Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, FLAT

Active
SPE4A6-26-T-06ZWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of one flat washer, NSN 5310-01-720-0978, with part number DS-932671, sourced from Eaton Aerospace, LLC or Jamaica Bearings Co., Inc., under solicitation SPE4A6-26-T-06ZW. The item is classified as a critical application component and must be delivered within five days of order placement to the Fleet Readiness Center East at Cherry Point, North Carolina, with FOB Origin terms. The total contract value is $1.000, with no quantity variance allowed. Inspection and acceptance occur at the destination, with quality assurance governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in any sample lot unless otherwise specified, and attributes must be assigned verification levels or AQLs consistent with critical, major, or minor classifications. Packaging must comply with ASTM D3951 but is subordinate to the DLA Master List of Technical and Quality Requirements, with all markings and labeling strictly adhering to MIL-STD-129, including barcoding and unit of issue conformity. Palletization follows RP001 standards, and hazardous materials must be labeled in accordance with 29 CFR 1910.1200 or applicable federal statutes. Delivery is prohibited via parcel post and must be shipped by the fastest traceable means. The solicitation, issued by the ASC Commodities Division of the Department of Defense, incorporates numerous FAR and DFARS clauses including those on equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, safeguarding contractor information systems, changes, subcontracting, and small business representation, all subject to a deviation under 2026-00038. Authorization and consent provisions include Alternate I and II of FAR 52.227-1, and accelerated payments to small business subcontractors are required. Offerors must provide a Unique Entity ID and CAGE code, represent size status and socioeconomic certifications, and comply with mandatory reporting triggers for covered telecommunications equipment or joint ventures. The solicitation deadline is July 24, 2026, and proposals must be submitted electronically through the DIBBS portal. The contract is fixed-price, with no options or extensions, and invoicing must be processed through WAWF.

General Info

One flat washer, critical application, $1.000, delivery in five days to Cherry Point, FOB Origin, zero non-conformances required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

MCAS, CHERRY POINT, NC, 28533-0021, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06ZW July 17, 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
KRYSTLE BAILEY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,FLAT
WASHER,FLAT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
EATON AEROSPACE, LLC 62983 P/N DS-932671
JAMAICA BEARINGS CO., INC. 04836 P/N DS-932671
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017470828 0001 EA 1.000
NSN/MATERIAL:5310017200978
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE4A6-26-T-06ZW
SECTION B
PR: 7017470828 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N65923
FLEET READINESS CENTER EAST
PSC 8021
MCAS
CHERRY POINT NC 28533-0021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N65923
DLA/FLEET READINESS CENTER EAST
BLDG 148 BAY C
BEACHEY ROAD
CHERRY POINT NC 28533-5040
US
M/F: (TCN) N659236189A132
RDD: 189
PROJ: 705 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: 24 FC: PC
Need Ship Date:00/00/0000 Original Required Delivery Date:07/13/2026
SPE4A6-26-T-06ZW NSN/Part Number: 5310-01-720-0978 Quantity: 1 EA Purchase Request: 7017470828QTY: 1 Delivery: 5 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EXThis contract is for the procurement of 12,382 self-locking, extended washer hexagon nuts with NSN 5310-00-807-1474 under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a three-year base period and no options, subject to a total maximum contract value of $1,000,000. The delivery is due 405 days after award, with FOB origin terms, and the item is designated by the Navy as a Critical Safety Item requiring strict compliance with quality and sourcing controls. The nuts must conform to NASM21042 Revision 3 and NASM25027 Revision 1, alongside comprehensive technical and quality requirements from the DLA Master List, with inspection and acceptance performed at origin. Sampling must adhere to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with verification levels assigned as VII for critical, IV for major, and II for minor attributes, and unspecified attributes treated as major. All items must be marked per MIL-STD-129, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers, with packaging compliant with MIL-STD-2073-1E and DLA Packaging Requirements, and no mercury or mercury compounds permitted except under specific exceptions for functional uses in batteries, instruments, weapon systems, or NAVSEA-specified reagents, with portable devices requiring shock-proofing and secondary containment. The contract mandates adherence to multiple federal and defense acquisition regulations, including clauses on termination, excusable delays, changes, and prohibitions on certain telecommunications equipment, and requires electronic invoicing via WAWF. Offerors must be registered in SAM and complete required representations, including certifications regarding foreign ownership, export control, and inverted domestic corporations, with a deviation applied to 52.204-19. Export-controlled technical data subject to ITAR or EAR is involved, limiting participation to contractors with approved US/Canada Joint Certification Program credentials, completed DLA export training, and DLA authorization. Only small businesses are eligible under a total small business set-aside, and the award will be based on a best-value determination weighing price, past performance, and delivery performance, with past performance—particularly PIPRS assessments, quality history, and delivery compliance—weighed more heavily than quoted delivery. The contractor must maintain an approved inspection system
ASC COMMODITIES DIVISION

POSTED

in 32 minutes

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
WASHER, CONICALThe contract solicits 2,150 conical washers identified by NSN 5310003520475 and part number ST4M159-08 under solicitation SPE4A6-26-T-07HU, with delivery required 162 days after award, targeting an original delivery date of December 21, 2026, and a need ship date of January 3, 2027. All supplies must be manufactured to meet technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any other standards, including ASTM D3951 for packaging. The product is designated as a critical application item and must be bare item marked per RQ017 with specific part numbers tied to approved suppliers: Simmonds Precision Products Inc, Seastrom Manufacturing Co Inc, and Moeller Manufacturing & Supply, LLC. Mercury or mercury-containing compounds are strictly prohibited unless functionally essential in batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents, and when used, portable fluorescent lamps and instruments must have shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with ASTM D3951 and MIL-STD-129 for labeling and barcoding, with palletization adhering to DLA’s RP001 requirements, and the unit of issue is EA with a quantity per unit pack of 050. The delivery point is FOB origin, with inspection and acceptance occurring at the destination, specifically Hill Air Force Base, Utah, with shipping and parcel post addresses designated accordingly. Invoicing must be conducted via WAWF, and compliance with FAR and DFARS clauses is mandatory, including equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, cybersecurity (NIST SP 800-171), whistleblower protections, and disposal of government-marked non-accepted items. The contract enforces strict reporting of unique entity identifiers, CAGE codes
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
TWIST LOCK ASSEMBLY
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of one socket head cap screw, identified by NSN 5305-01-447-4470, under solicitation SPE4A6-26-T-06YS, with a required delivery date of July 13, 2026, and a 20-day delivery window. The item must be furnished in accordance with stringent packaging standards outlined in MIL-STD-2073-1E and marked in compliance with MIL-STD-129, including specific preservation methods and prohibiting any mercury or mercury compounds in preservation, packaging, or marking materials. The delivery is FOB destination, with inspection and acceptance also occurring at the destination, and no quantity variance is permitted. The item is designated as a critical pump part sourced exclusively from Carver Pump Co. under part numbers N-999-6402-A-001 Item 82 and 804-0500-11-900, with mandatory physical identification per contract requirements. Mercury is strictly prohibited in all supplied hardware unless specifically exempted for functional components like batteries or instruments, and any portable devices containing mercury must include secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, with sampling governed by MIL-STD-1916 or comparable zero-based plans, and non-conformances must result in zero acceptance unless otherwise stated. All shipments must be routed to the specified FPO address for USS Harry S. Truman, with transportation governed by DLAD procedures, and the supplier must adhere to unit of issue standards and marking codes as defined in referenced documentation.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, BEVELThe contract pertains to the procurement of eight bevel washers identified by NSN 5310-01-658-3478, with a delivery requirement of 20 days after order. The solicitation, issued under number SPE4A6-26-T-06VZ on July 16, 2026, with a response deadline of July 24, 2026, is managed by the ASC Commodities Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions controlled based on the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted items must have government identification removed. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stipulated. Documentation for source approval must meet RC001 requirements, and all work is subject to the specified quality assurance provisions. The primary point of contact is Krystle Bailey, reachable at the provided phone and email.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details