Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, FLAT

Active
SPE4A6-26-T-25NNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-26-T-25NN, issued by the DLA Aviation ASC Commodities Division, is for the procurement of 2,500 flat washers under NSN 5310-01-414-7519. The requirement specifies a need ship date of October 31, 2026, with delivery to DLA Distribution Red River in Texarkana, Texas. The contract is established as FOB Destination Other, and both inspection and acceptance are to occur at the origin. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Technical and quality requirements are governed by the DLA Master List, which takes precedence over general packaging standards. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and cybersecurity reporting under DFARS 252.204-7012. Quotes must be submitted via the DIBBS portal by September 9, 2026.

General Info

DoD procurement of 2,500 flat washers for delivery to Texarkana by September 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, USA

Set-Aside

NONE

Documents

(1)

SPEA46-26-T-25NN Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Alison Allen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER,FLAT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
ADEQUATE DATA FOR NSN/Part Number: 5310-01-414-7519 Quantity: 2,500 EA Purchase Request: 7018068348QTY: 2500 Delivery: 51 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A7-26-R-0740
This contract is for an indefinite quantity, fixed-price agreement to supply NSN 5305-01-057-3757, a close tolerance screw used in F-15 Eagle aircraft, designated as a critical application item. The requirement is exclusively set aside for small businesses through full and open competition after excluding non-small business sources. The base performance period is five years with no options, and annual demand is estimated at 200 pouches, with each delivery order ranging between a minimum of 50 pouches and a maximum of 200 pouches. Production units must be delivered within 549 days, with shipments going to CONUS stock locations as specified on individual delivery orders under FOB Destination terms, including mandatory inspection at origin for DLA Direct requirements. Surge requirements do not apply. The contract will be awarded based on best value criteria, combining price, past performance, and other evaluation factors outlined in the solicitation. A reverse auction may be conducted through the Procurex platform, requiring suppliers to self-register at dla.procurexinc.com to participate. The solicitation, issued under number SPE4A726R0740 and posted on August 10, 2026, must be completed in full by offerors to be eligible for award, with responses due by September 21, 2026. All documents are available exclusively via the DIBBS Internet Bid Board System, and no paper copies will be provided. The contracting office is DLA Aviation in Richmond, Virginia, with Xuan Thanh Phan listed as the primary point of contact for inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
SLED
F1554 Galvanized Anchor Bolt Supply
Mobility

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
Federal
53--SCREW,CAP,HEXAGON H
Solicitation # N0010426QYAHW
This solicitation is for the manufacture of modified hexagon head screws for use on Navy submarines, specifically requiring the use of MP35N material per SAE-AMS-5845 and Drawing 6853520. The procurement is a small business set-aside and will be awarded based on best value, evaluating both price and past performance. Key technical requirements include strict adherence to mercury-free standards, specific marking and identification per MIL-STD-130, and compliance with quality systems such as ISO 9001 or MIL-I-45208. The contractor is responsible for comprehensive quality assurance, including 100 percent visual and dimensional inspection of production lots and the submission of various certifications for material, heat treatment, and mercury exclusion. Final inspection and acceptance will be conducted by the cognizant DCMA-QAR, with the Naval Surface Warfare Center, Philadelphia Division serving as the acceptance activity for required data items. All contractual documents are considered issued upon electronic transmission, and the government reserves the right to perform additional inspections to ensure conformity.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
International
Multiple Victoria-Class Spares : SCREW, MACHINE, BALL, JACK,SCREW,HAND, SCREW,CAP, SOCKET HEAD and WATER TESTING KIT,CHEMICAL AGENTS
Solicitation # W8482-275379/A
The Department of National Defence is soliciting bids for various Victoria-Class spares to be delivered to CFB Esquimalt and CFB Halifax. The required items include machine screws, balls, a hand screw jack, socket head cap screws, and chemical agent water testing kits. Quantities vary by item and destination, with specific part numbers and NCAGE codes provided for each requirement. This procurement is subject to the Controlled Goods Program under the Defence Production Act and Canada's Export Control List. Bidders offering equivalent or substitute products must provide the brand name, model or part number, and the NCAGE. The solicitation is open for responses until October 13, 2026, and documents may be submitted in either official language of Canada.
Department of National Defence

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
Supply of Machine Bolts (NSN 5306004278710)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Socket Head Cap Screws (NSN 5305016916726)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 2,000 Socket Head Cap Screws conforming to NSN 5305016916726 specifications. The selected provider is responsible for manufacturing or sourcing the screws, ensuring physical identification and bare item marking comply with RQ017 standards, and adhering to RQ001 DLA Packaging Requirements for Procurement. The contract falls under NAICS code 332722 and specifies a place of performance in Fort Worth, Texas. Interested parties must respond by September 11, 2026, to provide the properly marked and packaged units for DLA delivery.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Flat Washers (NSN 5310015973866)
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Straight Headless Pins (NSN 5315016284455)
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Ring Spacers (NSN 5365010546511)
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
Supply of Machine Bolts (NSN 5306015537136)
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Close Tolerance Screws (NSN 5305-01-196-5091)
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Supply of Hexagon Head Cap Screws (NSN 5305-00-702-9070)This subcontract involves the supply of specialized hexagon head cap screws meeting NSN 5305-00-702-9070 specifications for prime contractors supporting the Department of Defense ASC Commodities Division. The selected provider must be capable of manufacturing or sourcing these components while strictly adhering to RP001 packaging, RQ017 marking, and RQ006 quality conformance inspection standards. A valid CAGE code is required for participation. The contract is categorized under NAICS code 332722 and specifies the place of performance as Hill AFB in Utah. Interested parties must submit their responses by September 11, 2026, to ensure the delivery of physical hardware that complies with all DLA regulations.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335931
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-R-XD60
This solicitation, identified as SPE4A6-26-R-XD60 and issued by the Department of Defense ASC Commodities Division, seeks quotations for ten units of a wiring harness, NSN 5995-01-680-2478, part number 070647-0001 from Leonardo US Cyber and Security. The requirement is for a critical application item identified as a commercial product with no shelf life requirement. The contract will be awarded as a firm fixed price bilateral indefinite delivery purchase order with a total ceiling of 350,000 dollars over a five-year base period. Delivery is required within 118 days after order, with FOB origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Specific technical and quality requirements include the removal of government identification from non-accepted supplies per RQ011 and physical identification per RQ017. Surplus materials are explicitly deemed unacceptable for this national stock number. All submissions must be uploaded via DIBBS by the deadline of September 22, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 18 days
View Details
New
DIBBS
INSULATION SLEEVING
Solicitation # SPE4A6-26-R-XD59
This solicitation, identified as SPE4A6-26-R-XD59 and issued by the Department of Defense ASC Commodities Division, is for the procurement of electrical insulation sleeving under NSN 5970-01-508-5746. The requirement is for 17 rolls, with each roll consisting of 50 feet, specifically referencing Whitmor Plastic Wire and Cable Corp part number WZ102. This is a critical application item provided under a firm fixed price agreement with a delivery schedule of 150 days after receipt of order. The contract allows for no quantity variance and specifies that both the inspection and acceptance points are at the destination, with shipping terms set as FOB Origin. The procurement adheres to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for DLA packaging requirements. Sampling and quality assurance must comply with MIL-STD-1916 or ASQ H1331, utilizing specific verification levels for critical, major, and minor attributes. The solicitation was posted on September 4, 2026, with a response deadline of September 22, 2026. It is structured as an unrestricted solicitation for a bilateral award that may include a five-year base period with a total value cap of 350,000 dollars.

POSTED

about 14 hours ago

DEADLINE

in 18 days
View Details
NAICS: 335139
New
DIBBS
LIGHT, BACKUP
Solicitation # SPE4A6-26-R-XD62
This solicitation, identified as SPE4A6-26-R-XD62, is issued by the Department of Defense ASC Commodities Division for the procurement of 300 units of backup lights under NSN 6220-01-375-3530. The contract is a total small business set-aside and is intended to result in a bilateral indefinite delivery purchase order with a five-year base period and an aggregate value up to 350,000 dollars. The pricing is based on a firm fixed price with a delivery requirement of 190 days after order. The contract mandates strict adherence to various DLA technical and quality requirements, including ISO 9001:2015 standards, specific packaging and marking protocols per MIL-STD-129 and MIL-STD-2073-1E, and the use of qualified products lists. It specifies a prohibition on the intentional addition of mercury, except where functionally required and contained. Quality assurance is governed by sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. The technical data package is based on Revision B Generation 2, referencing multiple specific drawings and revisions.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWER, ELECTRICAL
Solicitation # SPE4A6-26-R-XD48
Solicitation SPE4A6-26-R-XD48, issued by the Department of Defense ASC Commodities Division on September 4, 2026, seeks quotes for 143 electrical power cable assemblies under NSN 6150-01-390-7058. This is a total small business set-aside under NAICS code 335931, structured as a bilateral award with an indefinite delivery purchase order for stock buys over a five year base period. The required delivery timeframe is 345 days after the order is placed. The contract contains strict export control requirements under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to DLA contractors with an approved US/Canada Joint Certification Program certification who have completed the required training and questionnaires. All shipments must adhere to DLA packaging requirements RP001.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-R-0275
This is a sole source set-aside for an SBA Certified Women-Owned Small Business to establish an Indefinite Quantity Contract for a specific cable assembly used in F-15 Eagle aircraft. The contract consists of a five-year base period with no additional options, featuring an estimated annual demand of 16 units and a required delivery timeframe of 313 days to facilities within the Continental United States. Only vendors proposing the approved sources of supply, Safran Electrical Components USA, Inc. or Jo-Kell Inc., will be considered. Due to the critical nature of the application, the item is subject to strict export controls under ITAR and EAR regulations. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and be authorized by the DLA controlling authority to access technical data. The procurement process may involve a reverse auction, and proposals must be submitted to the bid custodian rather than through the DIBBS system.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XD57
Contract SPE4A6-26-R-XD57 is a solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 10 special purpose electrical cable assemblies, identified by NSN 5995-01-530-3551 and Caton Connector Corporation part number 2CA30982-2L6. This firm fixed price acquisition is structured as a bilateral indefinite delivery purchase order for stock buys with a base period of five years and an aggregate contract value up to 350,000 dollars. Delivery is required within 95 days after order, with inspection and acceptance occurring at the destination and shipping handled as FOB origin. The contract mandates strict adherence to various technical and quality requirements, including DLA packaging standards, physical identification marking, and the removal of government identification from non-accepted supplies. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Additionally, the use of mercury or mercury-containing compounds is prohibited in the hardware and packaging, except where specifically allowed for functional components like batteries or sensors. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 18 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XD14
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-R-XD14, is for the procurement of 21 units of a special purpose branched electrical cable assembly, identified by NSN 6150-01-633-1590. The requirement is a total small business set-aside and will result in a bilateral indefinite delivery purchase order for stock buys with a five-year base period and an aggregate ceiling of 350,000 dollars. Delivery is required within 90 days after receipt of order. Due to the nature of the technical data, this contract is subject to strict export controls under the International Traffic in Arms Regulations and the Export Administration Regulations, as well as DFARS 252.225-7048. Access to this technical data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Interested parties must be registered in SAM and submit quotations by the deadline of September 22, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332912
New
DIBBS
MANIFOLD, PNEUMATIC SENSOR
Solicitation # SPE4A6-26-R-0294
This procurement solicitation is for the acquisition of 79 pneumatic manifolds intended for use in F-16 aircraft, identified by NSN 6610-011491465. The requirement is restricted to approved original equipment manufacturers Rosemount Aerospace Inc. and Honeywell International, Inc. This is an unrestricted procurement where the government intends to negotiate with these specific approved sources. The contract includes a mandatory Government First Article Test, with a production delivery schedule of 417 days after receipt of order. Terms of delivery are FOB Origin, and inspection and acceptance will also occur at the origin. The solicitation is expected to be issued on or about September 2, 2026, with a response deadline of October 2, 2026. Interested parties may submit proposals or express interest and capability within forty-five days of publication. Because the items involve restricted data, contractors must be certified by the DoD to access unclassified data via DD Form 2345. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Interested vendors can access the full solicitation through the DLA Internet Bid Board Systems.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335929
New
DIBBS
CABLE AND CONDUIT ASSEMBLY, ELECTRICAL
Solicitation # SPE4A6-26-R-XD58
This contract solicitation, identified as SPE4A6-26-R-XD58 and issued by the Department of Defense ASC Commodities Division, is for the procurement of ten electrical cable and conduit assemblies, specifically NSN 6150-01-475-7629 and Robertson Fuel Systems part number HM022-100-21. The requirement is for a critical application item under a firm fixed price agreement with a delivery timeline of 500 days after order. The procurement is intended to result in a bilateral indefinite delivery purchase order with a five year base period and an aggregate contract ceiling of 350,000 dollars. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standards MIL-STD-129. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. Inspection and acceptance will occur at the destination, while the shipping terms are FOB origin. Technical and quality requirements are governed by the DLA Master List, including specific provisions for the removal of government identification from non-accepted supplies and physical item marking.
Other Communication and Energy Wire Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 18 days
View Details
NAICS: 332312
New
DIBBS
Supply of Machine Bolts (NSN 5306013808029)This subcontract with the Department of Defense ASC Commodities Division involves the procurement or manufacture of 75 machine bolts meeting NSN 5306013808029 specifications. The supplier will provide these components to prime contractors on DLA supply contracts, with delivery managed via FOB Destination to Tobyhanna, Pennsylvania. To be eligible, providers must possess a valid UEI and CAGE code and ensure full compliance with all applicable FAR and DFARS clauses. The opportunity is categorized under NAICS code 332312, with a response deadline of September 11, 2026.
Fabricated Structural Metal Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details