This Solicitation opportunity from Department Of Defense was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
WASHER, FLAT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the procurement of 101 flat washers with specific dimensional tolerances: inner diameter between 0.508 and 0.525 inches, outer diameter between 0.927 and 0.947 inches, and thickness between 0.057 and 0.068 inches. The washers must be made of steel with cadmium plating and comply with specification FF-W-92B, Type A, Class A, Grade I. All sharp edges must be broken to a range of 0.005 to 0.015 inches. The item is identified by NSN 5310-00-148-4719 and is subject to stringent quality conformance requirements, including inspection per MIL-STD-1916 or a comparable zero-based sampling plan, with acceptance requiring zero non-conformances unless otherwise specified. Critical, major, and minor attributes are assigned verification levels or AQLs of VII, IV, and II, or 0.1, 1.0, and 4.0 respectively. The washers must be marked and packaged according to MIL-STD-129 and MIL-STD-2073-1E, with Item Unique Identification (IUID) applied via Data Matrix barcode per MIL-STD-130N. Packaging must adhere to DLA’s RP001 requirements, and no mercury or mercury-containing compounds may be used in preservation, packaging, or marking, except for functional uses in batteries, fluorescent lights, sensors, or NAVSEA-specified reagents, which must be contained within a secondary barrier per NAVSEA 5100-003D. Hexavalent chromium is prohibited. The contractor must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements via RA001. Delivery is required FOB origin to DLA Distribution in New Cumberland, Pennsylvania, within 150 days after award, with final acceptance occurring at the destination. Payment must be submitted electronically through WAWF. The solicitation is open only to registered entities with valid UEI and CAGE codes, and includes clause obligations related to equal opportunity, trafficking in persons, employment eligibility verification, cybersecurity safeguards, whistleblower rights, and restrictions on procurement from Communist Chinese military companies. Small business representation and socioeconomic certifications are required, and the solicitation is issued under NAICS code
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
WASHER, FLAT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
STEEL, CAD PLATED
MAX: IN ID 0.525, OD 0.947, THK 0.068
MIN: IN ID 0.508, OD 0.927, THK 0.057 TYPE A, CLASS A, GRADE I IN
ACCORDANCE WITH FF-W-92B
BREAK ALL SHARP EDGES 0.005 TO 0.015 IN
SPEC APPLIES EXCEPT FOR VARIATIONS CITED
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
SPE4A6-26-T-04JC
SECTION B
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5310-00-148-4719 Quantity: 101 HD Purchase Request: 7017200617QTY: 101 Delivery: 150 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS