excluding parcel post, with delivery FOB origin to the designated government facility at Naval Air Station Whidbey Island, Oak Harbor, WA. Zero tolerance for non-conformances is required during inspection, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, and all attributes must be verified at specified quality levels. The item must be free of intentional mercury or mercury compounds unless used in approved functional components like batteries or instruments, and any mercury-containing portable devices must include secondary containment as per NAVSEA guidance. Contract performance is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all provisions for inspection, acceptance, and hazardous material handling are binding under applicable military and federal standards.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333414
New
DIBBS
HEATING BLANKET, ELE
Solicitation # SPE8E8-26-T-4935
The contract pertains to the procurement of one heating blanket, electric, identified by NSN 4520-01-706-8039 and part number TW 025 000, under solicitation SPE8E8-26-T-4935, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 20 days of contract award, with FOB origin terms, and inspection and acceptance occurring at the destination point. The quantity is fixed at one unit with zero variance allowed. The item must be packaged in accordance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, and all packaging must be marked and labeled per MIL-STD-129. Palletization must comply with DLA packaging requirements. The blanket must be shipped via traceable freight to the designated military facility at Camp Pendleton, California, and parcel post is explicitly prohibited. The delivery address is identified with a military freight code, and the required delivery date is July 14, 2026. The contract is governed by federal acquisition regulations and incorporates specific technical and quality standards identified by R and I numbers from the DLA Master List, ensuring compliance with defense-specific performance and security criteria. Additionally, covered defense information requirements may apply, and the item is to be marked with the appropriate government usage codes.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details