This Solicitation opportunity from Department Of Defense was posted on June 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WASHER, FLAT

Closed

SPE4A6-26-T-98U0Federal

Submission Closed06/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 331529

New

DIBBS

Domestic Sourcing & Material Compliance SupportThe contract requires the supply of domestically sourced raw materials or sub-components that fully comply with the Buy American Act and the Berry Amendment for use in the production of CLAMP and LOOP systems. All materials must originate from within the United States and meet strict domestic content requirements to ensure alignment with federal procurement mandates designed to support U.S. manufacturing and national security interests. The materials will be utilized in critical defense-related manufacturing processes within the FLUID HANDLING DIVISION under the Department of Defense. Performance of this subcontract is designated for Hill Air Force Base, Utah, with a deadline for responses set for July 27, 2026. The North American Industry Classification System code 331529 indicates the focus on other forged and stamped metal product manufacturing, underscoring the nature of the components involved. While no specific set-aside provisions are indicated, the contract is structured as a subcontract, meaning eligibility and compliance will hinge on the prime contractor’s obligations and the subcontractor’s ability to demonstrate full adherence to domestic sourcing statutes. The opportunity is accessible via the DIBBS platform for qualified suppliers seeking to support defense production with compliant materials.

FLUID HANDLING DIVISION

POSTED

DEADLINE

WASHER, FLATThe contract pertains to the procurement of 198 flat washers identified by the National Stock Number 5310-00-684-2724 under solicitation SPE4A6-26-T-01CF issued by the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on June 25, 2026, with a response deadline of July 6, 2026, indicating a standard procurement timeline for federal acquisition. The item falls under the NAICS code 332722, which corresponds to the manufacturing of machine shops and related services, suggesting the washers are produced by specialized industrial suppliers. The place of performance and point of contact information are unspecified, and the solicitation is categorized as a federal procurement with no set-asides designated, meaning it is open to all qualified contractors regardless of size or status. Interested parties can access further details through the provided DIBBS portal link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Raw Metal and Alloy SupplyThe contract is for the supply of specified ferrous and non-ferrous metals, including cast iron and aluminum alloys, intended for casting applications. All materials must meet full traceability requirements and comply strictly with DLA technical specifications to ensure quality and consistency for defense-related uses. The solicitation is structured as a subcontract set aside entirely for small businesses under the SBA program, with the NAICS code 331529 designating it within the primary metal manufacturing sector. The opportunity was posted on July 14, 2026, with responses due by July 29, 2026, and is managed by the Land Supply Chain organization under the Department of Defense. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS portal for interested small business vendors.

POSTED

DEADLINE

9930--Supply and Distribute Flat Bronze MarkersThe contract solicitation 36C78626R0067 for the supply and distribution of flat bronze markers is structured as an indefinite-delivery, indefinite-quantity (IDIQ) agreement under the National Cemetery Administration of the Department of Veterans Affairs, with a potential ordering period extending from October 1, 2026, through September 30, 2031. The contract includes a base year and four option years, each with identical quantities for four line items: standard flat bronze markers (B1), markers for the Medal of Honor (B6), old-style markers (T1), and scrap marker credits, totaling over 61,000 standard markers annually across all years. Award will be made on a lowest price technically acceptable (LPTA) basis, with price being the most critical factor, followed by technical acceptability—requiring a satisfactory bronze sample, experience, key personnel, and quality control plan—all of which must pass a binary acceptable/unacceptable evaluation. Past performance must be rated satisfactory or better, and contractors must have valid Small Disadvantaged Veteran-Owned Small Business (SDVOSB) or Veteran-Owned Small Business (VOSB) certification if claiming such status. All proposals must be submitted electronically in four designated PDF volumes and one Excel pricing spreadsheet by email to Weston.Worsham@va.gov, with physical bronze samples mailed to the Quantico National Cemetery address by the July 24, 2026, deadline. Markers must conform to specific dimensional and surface quality standards defined in attached drawings and the Sample Review Form, with each unit requiring a uniform clear coating free of defects and certified bronze composition records retained for five years beyond contract completion. Packaging must ensure protection during transit, with each packaged unit not exceeding 20 pounds, and all shipping, delivery fees, and return logistics fully the contractor’s responsibility. Delivery must occur within 20 calendar days of order issuance, or within 10 days for priority “10-day special” orders, under FOB-Destination terms. Invoicing is restricted to the VA’s Electronic Invoice Presentment and Payment (EIPP) system via Tungsten Network, with no use of WAWF. Contractors are subject to stringent compliance with multiple FAR and VAAR clauses, including restrictions on subcontractor sales, whistleblower protections, prohibitions on inverted domestic corporations, and prohibitions on using products from covered foreign entities under the FASCSA, along with requirements for system for award management

National Cemetery Administration (36C786)

POSTED

DEADLINE

WASHER, FLATThis contract is for the procurement of flat washers identified by NSN 5310009012581 under a solicitation issued by the Defense Logistics Agency through the DIBBS portal, with contract number SPE7M1-26-U-4313. The item is classified as a commercial item and is subject to strict technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. The contract is an indefinite-delivery contract with a guaranteed minimum order of 87 units and a maximum value cap of $350,000, though the estimated quantity of 583 units is non-binding and subject to actual delivery orders. Delivery is required within 53 days of award, FOB origin, with inspection and acceptance taking place at the destination point. Packaging must adhere to ASTM D3951 and be labeled per MIL-STD-129, including unit of issue and quantity per unit pack as specified, and palletization must comply with DLA Packaging Requirements RP001. Sampling for quality verification follows MIL-STD-1916 or an equivalent zero-based method, with verification levels assigned to critical, major, and minor attributes at AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise stated. The contract incorporates numerous far clauses related to cybersecurity, including safeguarding covered defense information and reporting cyber incidents, as well as compliance with hazardous material labeling, employment eligibility verification, combating human trafficking, and sustainable products. Contractors must register with a UEI and CAGE code, certify socioeconomic status if claiming small business advantages, and comply with whistleblower and former DoD official compensation restrictions. Electronic invoicing must be conducted through WAWF, and all packaging and labeling must include appropriate barcoding per MIL-STD-129D/E. The contract places full inspection and acceptance responsibility with the government, and suppliers are prohibited from removing government identification from rejected supplies.

MARITIME SUPPLY CHAIN

POSTED

11 days ago

DEADLINE

in 4 days

General Info

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

331529 - Other Nonferrous Metal Foundries (except Die-Casting)View NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-98U0.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 22

Solicitation

Response DeadlineJun 29

Deadline has passed

Submission Closed

06/29/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUS

Contacts

BRIANA MCCARTER

contact@example.gov

+1 (555) 000-0000

Full Description

WASHER,FLAT
WASHER, FLAT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
SPE4A6-26-T-98U0
SECTION B
PART STANDARD IN QUESTION.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
IAW BASIC NON GOVT STD NASM15795
REVISION NR 3 DTD 04/30/2019
PART PIECE NUMBER: P/N MS15795-429
IAW REFERENCE UNK FF-W-92C(3)
REVISION NR 3 DTD 05/19/2025
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017147276 0001 EA 27.000
NSN/MATERIAL:5310010220336
DELIVERY (IN DAYS):0162
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BD OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SPE4A6-26-T-98U0
SECTION B
PR: 7017147276 PRLI: 0001 CONT’D
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:12/09/2026 Original Required Delivery Date:01/22/2027
SPE4A6-26-T-98U0 NSN/Part Number: 5310-01-022-0336 Quantity: 27 EA Purchase Request: 7017147276QTY: 27 Delivery: 162 days ADO