Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, FLAT

Active
SPE4A0-26-T-4504Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of four flat washers, identified by NSN 5310-00-469-9202. The items must be manufactured from Grade A Bronze per MIL-M-16576, with specifications of a 1.000 inch outer diameter, 0.750 inch inner diameter, and 0.062 inch thickness. The order is subject to strict quality and sampling standards, including MIL-STD-1916 or ASQ H1331, and requires adherence to MIL-STD-130N for identification marking. Delivery is required within five days after order, with the shipping point and acceptance point both set at the origin. Packaging and palletization must comply with MIL-STD-2073-1E and DLA packaging requirements. The items are to be shipped via the fastest traceable means to the MG Oliver Otis Howard USARC in Auburn, Maine. Because casting or forging may be required for manufacture, the contract notes that special tooling may be necessary and provides guidance for requesting assistance through DLA channels.

General Info

Procurement of four Grade A Bronze flat washers delivered to Auburn, Maine.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

1072 MINOT AVE, AUBURN, ME, 04210-3746, USA

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4504.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
Danita Davis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER, FLAT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
BRONZE MIL-M-16576 19DEC61 GRADE A MATL OD 1.000 IN ID 0.750 IN THK 0.062 IN
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
TDP Rev A Gen 1 IAW BASIC UNK FF-W-92C(3) REVISION NR C DTD 05/19/2025
SPE4A0-26-T-4504
SECTION B
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018016633 0001 EA 4.000
NSN/MATERIAL:5310004699202
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:A
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W12G8W
W6KH HOWARD USAR CENTER
1072 MINOT AVENUE
AUBURN ME 04210-3746
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W90T5J
0619 TC CO TRANS MDM TRK C
MG OLIVER OTIS HOWARD USARC
1072 MINOT AVE
AUBURN ME 04210-3746
US
MARKFOR
SPE4A0-26-T-4504
SECTION B
PR: 7018016633 PRLI: 0001 CONT’D
W90T5J
0619 TC CO TRANS MDM TRK C
MG OLIVER OTIS HOWARD USARC
1072 MINOT AVE
AUBURN ME 04210-3746
US
M/F: (TCN) W90T5J62320007
RDD: N
PROJ: TP 1
SUPP ADD: W906CT SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A3A DIST: ADV: FC: MT
Need Ship Date:00/00/0000 Original Required Delivery Date:08/25/2026
SPE4A0-26-T-4504 NSN/Part Number: 5310-00-469-9202 Quantity: 4 EA Purchase Request: 7018016633QTY: 4 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SL
Solicitation # SPE4A6-26-T-23UX
This contract is for the procurement of nine slotted hexagon self-locking nuts, identified by NSN 5310-00-047-2394 and part number MS21225-6. The items are classified as critical application items and must adhere to technical specifications including NASM21225 Revision 3 and MIL-DTL-32258. Delivery is required within 20 days, with the original required delivery date set for April 23, 2026. The shipment is to be handled via a freight forwarder in Jacksonville, Florida, for final delivery to the Commanding Officer at the RSNF Naval Supply Center in Jubail, Saudi Arabia. Quality and compliance are governed by DLA master lists, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and establishes the inspection and acceptance points at the point of origin.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-23UY
This contract is for the procurement of machine screws, specifically part number NAS517-3-18 under NSN 5305-00-515-7460. The order consists of four units with a delivery requirement of 20 days. The items are designated as critical application items and must adhere to technical data package specifications, including NAS517 Revision 8 and associated quality assurance provisions. Quality and inspection are managed at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA packaging requirements. The shipment is destined for the Fuerza Aerea de Chile in Santiago, Chile, via the CEVA Air and Ocean USA freight forwarder in Miami, Florida.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24AG
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-24AG, is for the procurement of 20 machine screws identified by NSN 5305-01-463-4131. The item is classified as a Commercial Off The Shelf product and must be delivered within 20 days after the order is received. The contract requires adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the supplier must ensure the removal of government identification from any non-accepted supplies. Responses to this solicitation are due by September 4, 2026, and the primary point of contact for this acquisition is Lisa Harvie.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-23ZU
This contract is a solicitation from the Department of Defense, specifically the ASC Commodities Division, for the procurement of one plain hexagon nut under NSN 5310-01-692-1534. The delivery requirement is set for 20 days after order. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging and the removal of government identification from non-accepted supplies. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24CT
This contract is for the procurement of machine screws under solicitation SPE4A6-26-T-24CT, with a total quantity of 50 packages, each containing 100 pieces. The items are identified by NSN 5305-00-901-3782 and must adhere to specific technical standards, including NASM27039 Revision 6 and NASM7839 Revision 2. As a critical application item, the screws must meet strict gauging requirements for Class 3A and 3B threads per FED-STD-H28/20 and comply with MIL-STD-130N for physical identification and marking. Delivery is required within 20 days, with the original required delivery date set for May 21, 2025. The contract specifies FOB Origin for both inspection and acceptance. Packaging and palletization must follow MIL-STD-2073-1E and DLA packaging requirements, with final shipment directed to the RTN Air Wing in Thailand via the designated freight forwarder, FMS Logistics LLC. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and a Certificate of Quality Compliance is required.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PLUG, PROTECTIVE, DUST A
Solicitation # SPE7L1-26-T-04F8
This solicitation from the Department of Defense Land Supply Chain is for the procurement of one protective dust and moisture seal plug assembly for a PU exhaust, identified by NSN 5340-01-128-4459. The contract requires delivery within 10 days after receipt of order. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data.
LAND SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, LOCK
Solicitation # SPE7M2-26-T-6550
This contract is for the procurement of 80 lock washers, identified by NSN 5310-01-477-3214 and associated with Curtiss-Wright Electro-Mechanical part numbers. The requirement is a total small business set-aside under the Nuclear Reactor Program of the Department of Defense. Delivery is required within 62 days after order, with a need ship date of November 10, 2026, and a final delivery date of January 12, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except for specific functional exceptions defined by NAVSEA. Technical requirements are governed by the DLA Master List and reference drawing 88032 PL14006N18 Revision A1.
NUCLEAR REACTOR PROGRAM

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
BOLT, CLOSE TOLERANC
Solicitation # SPE4A1-26-T-2700
This contract is for the procurement of one close tolerance bolt, identified by NSN 5306011825184 and part number HS5039-0261. The item is classified as a commercial critical application item and must be manufactured according to reference drawing 02731 HS5039 Revision G. Approved manufacturers include The Boeing Company, SPS Technologies, Avibank Mfg, Fastener Technology Corp, and Space-Lok. The agreement specifies a delivery timeframe of 20 days after receipt of order, with a required delivery date of May 4, 2026. Shipping is FOB Origin and destined for the 2nd Supply Depot in Busan, South Korea. Quality assurance requires adherence to MIL-STD-1916 or ASQ H1331 sampling plans, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. Physical identification and marking must follow MIL-STD-129.
AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-23VT
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 20 shear bolts under part number 5306-01-158-9460. The contract requires delivery within 5 days after receipt of order. It is governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for physical identification, bare item marking, and adherence to DLA packaging standards. Inspection and acceptance are to be conducted at the origin. Compliance requirements include CMMC Level 2 certification and the protection of covered defense information. The item is subject to strict export controls under ITAR or EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export training.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-23WV
This contract is for the procurement of one flat washer, identified by NSN 5310-01-176-7025. The order is designated as a critical application item with approved parts from Fastener Technology Corp and SPS Technologies, LLC. Delivery is required within five days after receipt, with the original required delivery date set for May 12, 2026. The shipment is to be delivered FOB Origin to the 2nd Supply Depot in Busan, South Korea. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. Quality assurance will be conducted at the point of origin using sampling methods consistent with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Additional compliance measures include the removal of government identification from non-accepted supplies and the use of approved measuring and test equipment.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24CV
This contract is for the procurement of machine screws under solicitation SPE4A6-26-T-24CV for the Department of Defense. The order consists of 9 packages, with each package containing 100 units, identified by NSN 5305-00-901-3782. Delivery is required within 20 days after order, with the shipping destination located in Rota, Spain. The items are designated as critical application hardware and must conform to specific technical standards, including NASM27039 and NASM7839. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and a Certificate of Quality Compliance is required.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-24BJ
This contract is a solicitation for the procurement of 1,636 self-locking machine bolts under NSN 5306-01-206-5451. Issued by the Department of Defense ASC Commodities Division, the requirement specifies a delivery timeline of 56 days after receipt of order. The items must be manufactured according to current military or consensus non-government part standards, though hardware produced under previous revisions remains acceptable. Compliance requires adherence to several technical and quality standards, including DLA packaging requirements, physical item marking per MIL-STD-130N, and the removal of government identification from non-accepted supplies. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a focus on zero-based sampling plans. Inspection and acceptance are to be conducted at the origin.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A0-26-T-4495
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one screw thread insert under NSN 5325-01-447-3446. The contract requires delivery within five days after receipt of order, with the place of performance located in Milwaukee, Wisconsin. The agreement is subject to several technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. It also notes that covered defense information may apply. Interested parties must respond by September 4, 2026, in accordance with the guidelines set forth in the DLA Master List of Technical and Quality Requirements.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A0-26-T-4514
This contract is for the procurement of one unit of electrical insulation tape, identified by NSN 5970-01-588-5080 and part number 3304920 from Olympus America Inc. The item is designated as a critical application item with a shelf life of 18 months. Delivery is required within 5 days after order, with the original required delivery date set for August 24, 2026. The shipment is to be delivered FOB origin to Fairchild AFB in Washington using the fastest traceable means. Quality assurance is governed by strict sampling methods according to MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. The contract mandates specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including a Type II shelf life marking. Inspection and acceptance are to be conducted at the origin, and the agreement incorporates the DLA Master List of Technical and Quality Requirements.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A0-26-T-4494
This contract is for the procurement of one spacer plate, identified by NSN 5365015755139 and Daimler Truck North America part number WWS 13303-3421. The solicitation, numbered SPE4A0-26-T-4494, is issued by the Department of Defense Aviation Supply Chain ESOC Buys. Delivery is required within five days after order, with a required delivery date of August 25, 2026. The shipment is to be delivered FOB Origin to CPL Gordon M Craig USARC in Brockton, Massachusetts, using the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the point of origin.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW TE 1.4-20 UNC
Solicitation # SPE4A0-26-T-4503
This contract is for the procurement of two units of SCREW TE 1.4-20 UNC, identified by NSN 5305014952105 and part number 01.0001.0093. The order is issued by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4503. Delivery is required within five days of order, with the final destination being the USALRCTR at Fort Eustis, Virginia. The supplier must adhere to DLA Master List technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances in sample lots. Shipping must be handled via the fastest traceable means, excluding parcel post, with a required delivery date of August 21, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, WASHER, THRUST
Solicitation # SPE4A0-26-T-4497
This contract is for the procurement of one thrust washer bearing, identified by NSN 3120-01-385-4627 and part number 9306-46 from Highland Engineering, Inc. The order is managed by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4497. Delivery is required within five days after receipt of the order, with a required delivery date of August 21, 2026. The agreement specifies that the item must be delivered FOB Origin and will be inspected and accepted at the destination, which is Fort Campbell, Kentucky. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements and technical quality standards. The shipment must be sent via the fastest traceable means, and the contractor is prohibited from using parcel post.
Ball and Roller Bearing Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HOT BONDER-CONTROLL
Solicitation # SPE4A0-26-T-4512
This contract, identified as SPE4A0-26-T-4512, is for the procurement of a Hot Bonder-Control aircraft single zone composite repair set, part number HCS9000B, manufactured by Heatcon Composite Systems. The order consists of two separate line items, each for a quantity of one unit under NSN 4920014624658. Delivery is required within five days after receipt of order, with required delivery dates set for August 20 and August 21, 2026. Shipments are destined for Fairchild AFB in Washington and Fort Hood TX, with delivery terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor is responsible for notifying the government of any configuration or design changes to the commercial off-the-shelf items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements to follow DLA packaging standards and avoid the use of plastics for wrapping or cushioning where possible. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this request.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
LINK, SPLINED
Solicitation # SPE4A0-26-T-4499
This contract is for the procurement of two splined links, identified by NSN 3040012788752 and Lockheed Martin part number 5497626-6. The order is issued by the Department of Defense Aviation Supply Chain under solicitation SPE4A0-26-T-4499, with a required delivery date of August 24, 2026, and a delivery window of five days after receipt of order. The items are to be shipped FOB destination to the USS Carney DDG 64. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A0-26-T-4511
This contract is for the procurement of one wiring harness, identified by NSN 5995015778569 and HDT Expeditionary Systems Inc part number 178K0102-1. The order is managed under solicitation number SPE4A0-26-T-4511 for the Department of Defense Aviation Supply Chain. Delivery is required within five days after the order is placed, with the shipment designated as FOB Origin and the final destination located at Prince Sultan Air Base in Saudi Arabia. The supplier must adhere to strict packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, as well as DLA packaging requirements specified in RP001. Inspection and acceptance will take place at the destination. The contract also incorporates specific technical and quality requirements via the DLA master list and mandates the removal of government identification from any non-accepted supplies.
Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
KEY, MACHINE
Solicitation # SPE4A0-26-T-4513
This contract, identified as solicitation SPE4A0-26-T-4513, is for the procurement of one machine key, part number N0304 from The Gorman-Rupp Company, under NSN 5315015585100. The acquisition is managed by the Department of Defense Aviation Supply Chain ESOC Buys, with a required delivery date of August 24, 2026. Delivery is specified as FOB Origin, with a delivery window of five days after order. The item must be delivered to Fort Wainwright, Alaska, and must adhere to strict technical and quality requirements, including DLA packaging standards RP001 and marking standards MIL-STD-129. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies per requirement RQ011.
Other Fabricated Wire Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A0-26-T-4491
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one radio frequency cable assembly, identified by NSN 5995-01-592-3978. The contract requires delivery within five days after receipt of order and is governed by specific technical and quality requirements outlined in the DLA Master List. The agreement includes strict compliance with covered defense information and export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization. Contractors must possess an approved US/Canada Joint Certification Program certification and complete required training to access export-controlled data. Additionally, the contract specifies requirements for packaging, configuration change management, and the removal of government identification from non-accepted supplies, though item unique identification is not required.
Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
STATION, FIRE ALARM,
Solicitation # SPE4A0-26-T-4488
This contract is for the procurement of one fire alarm station, identified as a commercial off the shelf item with NSN 6350-01-683-2607 and part number NBG-12L. The requirement is managed by the Department of Defense Aviation Supply Chain ESOC Buys under solicitation number SPE4A0-26-T-4488. Delivery is required within five days of order, with the item shipped FOB Origin to the Distribution Management Office in Jacksonville, Florida. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero based sampling plan. The agreement also incorporates specific technical and quality requirements regarding the removal of government identification from non-accepted supplies and the physical marking of bare items.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A0-26-T-4518
This contract is for the procurement of cable assemblies under solicitation SPE4A0-26-T-4518 for the Department of Defense. It consists of two line items, each for one unit of NSN 6150016630901, with delivery required within five days. The items are to be delivered FOB Origin, with shipping destinations located at Joint Base Lewis McChord, Washington, and Fort Bragg, North Carolina. The agreement mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and specific DLA master list technical requirements. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-defect acceptance policy for sample lots. The required delivery dates are set for August 24 and August 27, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details