Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE4A5-26-T-308QFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 179 flat washers with NSN 5310-01-617-4324, identified as a critical application item for Meggitt Aircraft Braking Systems, part number 5010744. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlling based on the solicitation or award date depending on acquisition size. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per criticality. The item has no shelf life requirement and is not subject to Item Unique Identification per DFARS 252.211-7003(c)(1)(i). Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization according to DLA packaging requirements. All packaging and unit of issue details align with the contract’s specified QUP 001, and DLA Master List provisions override any conflicting standards. The delivery is FOB origin, with inspection and acceptance also at origin, and no quantity variance is permitted. The required delivery date is April 16, 2027, with a need ship date of December 13, 2026, and delivery must occur within 131 days. The destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The contract number is SPE4A5-26-T-308Q, issued under NAICS code 332722 by the Department of Defense’s ASC Supplier OEM Division, with point of contact Courtney Minor.

General Info

Solicitation for 179 flat washers NSN 5310-01-617-4324 via DIBBS by DLA, response due August 3, 2026

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-308Q.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Courtney Minor
contact@example.gov

Full Description

Show more
WASHER,FLAT
WASHER,FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
MEGGITT AIRCRAFT BRAKING SYSTEMS 0B9R9 P/N 5010744
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-308Q
SECTION B
PR: 7017199931 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017199931 0001 EA 179.000
NSN/MATERIAL:5310016174324
DELIVERY (IN DAYS):0131
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:12/13/2026 Original Required Delivery Date:04/16/2027
SPE4A5-26-T-308Q NSN/Part Number: 5310-01-617-4324 Quantity: 179 EA Purchase Request: 7017199931QTY: 179 Delivery: 131 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, CAThe contract is for 29 self-locking cap nuts identified by NSN 5310-01-442-7733 under solicitation SPE4A5-26-T-309E, with a response deadline of August 3, 2026, and a delivery requirement of 20 days after order placement. The item is subject to strict export controls under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons, including foreign nationals within the United States or overseas, requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on proper handling of DOD export-controlled data, and approved access via the DLA questionnaire are permitted to receive it. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION, with performance located in Bremerton, Washington, and primary point of contact is Patrick Oconnor, reachable via email and phone provided. The NAICS code is 332722, indicating the procurement falls under the manufacturing sector for screw, nut, bolt, and other fastener manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
O-RINGThe contract calls for a single O-ring, part number 27293 with NSN 5331-01-277-0923, supplied by DAVEY COMPRESSOR CO of Cincinnati, OH, under FSCM 16004. The item must comply with DLA Packaging Requirements for Procurement and incorporate all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The specification explicitly prohibits the use of asbestos as defined in FED-STD-313, and government identification must be removed from any non-accepted supplies. The delivery requirement is five days after award, and the purchase request number is 7017607379. The solicitation number is SPE7L1-26-T-876M, posted on July 26, 2026, with a response deadline of August 6, 2026, under NAICS code 332722 for mechanical seal manufacturing. The contracting agency is the Department of Defense, specifically the Land Supply Chain, with performance occurring at FPO, ZIP 96349. Primary point of contact is Kristina Derry, reachable via email and phone provided, and the solicitation is accessible through the DIBBS website.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract specifies the procurement of 20 units of a hexagon cap screw, identified by NSN 5305-01-657-6697 and McMaster-Carr part number 92965A581, under solicitation SPE4A6-26-T-09RJ. Delivery is required within five days of award, FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 33, dry climate control, and unit packaging coded as BV with intermediate container E5; marking must follow MIL-STD-129 with no special marking required. The product must be palletized per DLA packaging requirements, and shipping must use the fastest traceable means, excluding parcel post. The delivery address is Bldg 810 Dive Locker in Birmingham, AL, with a mandatory government use designation and specific tracking identifiers. The technical and quality requirements referenced throughout the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The contract enforces strict compliance with DoD unit of issue standards and incorporates additional requirements including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Dana Barefoot, and the solicitation response deadline is August 3, 2026, with an original required delivery date of July 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract pertains to the procurement of machine screws identified by part number JWA82272 and NSN 5305-01-616-2120, with a unit of issue defined as a package containing 31 screws. A total of 39 packages are required, to be delivered FOB origin within 111 days, with no tolerance for quantity variance. Acceptance and inspection both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container details. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. The screws must not contain or come into direct contact with mercury or mercury compounds except for specified functional uses such as batteries, lighting, sensors, or naval instrumentation, with additional containment requirements for portable devices. Sampling and quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with attributes assigned strict acceptance levels unless otherwise indicated. Documentation for source approval, removal of government identification from non-accepted items, and material compliance are all governed by referenced DLA master requirements. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for November 23, 2026, under solicitation SPE4A6-26-T-09SG.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract specifies the procurement of a single screw cap, socket head, identified by NSN 5305-01-560-8136 and part number MS16995-82S316, manufactured in compliance with the current revision of the applicable military or consensus industry standard, with past revisions still acceptable for previously produced items. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and take precedence over other standards like ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with all items palletized per RP001 guidelines, and labeling must follow these standards strictly. Sampling is mandated under MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stated, and attributes are assigned specific verification levels or AQLs. The item is not subject to shelf life restrictions and does not require Unique Item Identification. Delivery is due within five days of award, FOB origin, with inspection and acceptance occurring at the destination. Shipment must be sent via the fastest traceable method, excluding parcel post, to the specified Norfolk Naval Shipyard address in Portsmouth, Virginia. The contract is under solicitation SPE4A0-26-T-4052 with a required delivery date of July 6, 2026, and contains mandatory compliance clauses including identification of covered defense information and adherence to DoD unit of issue standards.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEADThe item specified is a screw, cap, socket head with NSN 5305-01-661-9915, quantity of 20 units, under purchase request 7017574132, with a delivery requirement of 20 days ADO. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless amended. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting any export or disclosure to foreign persons, including those within the United States, without prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD export control training and the DLA questionnaire. The solicitation number is SPE4A6-26-T-09PN, posted on July 26, 2026, with a response deadline of August 3, 2026, and the place of performance is Groton, Connecticut, 06349-5300, under the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEThis contract is for the procurement of 104 self-locking hexagon nuts with NSN 5310-00-582-8201 and part number 197125 from Honeywell International Inc, designated as a critical application item. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and DLA-specific packaging directives under RP001, and all items must be marked and labeled in accordance with physical identification standards. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is subject to strict inspection and acceptance at destination, with no quantity variance permitted. Delivery is required FOB origin within 169 days of contract award, with a need ship date of January 20, 2027 and an original required delivery date of January 20, 2028. Packaging and shipping details are to follow specified DLA procedures, with delivery directed to the DLA distribution facility in New Cumberland, Pennsylvania. The solicitation is issued under contract number SPE4A6-26-T-09PB, and proprietary or insufficient technical data renders competitive procurement challenging.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
CONTACT, ELECTRICALThe contract specifies the procurement of three electrical contacts, part number 790-1613-001, with NSN 5999-01-194-1648, under solicitation SPE4A5-26-T-309L. Delivery is required within 20 days to the USS Massachusetts (SSN 798) at FPO AE 09592-7400, with FOB destination terms, zero variance in quantity, and final inspection and acceptance occurring at the delivery point. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951; packaging must follow MIL-STD-129 and RP001, with hazardous materials processed per TQ requirement IP025 and non-hazardous items packed commercially in accordance with applicable DLA directives. Sampling and inspection adhere strictly to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Measuring and test equipment used must meet RT001 standards, and documentation for source approval must satisfy RC001. Shipping must be traceable, prohibiting parcel post, and must reference the provided VSM code and TCN. The required delivery date is July 17, 2026, and the contract is managed under the Department of Defense with point of contact Francis Polakiewicz.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
SEAL, RING METALLICThe contract pertains to the procurement of four metallic ring seals, identified by NSN 5330-00-340-4318 and part number 3005G79PC1, under solicitation SPE4A5-26-T-308V, issued by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 61 days after award, with responses due by August 3, 2026. The item is governed by DLA packaging and technical quality requirements referenced from the official DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition scale. Strict prohibitions are in place against the intentional use of mercury or mercury-containing compounds in or contacting the hardware, with narrow exceptions for specific functional items such as batteries, fluorescent lights, instrumentation, weapon systems, and authorized chemical reagents. Portable devices containing mercury must include shockproof casing and a secondary containment barrier per NAVSEA 5100-003D. Asbestos, as defined in FED-STD-313, is entirely banned. The point of contact for inquiries is Katelane Dillard, with an email and phone provided for coordination. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER ASSEMBLY, DETECThe contract pertains to the procurement of an Adapter Assembly, Detector Humidity, identified as a commercial item with part number 23069935 and NSN 4730-01-329-2599, with a quantity of 11 units to be delivered FOB origin within 249 days of contract award, targeting a required delivery date of October 14, 2026, with a need ship date of April 10, 2027. The unit price is $11.00 per unit, totaling $121.00, and the contract enforces strict compliance with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, with no special markings required. All packaging, preservation, and marking must avoid mercury or mercury-containing compounds, and the item must be palletized according to DLA’s procedural requirements. Sampling and inspection are governed by MIL-STD-1916 or ASQ Z1.4 with zero non-conformances accepted unless otherwise specified, and critical attributes must meet验收 levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The supplier must adhere to rigorous quality and configuration management standards including requirements for engineering change proposals, deviations, and waivers under RQ002, while technical and quality specifications are linked to the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Mercury-containing components are strictly prohibited except for specific functional exceptions like certain batteries, instrumentation, or weapon systems as defined by NAVSEA, and any such items must include secondary containment and be shockproof. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols follow DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A5-26-T-309G, which was posted on July 26, 2026, with responses due by August 3, 2026, and is administered under NAICS code 332996 by the Department of Defense’s ASC Supplier Operations OEM Division.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SHACKLEThe contract pertains to the procurement of 400 shackles identified by NSN 4030-01-197-2334, with the solicitation number SPE4A5-26-T-308N, issued under a Total Small Business Set-Aside as defined by FAR 19.5. The requirement is for a critical application item, with approved parts from Oshkosh Defense LLC and Columbus McKinnon Corporation, but no approved technical data package exists, rendering the procurement non-competitive due to proprietary or insufficient technical data. Deliveries are divided across three CLINs totaling 400 units—200, 30, and 170 units respectively—with a firm fixed price of $0.00 per unit and total price of $0.00, indicating a no-cost or administrative entry, while delivery is due 169 days after award. All items must be delivered FOB origin with zero variance in quantity, inspected and accepted at destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s packaging requirements. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise specified. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements for all referenced technical and quality standards. Delivery destinations are distributed to DLA depots in Tracy, CA; Hill AFB, UT; and Robins AFB, GA, with a requirement to ship no later than January 20, 2027, and original delivery deadlines between January 30 and February 14, 2027. The NAICS code is 332999 and the point of contact is Hien-Van Trinh of the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
HOOK, SLIPThis contract specifies the procurement of a TANDEMLOC INC 65059 part number Q2500AA-400-5, identified by NSN 4030-01-685-7504, with a quantity of 13 units to be delivered FOB origin within 126 days after the award date. The item is classified as a commercial off-the-shelf (COTS) product with no shelf life requirement and has been reviewed and determined non-hazardous under the HMIC code system, eliminating the need for a Safety Data Sheet package. Unit identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Inspection and acceptance occur at destination, with no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, and palletization follows DLA packaging requirements. Sampling inspections must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise stipulated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Documentation requirements for source approval are governed by RC001, and covered defense information may apply under RD003. Delivery is directed to the DLA Distribution San Joaquin warehouse in Tracy, California, with the original required delivery date of October 14, 2026, and a needed ship date of December 8, 2026. The unit price is $13.00 per each, totaling $169.00, and the contract is issued under solicitation SPE4A5-26-T-309H with technical and quality requirements incorporated by reference from the DLA Master List.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
TABLE, TILTING, GYROThe contract pertains to the procurement of two tilting gyro tables, identified by NSN 4920-01-718-1334 and part number 930-100-001, under solicitation SPE4A5-26-T-308L. Delivery is required within 20 days of contract award, with goods to be shipped FOB origin and inspected and accepted at the destination. Strict compliance with DLA’s Master List of Technical and Quality Requirements governs all specifications, superseding other standards like ASTM D3951 when conflicting. Packaging must adhere to MIL-STD-129 and RP001 packaging guidelines, with all items marked in accordance with physical identification requirements and government identification removed from non-accepted supplies. Sampling and inspection follow zero-defect acceptance rules under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Cybersecurity compliance at CMMC Level 2 is required, and the contractor must complete a self-assessment. Shipping must be via traceable freight—not parcel post—to the designated Tinker AFB location, with a strict quantity variance of plus or minus zero percent. The contract mandates use of the DoD unit of issue and references official DLA resources for unit conversion. Contract data includes the primary point of contact, Hien-Van Trinh, and specifies the original required delivery date of July 20, 2026, with a posted date of July 26, 2026, indicating a forward-looking procurement timeline.
Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SHAFT ASSY FLEXThe contract pertains to the procurement of a Shaft Assembly Flex with part number 491F1200303-001 and NSN 4920015344506, quantity of seven units, to be delivered FOB origin within 167 days of the contract award, with a required delivery date of August 8, 2027. The item is classified as a Commercial Off the Shelf (COTS) product and is subject to Item Unique Identification (IUID) compliance per MIL-STD-130 and DFARS 252.211-7003. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with palletization conforming to specified guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively. Documentation for source approval and covered defense information applies. Delivery is to be made to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with inspection and acceptance occurring at the destination. The unit of issue is each, with no variance allowed in quantity, and the contract is issued under solicitation SPE4A5-26-T-308S with a response deadline of August 3, 2026.
Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
TUBE, TORQUE, BRAKEThe contract pertains to the procurement of a Tube, Torque, Brake with part number 5001152 and 5001152-1, supplied by MEGGITT AIRCRAFT BRAKING SYSTEMS, under solicitation SPE4A5-26-T-309B. Ten units are required at a unit price of $10.00, with delivery due in 213 days FOB origin to the designated destination in Tracy, California. The item is classified as a Critical Application Item, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with hazardous materials following Fed-Std-313 and TQ requirement IP025, while non-hazardous items must be commercially packaged in accordance with ASTM D3951 unless overridden by DLA requirements. Item Unique Identification is not mandated per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must adhere to MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal Engineering Change Proposal or variance requests, and the supplier must perform a CMMC Level 2 Self-Assessment as mandated. The contract enforces strict inspection and acceptance at destination, with no tolerance for quantity variance. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20. The solicitation was issued on July 26, 2026, with responses due by August 3, 2026, and the NAICS code is 336413 for Aircraft Engine and Engine Parts Manufacturing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CYLINDER SLEEVEThe contract pertains to the procurement of 133 Cylinder Sleeves identified by NSN 1650-01-616-9605 and part number 90008679, manufactured by Meggitt Aircraft Braking Systems, under solicitation SPE4A5-26-T-308T. The item is classified as a commercial item and is critical to aircraft landing gear systems, requiring strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Compliance with MIL-STD-129 for marking and packaging is mandatory, and all packaging must adhere to DLA packaging requirements and palletization standards. Sampling must follow MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes defined by verification levels VII, IV, and II or acceptable quality levels of 0.1, 1.0, and 4.0 respectively. All deviations from engineering drawings require Material Review Board approval prior to shipment, and the contractor must certify full compliance with all referenced manuals and standards prior to award. The item is subject to Cybersecurity Maturity Model Certification Level 2 self-assessment and must be marked per physical identification requirements, though Unique Item Identification is waived by the Service customer. Delivery is FOB origin with zero tolerance for quantity variance, inspected and accepted at destination, and must be delivered within 96 days to Tinker AFB, Oklahoma, with a required delivery date of April 7, 2027. The unit price is $133.00, totaling $17,689.00, and transportation logistics must comply with DLA procedural notes C19 and C20.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SCISSORS ASSY, MAINThe contract pertains to the procurement of six units of the SCISSORS ASSY, MAIN, with a unit price of $6.00 and a total contract value of $36.00, under solicitation SPE4A5-26-T-308R, which is a Total Small Business Set-Aside. Delivery is required within 63 days of award, with shipment FOB origin and final inspection and acceptance at the destination located at the DLA Distribution facility in New Cumberland, Pennsylvania. The item must comply with stringent technical and quality standards referenced from the DLA Master List, including MIL-STD-130 for Item Unique Identification (IUID), MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Packaging must adhere to DLA-specific requirements and be palletized according to RP001, with no special marking required. The contractor is subject to tailored and non-tailored higher-level quality requirements, including ISO 9001:2015, and must meet cybersecurity certification at CMMC Level 2 through self-assessment. Sampling for quality verification follows MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances mandated unless otherwise specified. The item is subject to DFARS 252.211-7003 for IUID compliance and requires removal of government identification from non-accepted supplies. The procurement is managed by the Department of Defense, with Hannah Song as the primary point of contact, and the North American Industry Classification System code 336413 applies. The original required delivery date is October 14, 2027, with a need ship date of July 2, 2029.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, SELF-INDICThe contract specifies the procurement of 31 self-indicating bimetallic thermometers under NSN 6685-01-417-6054 from Moeller Instrument Company, Inc., with part numbers 100417 and ITD32404-S, delivered FOB origin within 169 days of the contract award. The thermometers are designated as critical application items and must meet stringent packaging, marking, and inspection standards per MIL-STD-2073-1E and MIL-STD-129, including special marking code 05 for delicate instruments. Packaging must comply with DLA procurement requirements and prohibit any mercury or mercury compounds in preservation, packaging, or materials, except for functional uses in batteries, fluorescent lights, or specific instruments regulated by NAVSEA, which must include a secondary containment. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1 with zero non-conformances required unless otherwise stated, and critical attributes are held to the highest verification level. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced on the DLA website, with revisions effective as of the solicitation or award date. Delivery is to the DDSP New Cumberland facility in Pennsylvania, and shipment must adhere to DLA transport protocols. The contract was solicited under SPE4A5-26-T-308K with a response deadline of August 3, 2026, and the primary point of contact is Leon Watson of the Department of Defense.
Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 7 days
View Details