WASHER, FLAT

The contract pertains to the procurement of 646 flat washers with Sikorsky Aircraft part number SS4409-058 and NSN 5310-01-129-8961, to be delivered within 103 days after receipt of order to a designated DLA distribution facility in Jacksonville, Florida. The item must conform to Basic Drawing NR 78286 SS4409, Revision 49 dated December 2, 2014, and all technical and quality requirements identified by R or I numbers in the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards including ASTM D3951. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan, with verification levels or AQLs assigned as VII/0.1 for critical, IV/1.0 for major, and II/4.0 for minor attributes; unspecified attributes are considered major. Acceptance criteria require zero non-conformances in the sample lot unless otherwise specified, and manufacturers may elect attribute or variable inspection under MIL-STD-1916. The washers must not contain mercury or mercury-containing compounds except in specified functional applications such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, and any portable fluorescent lamps or instruments containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following RP001, and all labels must comply with Hazard Communication Standard 29 CFR 1910.1200 if hazardous material is involved. The item is subject to export control under ITAR or EAR, requiring offerors to hold an approved US/Canada Joint Certification Program (JCP) certification, complete mandatory DLA training on export-controlled technical data, and receive formal approval from the DLA controlling authority to access such data. Additive manufacturing is strictly prohibited; any offer containing AM-produced components will be deemed ineligible. Compliance with cybersecurity requirements includes CMMC Level 2 certification via a certified third-party assessment organization and adherence to NIST SP 800-171 DOD assessment requirements. The contractor must submit a Safety Data Sheet prior to award, or risk being deemed nonres