Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE4A6-26-T-06QLFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 967 flat washers identified by NSN 5310-01-352-9581 and part number MS15795-746, manufactured in accordance with NASM15795 Revision 3 and referenced standard FF-W-92C(3), with technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. The item is designated as a critical application item and must comply with MIL-STD-130N for identification marking as well as MIL-STD-129 for packaging and labeling. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be verified at specified levels: VII for critical, IV for major, and II for minor, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet ASTM D3951 standards while ensuring compliance with all higher-priority DLA requirements, and palletization must adhere to RP001. The washers are to be delivered FOB origin within 170 days to DLA Distribution San Diego, with no variance permitted in quantity. Inspection and acceptance occur at the destination. The unit of issue is each, and all packaging must be marked and labeled as prescribed. The contract was solicited under SPE4A6-26-T-06QL with a response deadline of July 23, 2026, and the original delivery requirement is November 21, 2026, with a need ship date of January 10, 2027.

General Info

Procure 967 flat washers NSN 5310-01-352-9581, comply with MIL-STD-130N, 129, 1916, deliver FOB origin by Nov 21, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-06QL.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ASHLEY SACOLICK
contact@example.gov

Full Description

Show more
WASHER,FLAT
WASHER,FLAT
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NASM15795 REVISION NR 3 DTD 04/30/2019 PART PIECE NUMBER: STD P/N MS15795-746
TDP Rev A Gen 1 IAW REFERENCE UNK FF-W-92C(3) REVISION NR C DTD 05/19/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A6-26-T-06QL
SECTION B
PR: 7017487225 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017487225 0001 EA 967.000
NSN/MATERIAL:5310013529581
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:01/10/2027 Original Required Delivery Date:11/21/2026
SPE4A6-26-T-06QL NSN/Part Number: 5310-01-352-9581 Quantity: 967 EA Purchase Request: 7017487225QTY: 967 Delivery: 170 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract specifies the procurement of 286 machine screws with NSN/Part Number 5305-01-659-6831 under solicitation SPE4A6-26-T-06RU, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 149 days after award, with performance to occur in New Cumberland, PA. The solicitation is subject to stringent technical and quality requirements referenced from the DLA Master List, including CMMC Level 2 certification for third-party assessors, physical identification and bare item marking, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The item is governed by export control regulations under ITAR or EAR, restricting technical data access to contractors with approved JCP certification, completed DOD export training, and formal DLA authorization. Data handling complies with DFARS 252.225-7048, and distribution is limited to U.S.-approved entities. Packaging must meet DLA standards, and covered defense information protocols apply throughout. The solicitation closed on July 23, 2026, with bids submitted under NAICS code 332722 for federal procurement.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAROfferors must comply with strict requirements regarding telecommunications equipment, domestic sourcing, and manufacturing processes for this solicitation. The contractor is prohibited from providing covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016, and must affirmatively represent compliance. Domestic material restrictions under the Berry Amendment, Buy American Act, and related clauses apply with a reduced threshold of $150,000; any non-domestic materials require full disclosure to the point of contact. Offers must not include items produced via additive manufacturing unless prior written approval is obtained, and such submissions will be deemed non-responsive without it. Small business joint ventures must submit specific certifications under FAR provisions 52.212-3 and 52.219-1 for eligibility categories including small business, service-disabled veteran-owned, women-owned, and HUBZone statuses. Due to fluctuating demand, offerors are strongly urged to provide range-based pricing rather than fixed quantities to allow flexibility in award decisions without resolicitation. Fast Pay is not available for this solicitation. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability; those using VSM WebServices must update their internal schema by the specified date or lose access. A No Bid submission is encouraged if quoting after the closing date to avoid assumptions of non-responsiveness. The item under solicitation is a bolt, shear, with an NSN of 5306-01-185-0572 and a requirement for 38 units, with a delivery deadline of 20 days after order placement and a response deadline of July 23, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of ten flat washers with NSN 5310-01-707-3471 under solicitation SPE4A6-26-T-06ST, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within ten days of award, and the place of performance is located at Fort Hood, Texas, with a response deadline of July 23, 2026. The item is subject to strict export control regulations under ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons—even those within the U.S.—without prior authorization from the Departments of State or Commerce. Contractors must comply with DFARS 252.225-7048 and have an approved US/Canada Joint Certification Program certification, complete required DOD training on export control, and pass a DLA questionnaire to gain access to the controlled data. Additionally, the contract incorporates Technical and Quality Requirements from the DLA Master List and mandates adherence to DLA packaging standards, as well as the removal of government identification from non-accepted supplies. The solicitation is classified under NAICS code 332722 and is open without set-aside status. All data handling must conform to CMMC Level 2 standards, requiring the vendor to be a certified third-party assessment organization.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 30 flat washers with NSN 5310-01-593-7341 under solicitation SPE7L4-26-T-5640, issued by the Department of Defense through the Defense Logistics Agency. The item must be delivered within 10 days to Joint Base Elmendorf-Richardson in Alaska, with delivery terms FOB origin, no variance allowed in quantity, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. The washers are sourced from approved suppliers listed under their respective part numbers, and the contract enforces compliance with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The purchase request number is 7017493857, the unit price is $0.00, and the total contract value is $30.00, with delivery required no later than July 13, 2026. The contract specifies the point of contact as Anna-Rachelle Betts, with primary correspondence handled via email and phone provided. The transportation and shipping procedures are governed by DLA procedural notes C19 and C20, with the government delivery address, shipping address, and mark-for address all identical. The solicitation was posted on July 15, 2026, with responses due by July 27, 2026. The NAICS code 332722 indicates classification under manufacturing of other fabricated metal products. The contract is designated for federal use only, with an IPD code of 05 and DIC code A01, and the underlying transaction is tied to project TP 2 under the Combat Vehicles and Armament branch of the DoD.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
SPRING, HELICAL, COMPThis contract specifies the procurement of 36 helical compression springs with the NSN 5360-01-542-0474 and part number 229671, under solicitation SPE7L1-26-T-838L. The unit of issue is each (EA), with a fixed unit price of $36.00 and a total contract value of $1,296. Delivery is required FOB origin within 106 days of the contract award, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951 and MIL-STD-129, with packaging and palletization strictly following DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. The springs are to be delivered to Arizona Industries for the Blind in Phoenix, AZ, with a need ship date of April 21, 2026 and an original required delivery date of July 5, 2026. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List in effect on the solicitation issue date. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20. The point of contact for this solicitation is Adam Howell of the Department of Defense, Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 12 days
View Details