Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE4A6-26-T-22F5Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 698 flat washers with NSN 5310-01-007-0434 under solicitation SPE4A6-26-T-22F5, with a delivery deadline of 146 days after order. The item is classified as a commercial item and must comply with a suite of technical, quality, and packaging requirements governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date. Quality assurance provisions include inspection and acceptance at origin, mandatory bare item marking, and removal of government identification from non-accepted supplies. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be verified at predefined levels or AQLs. A Certificate of Conformance is authorized unless explicitly withheld. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location. Access to controlled data is limited to DLA contractors with approved JCP certification, completed DOD export control training, and prior DLA authorization. The contract is managed by the ASC Commodities Division under the Department of Defense, with performance to occur at Hill AFB, and all inquiries directed to Christopher Conte.

General Info

698 flat washers delivered in 146 days, must comply with DLA tech specs, ITAR/EAR controls, zero defects, JCP-certified access only.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

331529 - Other Nonferrous Metal Foundries (except Die-Casting)View NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-22F5 for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Christopher Conte
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER, FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
SPE4A6-26-T-22F5
SECTION B
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-01-007-0434 Quantity: 698 EA Purchase Request: 7016336064QTY: 698 Delivery: 146 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331529
New
DIBBS
WASHER, FLATThe contract is for the procurement of 1,976 flat washers with NSN 5310-00-177-0978, specified under solicitation SPE4A6-26-T-07WQ, issued by the Department of Defense’s ASC Commodities Division. The item must conform to MIL-STD-130N for identification marking and TDP Revision A based on NASM25440 Revision NR 1 dated April 27, 2012, with additional reference to FF-W-92C(3). Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures required to follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise stated. Critical attributes are to be verified at Level VII with an AQL of 0.1. Packaging must adhere to MIL-STD-2073-1E with preservation method code 10 per ASTM D3951, and labeling must meet MIL-STD-129 with no special marking required. Palletization and packaging must comply with DLA’s RP001 requirements. Delivery is FOB origin with a 165-day lead time, and the full quantity must be delivered to the specified receiving warehouse in Tracy, CA by January 10, 2027. No variance in quantity is permitted, and inspection and acceptance occur at the destination. The item is classified as a critical application item, and all non-accepted supplies must have government identification removed. The contract mandates that all marking, preservation, and packaging strictly follow federal standards, and transportation details are governed by DLAD procedural notes C19 and C20. The purchase request number is 7017487044, and all units are issued as each (EA). Point of contact for inquiries is Krystle Bailey at the DLA.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331529
New
DIBBS
Metal Material Supply for Bracket FabricationThis contract is a small business set-aside for the supply of certified aluminum or steel alloy materials intended for use in the fabrication of mounting brackets, with all materials required to meet MIL-DTL or ASTM industry standards to ensure structural integrity and compatibility with defense-grade applications. The solicitation, issued under the NAICS code 331529 for Other Aluminum Rolling, Drawing, and Extruding, is managed by the Department of Defense through the LAND SUPPLY CHAIN organization and is exclusively open to small businesses as defined by the Small Business Administration, ensuring that only qualifying entities may submit responses. The materials must be delivered to support bracket production requirements, though the specific performance location and point of contact are not provided in the available details. The solicitation was posted on July 19, 2026, with a firm response deadline of August 3, 2026, indicating a two-week window for interested vendors to prepare and submit proposals. As a subcontract opportunity, the successful awardee will likely serve a prime contractor within the defense supply chain, and all deliveries must align with the technical and certification requirements outlined in the applicable military and material specifications. Access to the full solicitation and submission portal is available via the provided DIBBS link, and bidders must ensure full compliance with quality assurance protocols, documentation, and delivery timelines to meet contractual obligations.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 331529
New
DIBBS
WASHER, FLATThe contract is for the procurement of flat washers designated by NSN 5310-01-199-1354 and part number NAS1149D0563K, meeting technical standards referenced in DLA’s Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation or award date. The item is classified as a critical application product, subject to stringent quality controls including zero non-conformances in sampling under MIL-STD-1916 or ASQ H1331, with attributes assigned specific verification levels and AQLs. The manufacturer must ensure no intentional addition of mercury or mercury-containing compounds to the hardware, except for specified exemptions like batteries, fluorescent lamps, and instrumentation, which must incorporate shock-proof design and secondary containment as per NAVSEA 5100-003D. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization guided by DLA’s packaging requirements, and no special marking is to be applied. The contract includes two line items totaling 26,743 units, with 9,508 units delivered to Corpus Christi, Texas, and 17,235 units to New Cumberland, Pennsylvania. All deliveries are FOB origin, with a strict 0% variance allowed on quantity and inspection and acceptance occurring at the destination. The required delivery date is March 10, 2027, with a need-by ship date of January 13, 2027, and a delivery window of 169 days. Unit of issue is each (EA), and pricing is set at $701,753.64 total across both line items. Transportation logistics are governed by DLA Procurement Notes C19 and C20, and the supply chain is managed under the DLA’s authorized unit of issue framework. The solicitation was issued on July 19, 2026, with a response deadline of July 27, 2026, under contract number SPE4A6-26-T-07MT, with primary point of contact at the Department of Defense’s ASC Commod
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 331529
New
DIBBS
Aluminum Alloy Metal Bar SupplyThe contract calls for the supply of precision-forged aluminum alloy 2014-T6 bars that must strictly comply with military specifications governing chemical composition, mechanical temper, and full traceability of raw materials through to final product. Each batch requires accompanying mill certification to verify adherence to these rigorous standards, ensuring material integrity for critical defense applications. The bars are intended for use at Dover Air Force Base, with performance and delivery obligations tied to this location. This subcontract is issued by the Defense Logistics Agency under the Department of Defense and falls under NAICS code 331529, indicating activity in nonferrous metal rolling, drawing, and extruding. The solicitation was posted on July 16, 2026, with responses due by July 24, 2026, leaving a narrow window for qualified suppliers to submit offers. Participation is restricted to subcontractors meeting the technical, quality, and certification requirements without formal set-aside provisions, making it open to any eligible entity capable of fulfilling the precise material standards outlined.
Defense Logistics Agency

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 331529
New
DIBBS
Domestic Sourcing & Material Compliance SupportThe contract requires the supply of domestically sourced raw materials or sub-components that fully comply with the Buy American Act and the Berry Amendment for use in the production of CLAMP and LOOP systems. All materials must originate from within the United States and meet strict domestic content requirements to ensure alignment with federal procurement mandates designed to support U.S. manufacturing and national security interests. The materials will be utilized in critical defense-related manufacturing processes within the FLUID HANDLING DIVISION under the Department of Defense. Performance of this subcontract is designated for Hill Air Force Base, Utah, with a deadline for responses set for July 27, 2026. The North American Industry Classification System code 331529 indicates the focus on other forged and stamped metal product manufacturing, underscoring the nature of the components involved. While no specific set-aside provisions are indicated, the contract is structured as a subcontract, meaning eligibility and compliance will hinge on the prime contractor’s obligations and the subcontractor’s ability to demonstrate full adherence to domestic sourcing statutes. The opportunity is accessible via the DIBBS platform for qualified suppliers seeking to support defense production with compliant materials.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 331529
New
DIBBS
Raw Metal and Alloy SupplyThe contract is for the supply of specified ferrous and non-ferrous metals, including cast iron and aluminum alloys, intended for casting applications. All materials must meet full traceability requirements and comply strictly with DLA technical specifications to ensure quality and consistency for defense-related uses. The solicitation is structured as a subcontract set aside entirely for small businesses under the SBA program, with the NAICS code 331529 designating it within the primary metal manufacturing sector. The opportunity was posted on July 14, 2026, with responses due by July 29, 2026, and is managed by the Land Supply Chain organization under the Department of Defense. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS portal for interested small business vendors.
LAND SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 331529
Federal
9930--Supply and Distribute Flat Bronze MarkersThe contract solicitation 36C78626R0067 for the supply and distribution of flat bronze markers is structured as an indefinite-delivery, indefinite-quantity (IDIQ) agreement under the National Cemetery Administration of the Department of Veterans Affairs, with a potential ordering period extending from October 1, 2026, through September 30, 2031. The contract includes a base year and four option years, each with identical quantities for four line items: standard flat bronze markers (B1), markers for the Medal of Honor (B6), old-style markers (T1), and scrap marker credits, totaling over 61,000 standard markers annually across all years. Award will be made on a lowest price technically acceptable (LPTA) basis, with price being the most critical factor, followed by technical acceptability—requiring a satisfactory bronze sample, experience, key personnel, and quality control plan—all of which must pass a binary acceptable/unacceptable evaluation. Past performance must be rated satisfactory or better, and contractors must have valid Small Disadvantaged Veteran-Owned Small Business (SDVOSB) or Veteran-Owned Small Business (VOSB) certification if claiming such status. All proposals must be submitted electronically in four designated PDF volumes and one Excel pricing spreadsheet by email to Weston.Worsham@va.gov, with physical bronze samples mailed to the Quantico National Cemetery address by the July 24, 2026, deadline. Markers must conform to specific dimensional and surface quality standards defined in attached drawings and the Sample Review Form, with each unit requiring a uniform clear coating free of defects and certified bronze composition records retained for five years beyond contract completion. Packaging must ensure protection during transit, with each packaged unit not exceeding 20 pounds, and all shipping, delivery fees, and return logistics fully the contractor’s responsibility. Delivery must occur within 20 calendar days of order issuance, or within 10 days for priority “10-day special” orders, under FOB-Destination terms. Invoicing is restricted to the VA’s Electronic Invoice Presentment and Payment (EIPP) system via Tungsten Network, with no use of WAWF. Contractors are subject to stringent compliance with multiple FAR and VAAR clauses, including restrictions on subcontractor sales, whistleblower protections, prohibitions on inverted domestic corporations, and prohibitions on using products from covered foreign entities under the FASCSA, along with requirements for system for award management
National Cemetery Administration (36C786)

POSTED

8 days ago

DEADLINE

in 3 days
View Details
NAICS: 331529
DIBBS
Aluminum Alloy 7075-T6 Metal Bar Supply
Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 331529
Federal
Vehicle Recompete: Idc 36C78623D0048The contract pertains to the IDC vehicle 36C78623D0048, with an ordering period that concludes on March 31, 2027. It is managed by the National Cemetery Administration under the Department of Veterans Affairs. The contract is classified as a full recompete with a high confidence rating. The original solicitation number for this vehicle was 36C78623Q0013, and the contract has an indefinite delivery/indefinite quantity ceiling of approximately $1.67 million. There is no set-aside applied to this procurement. Currently, there are no active task orders under this vehicle; however, a notable previous task order includes the Bronze Medallions Exercise Option 1 valued at approximately $283,731.86, awarded to Matthews International Corporation. The contract falls under NAICS code 331529, which covers the manufacturing of nonferrous metal foundries. This vehicle serves as a vehicle recompete to fulfill ongoing and future requirements for bronze medallions, supporting the mission of the National Cemetery Administration.
National Cemetery Administration (36C786)

POSTED

10 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 811212
New
DIBBS
Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.
Computer and Office Machine Repair and Maintenance

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541990
New
DIBBS
Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.
All Other Professional, Scientific, and Technical Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging and Preservation ServicesThe contract requires the packaging and preservation of fasteners in strict compliance with MIL-STD-2073-1E, ensuring all items undergo thorough cleaning and drying processes followed by thread protection using a wrap or sleeve designated by Packaging Code ZZ. Fasteners must be containerized using Unit/Intermediate Container D3 at Packing Level B to meet military standards for shipment and storage readiness. This work is part of a subcontract under the ASC COMMODITIES DIVISION of the Department of Defense, with a solicitation window open from July 20, 2026, through July 28, 2026. The North American Industry Classification System code 493190 applies, indicating services related to courier and messenger services and warehousing and storage, reflecting the logistical and preservation nature of the work. All performance must conform to military specifications without exception, and the contract is open to qualified subcontractors responding through the DLA DIBBS portal.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Fastener Manufacturing and SupplyThe contract requires the manufacture or supply of exactly 50 units of a close tolerance screw designated by NSN 5305-01-047-8822, engineered to meet stringent military specifications. Full traceability of materials and manufacturing processes is mandatory, ensuring each unit can be documented from raw material sourcing through final inspection. The deliverables are subject to ITAR and EAR regulations, necessitating strict compliance with export control requirements for all associated technical data, documentation, and communications. Performance is tied to defense standards, and the work falls under NAICS code 332721, indicating precision hardware manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, under a subcontract structure managed by the ASC Commodities Division of the Department of Defense. All activities must align with federal defense procurement protocols, and the point of performance is not geographically specified, suggesting potential flexibility in production location as long as compliance and delivery obligations are met.
Precision Turned Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires full compliance with OSHA standards for hazard communication regarding pins or packaging that may contain hazardous substances, mandating the provision of Material Safety Data Sheets and appropriate hazard warning labels. All elements of communication must align with federal safety regulations to ensure proper identification and handling of chemical risks associated with the products. The work is governed under NAICS code 541690 and is structured as a subcontract awarded by the ASC Commodities Division of the Department of Defense, with performance expected at a facility in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Interested parties must submit responses by the deadline of July 28, 2026, following the solicitation posted on July 20, 2026, through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CDI SafeguardingThe contract requires implementation of NIST SP 800-171 security controls to safeguard Covered Defense Information handled by the contractor, ensuring compliance with federal cybersecurity standards for protecting sensitive unclassified information related to DoD operations. All systems and processes must be configured to meet the full scope of the NIST framework, including access control, audit accountability, incident response, and data encryption, to mitigate risks associated with unauthorized access or data breaches. The contractor is obligated to detect, report, and respond to any cyber incident involving Covered Defense Information within 72 hours of discovery, following established DoD protocols for incident reporting and forensic documentation. This subcontract, issued by the ASC Commodities Division under the Department of Defense, pertains to work performed at the place of performance in New Cumberland, Pennsylvania, with a NAICS code of 541512 indicating IT services and related consulting. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with no set-aside classification specified. Compliance with the contractual cybersecurity mandates is non-negotiable and directly tied to the contractor’s ability to handle federal defense information. Failure to adhere to the required controls or timely incident reporting may result in contract termination, penalties, or loss of eligibility for future DoD work.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipping of Defense SuppliesThe contract requires the transport and delivery of packaged defense fasteners within 144 days, adhering strictly to military shipping standards and mandatory WAWF reporting protocols. The scope encompasses both domestic and international shipping operations, ensuring timely and compliant movement of critical defense supplies to the designated performance location in New Cumberland, Pennsylvania, with the zip code 17070-5002. All logistics must align with the NAICS code 484220, which classifies the activity under truck transportation of freight. The contract is structured as a subcontract under the ASC Commodities Division of the Department of Defense, with a response deadline set for July 28, 2026, and the solicitation was posted on July 20, 2026. Compliance with defense logistics regulations and accurate documentation through WAWF are non-negotiable requirements for successful contract execution.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Inspection and Quality Assurance at OriginThe contract requires comprehensive inspection and quality assurance services at the manufacturing site in New Cumberland, Pennsylvania, with a focus on first-article and lot acceptance inspections conducted in accordance with MIL-STD-1916. This includes the verification of all critical, major, and minor product attributes to ensure compliance with established military standards. The work is structured as a subcontract under the NAICS code 541330, indicating engineering and technical services, and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by July 28, 2026, and the performance location is fixed at the specified zip code 17070-5002. All inspection activities must be carried out on-site at the origin to validate conformity before lot release, ensuring product integrity and adherence to defense quality requirements.
Engineering Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and LabelingThe contract requires compliance with MIL-STD-129 and ASTM D3951 for the packaging, marking, and labeling of military fasteners, ensuring adherence to standardized military specifications for traceability, durability, and uniformity. All packaging must include accurate identification data, barcoding, and proper handling instructions as mandated by these standards, with additional requirements for hazardous material communication if the fasteners or associated components contain regulated substances. The work must be performed in alignment with Department of Defense protocols and delivered to the specified place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002. This is a subcontract opportunity under NAICS code 493190, and responses are due by July 28, 2026, with the solicitation posted on July 20, 2026, through the DIBBS system.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Precision Fastener ManufacturingThe contract involves the manufacture of 891 precision straight headed pins to meet stringent military specifications NASM20392 and NASM5673, intended for critical aerospace applications where reliability and exacting standards are paramount. The work requires adherence to exact dimensional, material, and finish requirements dictated by these military standards, ensuring performance under extreme operational conditions. All units must be produced in compliance with quality control protocols consistent with defense sector expectations, with final inspection and documentation to verify conformance before delivery. The contract is classified as a subcontract under NAICS code 332510 for forging and stamping, and is solicited by the ASC Commodities Division of the Department of Defense. Proposals are due by July 28, 2026, with the place of performance designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on July 20, 2026, and is accessible through the DIBBS platform, indicating the procurement is part of the Defense Logistics Agency’s supply chain infrastructure to support national defense aerospace needs.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI Protection ServicesThe contract requires the provision of cybersecurity compliance services to ensure adherence to CMMC Level 2 and NIST SP 800-171 standards for the protection of controlled unclassified information. The scope of work centers on implementing and maintaining the necessary safeguards, policies, and procedures to meet federal cybersecurity requirements for handling sensitive government data. Performance is expected to be executed at the designated location in Tracy, California, with the contractor responsible for establishing a compliant cybersecurity posture that aligns with Department of Defense standards for subcontractors handling CUI. The contract type is classified as a subcontract under NAICS code 541512, indicating it falls within the computer systems design and related services category. Issued by the ASC Commodities Division under the Department of Defense, the solicitation was posted on July 20, 2026, with responses due by July 28, 2026. All parties engaging in this effort must ensure full alignment with CMMC Level 2 controls, which include access management, audit and accountability, configuration management, incident response, and data protection measures. The contractor is expected to demonstrate readiness for third-party assessment and ongoing compliance validation without relying on external documentation or referenced files.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details