Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, FLAT

Active
SPE4A6-26-T-14QHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one package of flat washers identified by NSN 5310-01-578-1452 and part number 7017749604, with a required delivery within five days of contract award. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and must be packaged in accordance with MIL-STD-129 and DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances mandatory unless otherwise stated. The washers must be physically marked per RQ017 and meet all Defense Information handling protocols under RD003. Delivery is FOB origin to Hill Air Force Base, Utah, with no variance allowed in quantity. Shipment must use the fastest traceable means, explicitly excluding parcel post, and must align with the RDD 777 designation. The unit of issue is PG, and all labeling and palletization must reflect the specified QUP. The solicitation number is SPE4A6-26-T-14QH, with a response deadline of August 17, 2026, and the primary point of contact is Xavier Keyes of the Department of Defense’s ASC Commodities Division.

General Info

Procure one NSN 5310-01-578-1452 washer package, deliver FOB origin to Hill AFB in five days, comply with DLA, MIL-STD, and zero defects.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

5851 F AVE BLDG 849W, HILL AFB, UT, 84056-5713, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14QH Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Xavier Keyes
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER, FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
TDP Rev A Gen 1 IAW BASIC DRAWING NR 81337 9-2-9825 REVISION NR DTD 02/07/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017749604 0001 PG 1.000
SPE4A6-26-T-14QH
SECTION B
PR: 7017749604 PRLI: 0001 CONT’D
NSN/MATERIAL:5310015781452
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB2029
FB2029 OO ALC DDHU CNTRL RCV
CP 385 519 8898
5851 F AVE BLDG 849W
HILL AFB UT 84056-5713
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB2029
FB2029 OO ALC DDHU CNTRL RCV
CP 385 519 8898
5851 F AVE BLDG 849W
HILL AFB UT 84056
US
M/F: (TCN) FB202962151221
RDD: 777
PROJ: TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 0A ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/07/2026
SPE4A6-26-T-14QH NSN/Part Number: 5310-01-578-1452 Quantity: 1 PG Purchase Request: 7017749604QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
INJECTOR ASSEMBLY, F
Solicitation # SPE7L1-26-T-946Q
The contract is for one fuel injector assembly, part number 4928260 with NSN 2910-01-710-6138, designated as a critical application item under solicitation SPE7L1-26-T-946Q. The item must be delivered in a single unit within 20 days, with delivery terms FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with specific packaging codes and methods outlined including unit container E5 and intermediate container E5. Palletization must follow RP001 DLA packaging requirements, and no special marking is required. The delivery destination is the Navy Expeditionary Logistics Support Group in Williamsburg, Virginia, but parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The original required delivery date is August 10, 2026, and the contract includes project code ZH9 TP 2 and government-use identifiers for tracking. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 336310 for motor vehicle parts manufacturing, managed by the Department of Defense's Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-945X
The contract is for the procurement of 103 O-RINGS with NSN 5331-01-281-2339 under solicitation number SPE7L1-26-T-945X, issued by the Department of Defense through the Land Supply Chain. Delivery is required within 100 days of award, with the solicitation posted on August 9, 2026, and responses due by August 20, 2026. The item falls under NAICS code 336310 and is to be delivered to New Cumberland, Pennsylvania, 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract prohibits the use of Class I ozone-depleting chemicals and asbestos, superseding any conflicting specification requirements, and mandates approved substitutes where applicable. Access to restricted technical data is limited to U.S. persons who complete a mandatory form from the DLA Foreign Secure folder. The primary point of contact is Robert Warne, reachable at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
SHROUD, FAN, RADIATOR
Solicitation # SPE7L1-26-T-943Y
The contract pertains to the procurement of one unit of a SHROUD, FAN, RADIATOR identified by NSN 2930-01-566-8452 and part number 87719313 from CNH INDUSTRIAL AMERICA LLC, issued under solicitation SPE7L1-26-T-943Y. Delivery is required within ten days of contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged in compliance with ASTM D3951, with all packaging and labeling adhering strictly to MIL-STD-129, superseded where necessary by the DLA Master List of Technical and Quality Requirements. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized by specification. Packaging must be palletized per RP001 requirements and marked with the designated unit of issue and quantity per unit pack. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated US Army facility at Fort Bliss, Texas, with the RDD 555 shipment code and project identifier TP 2. The freight and mark-for addresses are identical, and the contract includes a government-use-only designation with specific distribution and control codes. The original required delivery date is August 5, 2026, with a response deadline for the solicitation set for August 20, 2026. The contracting officer is Kristina Derry of the Department of Defense’s Land Supply Chain, and all technical and quality standards referenced via R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. Unit of issue is each, and the contract enforces full compliance with DoD procurement protocols, including the handling of covered defense information.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE4A5-26-T-336S
The contract is for the supply of 145 units of an O-RING with NSN 5331016997328 and part number 68-1452 under solicitation SPE4A5-26-T-336S, issued by the Department of Defense through the ASC Supplier Oper OEM Division. The item must be delivered FOB origin within 122 days of contract award, with no variance allowed in quantity, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1 using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331. All packaging, marking, and preservation must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 20-20 prohibiting bending. Mercury and mercury compounds are strictly prohibited in any preservation or packaging materials. Palletization and packaging follow DLA’s RP001 requirements, and transportation instructions are governed by DLAD proc notes C19 and C20. The delivery destination is Hill AFB, Utah, with a required ship date of December 18, 2026, and an original delivery deadline of June 8, 2027. Technical and quality standards referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award date as applicable. Unit of issue is each (EA) at a unit price of $145.00, totaling $21,025.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336310
New
DIBBS
CAPASSEMBLY
Solicitation # SPE7L4-26-U-1075
This contract, issued under solicitation SPE7L4-26-U-1075, is a total small business set-aside for the procurement of one item identified by NSN 2910-01-485-7711 and part number 75290-01, with an estimated quantity of 149 units at a unit price of $149.00, totaling $22,201. The contract mandates strict adherence to DLA Packaging Requirements for Procurement, including compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with all DLA Master List of Technical and Quality Requirements taking precedence. Delivery is required FOB origin within 74 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The unit of issue is each, and palletization must conform to DLA standards. The item is covered under DLA Direct, CONUS, and is subject to all applicable federal acquisition regulations. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and is managed by the Department of Defense’s LSO Combat Vehicles and Armament under NAICS code 336310, with primary point of contact Heather Kessler available for inquiries.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
BOWL, SEDIMENT
Solicitation # SPE7LX-26-U-9362
This contract pertains to the procurement of a BOWL, SEDIMENT with NSN 2910-01-687-9089 and part number 20771574, issued under solicitation SPE7LX-26-U-9362 as a total small business set-aside. The contractor is required to deliver 55 units, each at a unit price of $55.00, for a total price of $3,025.00, with delivery due within 74 days from award and FOB origin. The item must be shipped with no variance in quantity—neither plus nor minus—and inspected at the destination point. DLA packaging standards take precedence over all others, requiring compliance with ASTM D3951 and mandatory adherence to MIL-STD-129 for marking and labeling, with palletization governed by the DLA Packaging Requirements for Procurement. All packaging and unit of issue must reflect the contract’s specified quantity per unit pack, and no government identification may be removed from non-accepted supplies. Ozone-depleting chemicals are strictly prohibited in the manufacture or packaging of this item, and any substitutes require pre-approval unless explicitly authorized by the specification. The technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Delivery is directed via DLA Direct within the Continental United States, and the unit of issue is each (EA), consistent with DoD and ANSI X12 standards.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
PUMP, FUEL, ELECTRICA
Solicitation # SPE7L4-26-U-1074
The contract is for the supply of a fuel pump, electric, identified by NSN 2910-01-659-4288 and part number C574-1900, with a quantity of 17 units to be delivered FOB origin within 74 days. All items must comply with DLA’s technical and quality requirements as specified in the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification standards; approved substitute chemicals must be submitted for review. Packaging must meet MIL-STD-2073-1E and MIL-STD-129 standards, with specific labeling, container types, and palletization per DLA packaging directives. The unit of issue is each, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. The contract is a direct DLA acquisition, CONUS delivery, with a unit price of $17.00 and a total price of $289.00, issued under solicitation SPE7L4-26-U-1074, with a response deadline of August 24, 2026. The NAICS code is 336310, and the contracting activity falls under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with Heather Kessler listed as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
TANK, FUEL, ENGINE
Solicitation # SPE7L3-26-T-169B
The contract pertains to the procurement of one fuel tank for an engine, identified by NSN 2910-01-558-3643, under solicitation SPE7L3-26-T-169B. The item must be delivered within five days of award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence and must be followed. All packaging and labeling must adhere to MIL-STD-129, and palletization must meet DLA’s packaging requirements. The unit of issue is one each, and the contract specifies the required shipping and delivery addresses, including a designated freight shipping location in Yermo, California, and a parcel post address in Barstow, California. Shipping must be accomplished by the fastest traceable means, explicitly prohibiting parcel post. The required delivery date is August 7, 2026, and the contract includes specific government use codes, control identifiers, and a point of contact for inquiries. Technical and quality specifications referenced are governed by the DLA Master List, with revision control tied to the solicitation issue or award date depending on acquisition size.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
QUIET VENT ASSEMBLY
Solicitation # SPE7MC-26-T-186U
The contract pertains to the procurement of six Quiet Vent Assemblies with NSN 4820-01-524-4456 and part number S3C10061-01, supplied by VACCO Industries, under solicitation SPE7MC-26-T-186U. Delivery is required within 165 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The quantity is fixed with zero variance allowed. All supplies must comply with DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific packaging methods, containment types, and marking standards per MIL-STD-129. No special marking is required. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, sensors, or weapon systems specified by NAVSEA, with additional requirements for secondary containment and shock resistance for portable devices. Packaging must be palletized per DLA standards and shipped to the designated receipt warehouse in Tracy, California. The unit price is $6.00 per unit, totaling a contract value of $36.00. The requirement is subject to the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The point of contact is Paula McClary, and the solicitation closed on August 20, 2026, with an original delivery need date of February 2, 2027, and an overall required delivery date of November 26, 2027.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
DUMP VALVE
Solicitation # SPE7MC-26-T-186D
The contract is for the procurement of two dump valves with NSN 4820-01-117-0527 and part number 99098-38, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-186D. Delivery is required within 20 days of award, with shipment FOB origin and no tolerance for quantity variance. All items must be packaged in compliance with ASTM D3951, subject to the overriding requirements of the DLA Master List of Technical and Quality Requirements, and labeled and marked according to MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement, and transport must be via traceable means—parcel post is prohibited. The delivery destination is Fort Eustis, Virginia, with the freight shipping and mark-for address identical. The required delivery date is August 5, 2026, and the purchase request number is 7017784162. The unit price is $2.00 per unit, totaling $4.00. The contract mandates that government identification be removed from any non-accepted supplies and specifies the point of inspection and acceptance as the destination. Contact for inquiries is Paula McClary at fmda3302@dla.mil or 614-692-0417.
Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
GLOW PLUG
Solicitation # SPE7L1-26-T-947N
This contract specifies the procurement of 30 glow plugs under NSN 2920-12-342-2744 with a unit price of $30.00, totaling $900.00, to be delivered within 20 days FOB origin with no variance in quantity permitted. The items must comply with rigorous technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and are classified as critical application items suitable for military use. The products must not contain any Class I ozone-depleting chemicals, and any substitute materials require prior approval despite existing specification provisions. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific codes for preservation, wrapping, and unit containment, and palletization must meet DLA’s packaging requirements. The supplier must ensure markings comply with standards and the special marking code indicates no additional requirements. Delivery is directed to the Lithuanian Armed Forces’ logistics depot in Kaunas, Lithuania, via the designated freight forwarder DSV Air & Sea Inc. in Carteret, New Jersey. The contract is issued under solicitation SPE7L1-26-T-947N, with a required delivery date of February 5, 2025, and the items are intended for government use under specific program and distribution codes. Approved manufacturer part numbers include those from MTU Friedrichshafen GmbH, Federal-Mogul Friedberg GmbH, Penn Power Group LLC, and Daimler Truck AG, all meeting the referenced technical criteria.
LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
SHROUD, FAN, RADIATOR
Solicitation # SPE7L3-26-T-169E
The contract pertains to the procurement of one unit of a SHROUD, FAN, RADIATOR with NSN 2930-01-602-8008 under solicitation SPE7L3-26-T-169E, requiring delivery within five days of award at FOB origin. All items must strictly comply with DLA’s packaging standards, including ANSI X12 unit of issue, MIL-STD-129 labeling, ASTM D3951 packaging, and palletization per RP001, with DLA’s Master List of Technical and Quality Requirements overriding any conflicting standards. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitutes require prior approval unless already authorized by specification. The delivery is directed to DLA Distribution Management Office in Yermo, CA, with a required delivery date of August 7, 2026, and must be shipped via traceable freight—parcel post is forbidden. Inspection and acceptance occur at destination with no variance allowed in quantity. Packaging must clearly indicate the Unit of Issue and Quantity per Unit Pack as specified, and all markings must adhere to government requirements. The contract references external DLA technical documents and requires compliance with their latest versions effective at the time of solicitation or award.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details