Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

WASHER, FLAT

Awarded

SPE4A6-26-T-01NNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 99 flat washers with NSN 5310-01-594-9558 and part number AL-1256-C10 under solicitation SPE4A6-26-T-01NN, with a required delivery within 20 days of order placement. All items must conform to technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 packaging requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The delivery is FOB origin, with no variance allowed in quantity, and items must be shipped via the fastest traceable means excluding parcel post. Destination inspection and acceptance are required at the delivery point, with the receiving address being W8NW NC ARNG AASF 2 in Salisbury, North Carolina. Government use identifiers and tracking codes including RDD 555, project TP 3, and supplier code W90E3H are included for logistics control. The required delivery date is January 16, 2026, and the unit of issue is each (EA) at a price of $99.00 per unit.

General Info

Procurement of 99 flat washers via DLA solicitation SPE4A6-26-T-01NN, response due July 6, 2026, through DIBBS.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(2)

SPE4A626PAA23.pdf

PDF

SPE4A6-26-T-01NN.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseAwarded

PostedJul 6

Solicitation

Amendment 1Jul 6

Contract was updated

AwardedAug 25

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

ContactsNo contact information available

Full Description

Show more

DLA award SPE4A626PAA23 posted on DIBBS. Awardee: TRIMAN INDUSTRIES INC (CAGE 0ZBE8) Total Contract Price: $32,344.29 Award Date: 08-24-2026 Solicitation: SPE4A6-26-T-01NN Line items: - WASHER, FLAT (NSN/Part 5310015949558, PR 7015188161)

Similar Contracts

Same NAICS industry code

NUT, SELF-LOCKING, HEXAG

Solicitation # SPE7M2-26-T-6451

This contract is for the procurement of self-locking hexagon nuts, identified by NSN 5310-00-483-8790 and part number MS17829-6C. The total quantity requested is 28,621 units, divided across three delivery locations: DLA Distribution Depot Hill, DLA Distribution Cherry Point, and DLA Distribution New Cumberland. The items are classified as commercial and must be manufactured according to the current revision of the applicable part standards, including NASM17829 and NASM25027. Key requirements include strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging. The contract mandates a total prohibition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. Quality assurance is emphasized through the requirement of a Certificate of Quality Compliance and critical item source inspection. Delivery is specified as FOB Origin with a delivery window of 452 days, and the solicitation is designated as a HUBZone set-aside.

NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-689M

The Defense Logistics Agency of the Department of Defense has issued a solicitation for the procurement of eight machine bolts under NSN/Part Number 5306-01-622-3939. This federal requirement is identified by solicitation number SPE4A7-26-T-689M and is associated with purchase request 7017784003. The solicitation was officially posted on August 24, 2026, and the deadline for responses is set for September 1, 2026. Interested parties can find further details and submission guidelines through the provided DIBBS link.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE7L4-26-U-1139

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L4-26-U-1139 for the procurement of 16 hexagon head cap screws. The items are identified by NSN/Part Number 5305-01-613-7854 and are associated with purchase request 1000240635. This federal solicitation was posted on August 24, 2026, and requires responses to be submitted by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M2-26-T-6432

This contract is for the procurement of 7,143 lock washers, identified by NSN 5310-01-053-0832 and part number MS51848-45. The items are classified as critical application items and must adhere to basic specification MS51848E. The agreement specifies a delivery timeline of 161 days, with a required delivery date of June 19, 2027, and a need ship date of February 9, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. A significant environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its packaging, with limited exceptions for specific functional components. The procurement is conducted under full and open competition for the Nuclear Reactor Program within the Department of Defense.

NUCLEAR REACTOR PROGRAM

POSTED

about 16 hours ago

DEADLINE

NUT, SELF-LOCKING, EXTEN

Solicitation # SPE4A5-26-T-385H

This contract is for the procurement of 1,137 self-locking hexagon nuts with extended washers, identified by NSN 5310-01-669-3979 and Boeing part number BACN11AG3. The items are designated as critical application items and require a Certificate of Airworthiness and Conformance for FAA certified parts. Delivery is required within 165 days, with a need ship date of February 14, 2027, and shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict quality and technical requirements, including supply chain traceability documentation and FAA airworthiness approval. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Item Unique Identification is not required for this procurement.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-21WN

Solicitation SPE4A6-26-T-21WN is a federal requirement for 20 shear bolts, identified as item 5306 / 8019754. A critical requirement of this contract is the delivery of one first article unit to Hill Air Force Base within 120 calendar days for government testing. The government will notify the contractor of approval or disapproval within 150 days of receipt. These first article units are not part of the final production quantity and will be retained by the government as manufacturing standards or destroyed during testing. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and must certify that no covered telecommunications equipment or services will be provided. Additionally, contractors are required to register via the Account Management and Provisioning System to access the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized. Quotes should be submitted via DIBBS by September 1, 2026, and offerors are encouraged to provide quantity ranges to accommodate potential demand volatility.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A0-26-T-4453

This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of one machine screw under NSN 5305-26-300-5845. The contract requires delivery within five days after receipt of order, with performance taking place in Lewis McChord. The response deadline for this solicitation is September 1, 2026. The procurement is subject to several technical and quality requirements, including DLA packaging standards, source approval request documentation, and specific physical identification and bare item marking. While the material generally does not have a shelf life requirement, specific provisions for Type I items are noted. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, and Item Unique Identification is not required for this specific order.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-364B

This contract is a solicitation issued by the Department of Defense Fluid Handling Division for the procurement of 21 machine screws under NSN 5305014080413. The requirement specifies part number 1647715-8 from Mission Systems Davenport Inc. Delivery is required within 164 days, with a need ship date of February 16, 2027, and an original required delivery date of May 11, 2027. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination. The supplier must adhere to strict packaging and labeling standards, including ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. All technical and quality requirements are governed by the DLA Master List. Shipments are to be directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The solicitation is identified by number SPE7M4-26-T-364B and falls under NAICS code 332722.

FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

BACK-UP RING, PREFOR

Solicitation # SPE7L3-26-T-203E

This contract is for the procurement of 593 preformed back-up rings under solicitation SPE7L3-26-T-203E for the Department of Defense. The items must be manufactured according to the current revision of the applicable part standard, specifically referencing SAE AS8791D and MIL-STD-1330E. Key compliance requirements include a CMMC Level 2 self-assessment, adherence to quality conformance inspection requirements, and a strict prohibition on the use of asbestos, class I ozone-depleting chemicals, and intentionally added mercury. The items must be oxygen cleaned and packaged in accordance with MIL-STD-1330 and MIL-DTL-117 to protect against ultraviolet rays using waterproof, greaseproof, opaque bags. Inspection and acceptance will occur at the origin, with delivery required within 164 days. The final shipment is destined for the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of November 22, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

NUT, SELF-LOCKING, SPLIN

Solicitation # SPE4A6-26-T-21UX

This contract is for the procurement of 978 self-locking spline nuts, identified by NSN 5310-01-092-0238 and part number MS14164-06. The hardware must be manufactured in accordance with the current revision of the applicable part standards, specifically NASM14164 and NASM8922. The items are to be delivered FOB Origin to DLA Distribution San Diego, with a required delivery date of February 20, 2027, and a delivery window of 163 days. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero-based sampling required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Item Unique Identification is not required for this order, and the material has no specified shelf life. Technical and quality requirements are further detailed in the DLA Master List.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

STANDOFF, THREADED, SPAC

Solicitation # SPE7L1-26-T-01J7

This procurement contract is for the supply of 248 threaded spacing standoffs under National Stock Number 5340-01-197-5518. The delivery timeline is set for 168 days after the order is placed. The solicitation is managed by the Department of Defense Land Supply Chain agency, with performance located in New Cumberland, Pennsylvania. The contract mandates strict adherence to DLA packaging and quality conformance inspection requirements, including the submission of a Certificate of Quality Compliance. Contractors must comply with CMMC Level 2 certification and adhere to rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-21SV

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of four flat washers under National Stock Number 5310-01-605-2842. The contract requires delivery within 20 days after receipt of order, with the place of performance located in Pearl Harbor, Hawaii. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. Furthermore, the contract involves covered defense information and is subject to export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

HOSE ASSEMBLY, NONME

Solicitation # SPE7M1-26-U-5515

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7M1-26-U-5515 for the procurement of 28 nonmetallic hose assemblies. The items are identified by NSN/Part Number 4720-01-578-5195 and are associated with purchase request 1000240630. This federal solicitation was posted on August 24, 2026, and requires responses by the deadline of September 8, 2026. Interested parties can access further details and submission requirements through the official DIBBS portal.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 16 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2282

This solicitation from the Defense Logistics Agency is for the procurement of lead acid, charged, sealed storage batteries with F2 terminals, identified as a critical application commercial off the shelf item. The contract consists of two line items totaling 27 units, with 24 units destined for the Operational Logistics Command U.S. Coast Guard in Norfolk, Virginia, and 3 units for NAVFAC Mid-Atlantic in Virginia Beach, Virginia. The pricing is set as firm fixed price with a delivery requirement of 60 days after order. The batteries are classified as Type I with a non-extendable shelf life of 12 months. Compliance with specific technical and quality requirements is mandatory, including strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Due to the nature of the items, hazardous materials shipping regulations and the hazardous communication standard apply. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required in batteries.

Battery Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-4921

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of seven power supply units, identified by NSN 6130-01-687-8843. The required hardware corresponds to Siemens Energy Automation Inc. part number 6SL3120-1TE23-0AC0 or Wesco Distribution Inc. part number 804766-20825. This is designated as a critical application item with a required delivery date of August 4, 2026, and a delivery timeframe of 20 days after order. The agreement specifies that delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically Assault Craft Unit 4 in Virginia Beach, Virginia. Compliance with several technical and quality requirements is mandatory, including DLA packaging requirements, physical item marking, and the removal of government identification from non-accepted supplies. Shipping must be conducted via the fastest traceable means, and parcel post is explicitly prohibited.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L3-26-U-0715

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE7L3-26-U-0715 for the procurement of 52 units of webbing straps, identified by NSN 5340-01-649-2493. This federal requirement is tracked under purchase request 1000240638 and was officially posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 8, 2026. Further details and submission instructions are available through the DIBBS portal via the provided solicitation link.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 16 hours ago

DEADLINE

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-26-T-22CG

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A6-26-T-22CG for the procurement of one power cable assembly. This federal requirement is identified by NSN/Part Number 6150-01-680-9963 and is associated with purchase request 7017924723. The solicitation was posted on August 24, 2026, and the deadline for responses is September 1, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

CASE, POWER SUPPLY

Solicitation # SPE7L7-26-T-4912

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one power supply case, identified by NSN 6130-01-657-3621 and part number H313753-1. The requirement specifies a delivery timeframe of 20 days after order, with shipping handled via traceable means to a destination in Los Alamitos, California. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, as well as sampling methods aligned with MIL-STD-1916 or ASQ H1331. Key compliance mandates include the prohibition of intentionally added mercury or mercury-containing compounds, except in specific functional cases such as batteries or sensors. The agreement also incorporates requirements for the removal of government identification from non-accepted supplies and the protection of covered defense information. Inspection and acceptance are to take place at the destination, with a zero percent quantity variance allowed.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L1-26-U-0625

The Defense Logistics Agency of the Department of Defense has issued solicitation SPE7L1-26-U-0625 for the procurement of 186 gaskets. The required items are identified by NSN/Part Number 5330-00-785-6767 and are associated with purchase request 1000240565. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L7-26-Q-2281

This contract is a solicitation from the Defense Logistics Agency for the procurement of three sealed maintenance-free gel lead acid battery cells, part number M356380, under a firm fixed price agreement. The items are destined for the USS Arlington, USS Dwight D Eisenhower, and USS John P Murtha, with a delivery requirement of 60 days after order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 and MIL-STD-2073-1E, and requires the provision of MSDS/PSDS due to the hazardous nature of the materials. Quality assurance will be conducted via zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the batteries are classified as Type I items with a non-extendable shelf life of 12 months.

POSTED

about 16 hours ago

DEADLINE

STRUT ASSEMBLY, BY P

Solicitation # SPE4A7-26-T-689T

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A7-26-T-689T for the procurement of five strut assemblies. The items are identified by National Stock Number 1560-00-777-9248 and are associated with purchase request 7017308797. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 1, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

POSTED

about 16 hours ago

DEADLINE

BRACKET, FIRE EXTING

Solicitation # SPE8E6-26-Q-0664

This solicitation, numbered SPE8E6-26-Q-0664, is issued by the Defense Logistics Agency for the procurement of fire extinguisher brackets under NSN 4210-01-729-5790. The requirement is split into three line items, each requesting a quantity of 2 units, for a total of 6 brackets. The contract is established as a Firm Fixed Price agreement with a delivery timeline of 60 days after the order is placed. The items are destined for three separate locations: two in Schofield Barracks, Hawaii, and one at Fort Bragg, North Carolina. All shipments must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging requirements. Inspection and acceptance will take place at the destination, and the freight terms are FOB Origin.

POSTED

about 16 hours ago

DEADLINE