This Solicitation opportunity from Department Of Defense was posted on May 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WASHER, FLAT

Closed

SPE4A6-26-T-49W1Federal

Submission Closed05/18/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332613

New

DIBBS

SPRING, HELICAL, COMPThe contract involves the procurement of 24 units of a helical compression spring, identified by the National Stock Number 5360-00-345-4492. The solicitation, numbered SPE4A5-26-T-239U, was issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline of June 23, 2026. This contract is a federal solicitation intended to source these specific components, though details about set-asides, NAICS codes, or specific location of performance are not provided. The contract emphasizes the purchase of helical compression springs, which are typically used in mechanical systems to absorb or exert force. The solicitation ensures that interested vendors must submit their responses within the specified timeframe to be considered. The official contract and response access is managed through the Defense Logistics Agency's bidding platform. No additional contact information or detailed delivery specifics are outlined in the available data.

Defense Logistics Agency

POSTED

DEADLINE

STRAP, RETAININGThe contract pertains to the procurement of 10 units of a retaining strap, identified by the National Stock Number 5340-01-714-0681. The solicitation is issued by the Defense Logistics Agency, part of the Department of Defense, under solicitation number SPE7L1-26-T-707A. The solicitation was posted on June 15, 2026, and responses are due by June 26, 2026. This opportunity is a federal government solicitation and is not designated as a set-aside for any specific business category. Although specific location details for the office or place of performance are not provided, the contract reflects standard federal procurement procedures for supply chain needs within the Department of Defense. Interested parties can access further details and submit their responses through the provided electronic procurement platform link.

Defense Logistics Agency

POSTED

DEADLINE

SPRING, HELICAL, COMPThis contract pertains to the procurement of six units of a helical compression spring identified by the National Stock Number 5360-01-655-2453. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 26, 2026. The contract was solicited under the number SPE7L1-26-T-706P and is categorized as a federal solicitation without any specific set-aside designation. The contract does not specify detailed location information for the office address or place of performance, and no designated point of contact is provided within the data. The focus is strictly on acquiring these specialized springs to meet the Department of Defense's requirements, ensuring timely submission from qualified contractors interested in fulfilling the agency’s needs. The solicitation is accessible through the Defense Logistics Agency’s electronic bidding system for further details and submission.

Defense Logistics Agency

POSTED

DEADLINE

SPRING, HELICAL, COMPThe contract pertains to the procurement of eight helical compression springs with the NSN/Part Number 5360-01-203-2536. The solicitation, identified by the number SPE4A5-26-T-097M, was issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline of June 18, 2026. It is a federal solicitation, but no specific type of set-aside or NAICS code is indicated. The contract data does not specify detailed location information for the place of performance or office address, and there is no point of contact listed. The procurement addresses a specific need for helical compression springs, and interested parties could access more information or respond to the solicitation via the provided online link on the Defense Logistics Agency’s bidding platform.

Defense Logistics Agency

POSTED

DEADLINE

SPRING, GAS TURBINEThis contract involves the procurement of 34 units of gas turbine springs, specifically identified by the National Stock Number 5360-00-615-0594. The solicitation, numbered SPE4A1-26-T-2322, was posted on June 14, 2026, with responses due by June 22, 2026. The purchase request tied to this contract is 7017148645. The contracting agency is the Defense Logistics Agency, operating under the Department of Defense, and the contract is classified as a federal solicitation. While specific details regarding location, NAICS code, or set-aside types are not provided, the contract is managed through the DLA’s procurement system, indicating a federal-level acquisition for defense purposes.

Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

This contract, identified as solicitation SPE4A6-26-T-49W1 issued by the Defense Logistics Agency (DLA) Aviation, ASC Commodities Division, pertains to the procurement of 3,690 each of a flat washer, part number HS306-312L (NSN 5310-01-184-1832). The delivery is set for FOB origin at the DLA Distribution depot in New Cumberland, Pennsylvania, with a required delivery date of November 5, 2026, and a 105-day delivery window following award. Inspection and acceptance of the washers occur at the originating facility in accordance with stringent quality and inspection requirements, including adherence to MIL-STD-1916 and MIL-STD-105/ASQ Z1.4 sampling plans, ensuring conformance to critical, major, and minor attribute quality levels. The contractor must provide a Certificate of Quality Compliance along with standard Contract Data Requirements Lists and comply fully with the DLA Master List of Technical and Quality Requirements as incorporated by reference. Packaging and marking must conform primarily to ASTM D3951 standards, modified as necessary by the DLA technical requirements, with labeling following MIL-STD-129 to ensure proper identification and bar coding for shipment and storage. Palletization complies with DLA packaging directives to guarantee secure and efficient transport. The contract mandates compliance with numerous Federal Acquisition Regulation (FAR) and Defense FAR Supplement (DFARS) clauses, addressing critical aspects such as system for award management maintenance, cybersecurity requirements under NIST SP 800-171, safeguarding of covered defense information, subcontractor controls, and notification of safety issues. Cybersecurity obligations include demonstrated maturity via CMMC Level 2 certification and adherence to covered defense information safeguarding, detailed under DFARS clauses like 252.204-7012 and 252.204-7020. The contract type is to be finalized post-award with options for alternative structures, and invoicing and payment will be conducted primarily through the Wide Area WorkFlow (WAWF) system. The solicitation invites electronic submissions via the DLA Internet Bid Board System (DIBBS), with technical data packages and drawings accessible online. No formal Section J attachments are listed, but references to critical technical and quality documents are incorporated by reference, requiring contractors to conform to defined standards and procedures throughout the performance and delivery phases.

General Info

Procurement of 3,690 flat washers with strict quality, packaging, and cybersecurity compliance by November 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332613 - Spring Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-49W1 DLA Aviation ASC Commodities Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 10

Solicitation

Response DeadlineMay 18

Deadline has passed

Submission Closed

05/18/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

LISA HARVIE

contact@example.gov

+1 (555) 000-0000

Full Description

WASHER,FLAT
WASHER,FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they can also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RD002, COVERED DEFENSE INFORMATION APPLIES
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A6-26-T-49W1
SECTION B
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RT001: MEASURING AND TEST EQUIPMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
CAGE 8V613
THE BOEING COMPANY
CAGE 10630
ANILLO INDUSTRIES, INC.
CAGE 58009
MOELLER MANUFACTURING & SUPPLY, LLC
CAGE 86928
SEASTROM MANUFACTURING CO., INC.
PART NUMBER: HS306-312L
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 8V613 P/N HS306-312L
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015853020 0001 EA 3,690.000
NSN/MATERIAL:5310011841832
DELIVERY (IN DAYS):0105
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:025
SPE4A6-26-T-49W1
SECTION B
PR: 7015853020 PRLI: 0001 CONT’D
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:04/23/2026 Original Required Delivery Date:11/05/2026
SPE4A6-26-T-49W1 NSN/Part Number: 5310-01-184-1832 Quantity: 3,690 EA Purchase Request: 7015853020QTY: 3690 Delivery: 105 days ADO