WASHER, FLAT
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Solicitation SPE4A6-26-T-28XB, issued by the DLA Aviation ASC Commodities Division, is a request for the procurement of two flat washers under NSN 5310-00-187-3661. The required items must be manufactured from carbon steel with a maximum Brinell hardness of 80. Dimensional specifications are strictly defined with a maximum inner diameter of 1.072 inches, outer diameter of 1.510 inches, and thickness of 0.035 inches, and a minimum inner diameter of 1.052 inches, outer diameter of 1.490 inches, and thickness of 0.027 inches. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Delivery is required within 20 days of order, with an original required delivery date of September 3, 2026. Shipping is FOB Origin, with destination inspection and acceptance. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. The award may be automated, and a price evaluation preference is available for SBA-certified HUBZone small business concerns. Invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system.
General Info
Agency
NAICS
Place of Performance
BLDG 15 RM 200, SAN DIEGO, CA, 92113-3650, USASet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
WASHER, FLAT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CARBON STEEL, 80 MAX. BRINELL HARDNESS.
MAX IN. ID 1.072 OD 1.510 THK 0.035
MIN IN. ID 1.052 OD 1.490 THK 0.027
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC UNK FF-W-92C(3) REVISION NR C DTD 05/19/2025 PART PIECE NUMBER: FF-W-92TYAGR1CLA
SPE4A6-26-T-28XB
SECTION B
PR: 7018220561 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018220561 0001 EA 2.000
NSN/MATERIAL:5310001873661
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N2999C
USNS SOJOURNER TRUTH T-AO 210
2798 HARBOR DRIVE
BLDG 15 RM 200
SAN DIEGO CA 92113-3650
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N2999C
USNS SOJOURNER TRUTH T-AO 210
GD NASSCO
8511 KERNS ST. DOCK 5
DLA VENDORS: USE VSM FOR 92154-6223
US
M/F: (TCN) N2999C6243S313
RDD: 777
PROJ: HK5 TP 2
SUPP ADD: YNENGR SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
SPE4A6-26-T-28XB
SECTION B
PR: 7018220561 PRLI: 0001 CONT’D
DIC: A4A DIST: 9B ADV: 2L FC: F4
Need Ship Date:00/00/0000 Original Required Delivery Date:09/03/2026
SPE4A6-26-T-28XB NSN/Part Number: 5310-00-187-3661 Quantity: 2 EA Purchase Request: 7018220561QTY: 2 Delivery: 20 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Ready to Pursue This Opportunity?
Get AI-powered intelligence on this solicitation and the ones like it
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
