This Solicitation opportunity from Department Of Defense was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WASHER, FLAT

Closed

SPE4A6-26-T-42W2Federal

Submission Closed05/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

NUT , SELF-LOCKING, PLThe contract involves the procurement of 27 self-locking nuts, identified by the National Stock Number 5310-00-283-4635. The solicitation, issued by the Department of Defense's Defense Logistics Agency, is designated under the number SPE4A6-26-T-92R0 and is intended for federal acquisition purposes. Key dates include the posting date of June 15, 2026, and a response deadline on June 23, 2026. This solicitation does not specify any set-aside type or NAICS code, indicating that it is open without particular preference for small businesses or other categories. The purchase request associated with this contract is numbered 7017149106. Although detailed location and point of contact information is absent, the contract is firmly anchored within federal procurement channels, with the Defense Logistics Agency serving as the contracting agency responsible for managing this acquisition.

Defense Logistics Agency

POSTED

DEADLINE

PIN-RIVETThe contract involves the procurement of 12 PIN-RIVETS with the National Stock Number 5320-01-696-1475. This solicitation is issued by the Defense Logistics Agency under the Department of Defense, identified by the solicitation number SPE4A6-26-T-92R4. The contract was posted on June 15, 2026, with a response deadline of June 23, 2026. The solicitation is classified as a federal contract, with no specified set-aside or NAICS code indicated. The procurement does not list a specific location for the place of performance or the agency’s office address, and there is no point of contact provided within the contract details. The contract remains open for responses through the DIBBS platform, highlighting the standardized federal purchasing procedures for acquiring these PIN-RIVETS.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the procurement of a single unit of a cap socket head screw identified by the National Stock Number 5305-01-721-0324. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-92J7. It was posted on June 15, 2026, with a response deadline set for June 23, 2026. This federal solicitation does not specify any set-aside status or NAICS code, and the place of performance details are unspecified. The contract involves a purchase request number 7017127215 for quantity one of the specified item. The contracting agency is a federal entity, ensuring adherence to government procurement regulations. Although specific contact details and office locations are not provided, the contract and related solicitation information can be accessed through the provided online link on the Defense Logistics Agency’s bidding portal.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the purchase of seven units of a socket head cap screw identified by the National Stock Number (NSN) 5305-01-283-4206. It is issued by the Defense Logistics Agency, a part of the Department of Defense, under the solicitation number SPE4A6-26-T-92P3. The solicitation was posted on June 15, 2026, with a response deadline set for June 23, 2026. This contract is categorized as a solicitation type and does not specify any type of set-aside or NAICS code. The place of performance and specific office address details are not provided. The procurement is managed within a federal organization framework, indicating a government acquisition focused on fulfilling defense-related hardware needs.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract involves the procurement of a single unit of a cap socket head screw, identified by the National Stock Number (NSN) 5305-01-684-3687. The solicitation, issued under the number SPE4A6-26-T-92L1, was posted on June 15, 2026, with a response deadline set for June 23, 2026. This solicitation is managed by the Defense Logistics Agency, a branch of the Department of Defense. The contract is a straightforward purchase request (7017127199) for one item, with no specified set-aside or NAICS code indicated, meaning it is open and not restricted to certain business types. The place of performance and specific office address details are unspecified. Interested parties can access the solicitation details and respond via the provided Defense Logistics Agency online portal.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

The contract calls for the procurement of 351 units of flat washers, identified under NSN 5310-01-064-1494 and commercial part numbers from Caterpillar Inc. and H.K. Metal Craft Manufacturing. The solicitation number SPE4A6-26-T-42W2 specifies delivery within 171 days, with shipment FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The washers are commercial off-the-shelf (COTS) items subject to detailed technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, including specific inspection and sampling standards per MIL-STD-1916 or equivalent, with zero tolerance for non-conformances unless otherwise stated. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 respectively, and preservation will follow ASTM D3951 standards for commercial packaging. The contract enforces strict packaging, palletization, and identification protocols to ensure compliance with DLA requirements. Inspection and acceptance points are at the destination, and any government identification must be removed from non-accepted supplies. The contract is managed by the Department of Defense’s ASC Commodities Division, with the designated point of contact being Monica Greene. The required ship and delivery date is November 1, 2026, and the contract includes reference to transportation procedures and documentation needed for successful fulfillment.

General Info

Procurement of 351 flat washers, delivery by Nov 1, 2026, strict quality and packaging standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-42W2.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 5

Solicitation

Response DeadlineMay 13

Deadline has passed

Submission Closed

05/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

MONICA GREENE

contact@example.gov

+1 (555) 000-0000

Full Description

WASHER,FLAT
WASHER,FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CATERPILLAR INC 11083 P/N 6N7523
H. K. METAL CRAFT MANUFACTURING 84479 P/N 100961
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016645197 0001 EA 351.000
SPE4A6-26-T-42W2
SECTION B
PR: 7016645197 PRLI: 0001 CONT’D
NSN/MATERIAL:5310010641494
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BL OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION METHOD CODE 10: ITEMS MAY BE PACKAGED IAW ASTM D3951 STANDARD PRACTICE FOR COMMERCIAL PACKAGING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/01/2026 Original Required Delivery Date:11/01/2026
SPE4A6-26-T-42W2 NSN/Part Number: 5310-01-064-1494 Quantity: 351 EA Purchase Request: 7016645197QTY: 351 Delivery: 171 days ADO