Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE4A6-26-T-07AVFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 23 flat washers with NSN/Part Number 5310-00-579-7830, issued under solicitation SPE4A6-26-T-07AV with a response deadline of July 24, 2026, and a delivery requirement of 108 days after order. The item falls under NAICS code 332722 and is managed by the Defense Logistics Agency’s ASC Commodities Division. Technical and quality requirements are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging, testing equipment, and cybersecurity standards are mandated through specific R codes, including CMMC Level 2 certification for third-party assessors. The washers are subject to export control under ITAR or EAR, restricting technical data disclosure to authorized entities only; contractors must hold US/Canada Joint Certification Program approval, complete mandatory DOD export control training, and obtain DLA authorization before accessing controlled data. DFARS 252.225-7048 applies to all technical data handling. Physical identification and configuration management protocols must be followed, and any removal of government markings from non-accepted supplies is prohibited. The place of performance is in New Cumberland, Pennsylvania, 17070-5002, with Lisa Harvie as the primary point of contact.

General Info

23 flat washers, NSN 5310-00-579-7830, delivery in 108 days, ITAR/EAR controlled, CMMC Level 2, New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07AV for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
LISA HARVIE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER, FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RT001: MEASURING AND TEST EQUIPMENT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-00-579-7830 Quantity: 23 EA Purchase Request: 7017528518QTY: 23 Delivery: 108 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in 34 minutes

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 50 hexagon head cap screws identified by NSN 5305-01-258-9108 under solicitation SPE4A6-26-T-06ZJ, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless a later amendment is issued. Packaging must comply with DLA standards, and all supplies must be free of intentional mercury or mercury-containing compounds, except for specified functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA; portable mercury-containing devices must be shockproof and feature a secondary containment boundary per NAVSEA 5100-003D. Item identification must follow MIL-STD-130N paragraph 4.1.b(2), in addition to standard manufacturer marks, and any government identification on non-accepted supplies must be removed. Sampling and inspection are to be conducted using MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in the sample lot unless otherwise directed, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size. The procurement is fully competitive under federal guidelines, managed by the ASC Commodities Division of the Department of Defense, with primary point of contact Charece Smith at DLA.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 35 units of a socket head cap screw identified by NSN 5305-01-617-5060 and part number 15666156-3 under solicitation SPE4A6-26-T-04CP. Delivery is required within 171 days of award, with a specified need ship date of January 3, 2027, and an original required delivery date of November 16, 2026. Goods must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Palletization and preservation methods must meet DLA packaging requirements, explicitly prohibiting mercury or mercury compounds in any packaging materials. The contract incorporates technical and quality requirements from the DLA Master List, and sampling procedures follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. The item is subject to DLA’s unit of issue standards and defense information handling rules, with final delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. This solicitation is a federal procurement under NAICS code 332722, managed by the Department of Defense’s ASC Commodities Division, with Xavier Keyes as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, BEVELThe contract pertains to the procurement of eight bevel washers identified by NSN 5310-01-658-3478, with a delivery requirement of 20 days after order. The solicitation, issued under number SPE4A6-26-T-06VZ on July 16, 2026, with a response deadline of July 24, 2026, is managed by the ASC Commodities Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted items must have government identification removed. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stipulated. Documentation for source approval must meet RC001 requirements, and all work is subject to the specified quality assurance provisions. The primary point of contact is Krystle Bailey, reachable at the provided phone and email.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details