Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE4A6-26-T-07FAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of six flat washers with NSN 5310-01-652-1942 and part number 108329 supplied by AQUALUNG USA, INC, under solicitation SPE4A6-26-T-07FA. Delivery is required FOB origin within 220 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination warehouse in Tracy, CA. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must follow MIL-STD-129 and RP001 DLA Packaging Requirements, including palletization. Mercury or mercury-containing compounds are prohibited unless specifically exempted for functional components such as batteries, fluorescent lights, or weapon systems, and any portable devices containing mercury must have a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling for quality assurance must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Unit of issue is each, and item unique identification is not required per customer request. The contract specifies no shelf life and mandates that government identification be removed from non-accepted supplies. The original required delivery date was October 14, 2026, with a need ship date of March 2, 2027, and all transportation references must follow DLAD Proc Note C19 and C20.

General Info

Six flat washers procured from AQUALUNG USA, INC, FOB origin, compliant with DLA standards, delivered to Tracy, CA by March 2, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07FA DLA Aviation Jul 17 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
BERNICE ADAMS
contact@example.gov

Full Description

Show more
WASHER,FLAT
WASHER<(>,<)> FLAT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
AQUALUNG USA, INC 94120 P/N 108329
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A6-26-T-07FA
SECTION B
PR: 7017529381 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017529381 0001 EA 6.000
NSN/MATERIAL:5310016521942
DELIVERY (IN DAYS):0220
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/02/2027 Original Required Delivery Date:10/14/2026
SPE4A6-26-T-07FA
SECTION B
PR: 7017529381 PRLI: 0001 CONT’D
SPE4A6-26-T-07FA NSN/Part Number: 5310-01-652-1942 Quantity: 6 EA Purchase Request: 7017529381QTY: 6 Delivery: 220 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in 34 minutes

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThis contract specifies the procurement of a close tolerance screw with NSN 5305-01-209-9377 and part number BACB30NT3K4, designated as a commercial item under DLA procurement guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RQ011, RQ017, RC001, and others, which outline packaging, identification, documentation, and configuration control standards. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are verified at stringent levels. The item is flagged as a critical application requiring compliance with CMMC Level 2 self-assessment and proprietary data protections, with configuration changes needing engineering change proposals. Only approved suppliers including Boeing, Howmet, Huck International, and others are qualified to manufacture this part, which may require specialized casting or forging tooling—sourcing assistance must be requested through DLA’s forging and casting portal. The contract includes two delivery lines: 149 units to be shipped to Cherry Point, NC, and 457 units to San Diego, CA, both under the same part number and purchase request. Delivery is FOB origin with zero tolerance for quantity variance, inspection and acceptance occurring at the destination. Packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and container requirements, and marking must comply with MIL-STD-129 without special identifiers. Palletization follows DLA packaging standards, and transportation is governed by DLAD procedural notes. The required delivery date is January 22, 2027, with shipping due by April 22, 2026, for Cherry Point and July 14, 2027, for San Diego. Unit pricing is $149 and $457 respectively, totaling a consolidated value based on 606 units total, with full compliance mandated under solicitation SPE4A6-26-T-07JZ issued by the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 35 units of a socket head cap screw identified by NSN 5305-01-617-5060 and part number 15666156-3 under solicitation SPE4A6-26-T-04CP. Delivery is required within 171 days of award, with a specified need ship date of January 3, 2027, and an original required delivery date of November 16, 2026. Goods must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Palletization and preservation methods must meet DLA packaging requirements, explicitly prohibiting mercury or mercury compounds in any packaging materials. The contract incorporates technical and quality requirements from the DLA Master List, and sampling procedures follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. The item is subject to DLA’s unit of issue standards and defense information handling rules, with final delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. This solicitation is a federal procurement under NAICS code 332722, managed by the Department of Defense’s ASC Commodities Division, with Xavier Keyes as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCEThe contract is for two close-tolerance screws identified by NSN 5305-01-384-3422, with a delivery requirement of 135 days after award. The solicitation number is SPE4A6-26-T-07CK, issued by the ASC Commodities Division under the Department of Defense, with a response deadline of July 24, 2026. The item falls under NAICS code 332722 and is being procured by the federal government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R or I numbers, with the controlling revision based on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. Physical identification of the screws must adhere to RQ017 requirements, and non-accepted supplies must have government identification removed. The supplier data identifies Jesco America Corp in Rochester, NY, and the point of contact is Charece Smith, with performance taking place in Tracy, CA, ZIP 95304-5000.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of a mounting bracket with part number MC47 and NSN 5340-01-549-2023, for a quantity of eight units, to be delivered within 149 days after order. The supplier is LEX PRODUCTS CORP located in Shelton, CT, and the item must comply with MIL-STD-130N standards for identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on acquisition size. All supplies must be marked in accordance with federal regulations, and government identification must be removed from any non-accepted items. The solicitation number is SPE7L1-26-T-846A, issued on July 16, 2026, with responses due by July 27, 2026, under NAICS code 332722. Performance is to occur in Tracy, CA, 95304-5000, and inquiries should be directed to Michael Nordahl at the provided DLA contact information.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details