This Solicitation opportunity from Department Of Defense was posted on March 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WASHER, KEY

Awarded

SPE4A6-26-T-895NFederal

Submission Closed03/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

Federal

HARDWARE (HEX HEAD CAPSCREWS & BOLTS)

Solicitation # SPMYM327Q2002

The Portsmouth Naval Shipyard, under DLA Maritime, is soliciting quotes for various commercial hardware items, specifically hex head capscrews and heavy hex bolts, under solicitation SPMYM327Q2002. The requirement includes specific items such as 5/8-11UNC-2A capscrews, zinc-coated self-locking capscrews, and heavy hex bolts conforming to standards including ASTM A193 B16, ASTM B633 Type-2, MIL-DTL-18240 Type-N, and QQ-N-286G. This procurement is a 100% Small Business Set-Aside under NAICS code 332722. The government required delivery date is December 3, 2026, with shipping terms set as FOB Destination. Award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must be active in the System for Award Management (SAM) and provide CMMC unique identifiers if applicable. Strict packaging and marking requirements are in place, mandating compliance with MIL-STD-129 for military items and ASTM D-3951 for commercial items, while prohibiting the use of asbestos and loose fill polystyrene. Quality evidence, including test results and material certifications, must accompany each package. Invoices are to be submitted via Wide Area Workflow (WAWF) with payment terms of Net 30 days after material acceptance. Quotes are due by November 4, 2026, at 11:00 AM EST.

DLA Maritime - Portsmouth

POSTED

DEADLINE

Solicitation # N0010426QFG16

This contract specifies the procurement of machine bolts designated as Special Emphasis Level I material for use in critical shipboard systems, where failure could result in catastrophic consequences including loss of life or ship. The bolts must comply with Leslie Controls Inc. drawing 21844N and material specification ASTM-A193 Grade B7, with stringent requirements for traceability, chemical and mechanical testing, and certification. Each production lot requires quantitative analysis, wedge tensile testing, and nondestructive inspection via liquid penetrant or magnetic particle methods, all governed by MIL-DTL-1222 and other referenced standards such as ASTM-F606, FED-STD-H28, and ISO-9001. Traceability must be maintained from raw material through final inspection via unique heat-lot markings applied per MIL-STD-792, and certification reports must be 100% complete, unqualified, and directly linked to each item's marking without transcription. All deliveries require submission of certification data through WAWF to Portsmouth Naval Shipyard (N50286) for prior approval, with no material allowed to ship until acceptance is granted. The contractor must maintain an ISO-9001 or MIL-I-45208 quality system with calibration compliance to ISO-10012 or ANSI-Z540.3, subject to government audit at source. Government Quality Assurance will conduct independent inspections, including 100% verification of traceability, documentation legibility, and compliance with all contractual specifications. Subcontractors are bound by the same requirements and must be vetted, monitored, and audited by the prime contractor. The contract mandates zero-defect acceptance for final inspection, prohibits mercury or unauthorized modifications, and enforces strict configuration control with formal Engineering Change Proposals required for any alterations. All documentation must be submitted electronically via ECDS, and waivers or deviations—classified as Critical, Major, or Minor—require explicit Contracting Officer approval. The product must be delivered within 365 days of contract effectiveness, and the warranty extends one year from delivery date. The contract is issued under a Navy-specific small business set-aside and is a DPAS-rated order for national defense use, with full compliance obligations under Buy American and other federal program requirements.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010427QYA45

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

53--NUT,SELF-LOCKING,HE

Solicitation # N0010425QBV19

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QYAHV

NAVSUP Weapon Systems Support Mechanicsburg is soliciting the procurement of 71 machine screws for sub antenna systems under NSN 1H-5305-010877548-SQ. This emergency acquisition is intended for a one-year duration with deliveries destined for DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. While the government intends to solicit full and open competition, the current source is identified as the Original Equipment Manufacturer and the only known provider capable of satisfying the requirements due to a lack of government-owned data. The procurement follows FAR Part 15 procedures and includes UID and Buy American requirements. Interested parties must submit capability statements or proposals via electronic procedures on NECO. The solicitation is expected to be issued around September 3, 2026, with a response deadline of October 3, 2026, and an anticipated award date of October 18, 2026. This effort is designated as a total small business set-aside.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Electrical Connectors & FastenersThis subcontract for Electrical Connectors and Fasteners supports prime contractors working on Nebraska Public Power District projects. The scope of work involves the delivery of high-conductivity terminals and assembly hardware, specifically solderless compression ring terminals made from copper or aluminum alloy preloaded with non-oxidizing inhibitor. Additionally, the contract requires the provision of stirrups and 18-8 stainless steel assembly bolts equipped with silicon bronze hex nuts. All provided materials must adhere to Build America, Buy America (BABA) compliance standards. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 6, 2026. The contract falls under NAICS code 332722 and focuses on the essential supply of specialized electrical fasteners and connectors for regional power infrastructure.

Nebraska Public Power District

POSTED

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture and Supply of Plain Hexagon Nuts (NSN 5310-00-268-6055)This subcontract involves the manufacture and supply of 492 precision-manufactured plain hexagon nuts, identified by NSN 5310-00-268-6055, for prime contractors supporting DLA Weapons Support ASC projects. The hardware must be produced in strict accordance with NASM316 and FF-N-836F(1) specifications, with a mandatory requirement for zero mercury content and bare item marking compliant with MIL-STD-130N. The selected provider must adhere to the Buy American Act and provide a Certificate of Quality Compliance for the shipment. Delivery of the components is designated as FOB Origin to DLA Distribution Cherry Point, North Carolina. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Close Tolerance Screw Manufacturing (NAS7802U3)This subcontract involves the manufacture of 116 close tolerance screws, part number NAS7802U3, for the DLA Weapons Support ASC Commodities Division. The fabrication process requires precision CNC machining in strict accordance with National Aerospace Standard 80205 and TDP Rev A Gen 1. Quality control must be maintained through sampling per MIL-STD-1916 or ASQ H1331, and the final products must adhere to Buy American requirements and MIL-STD-2073-1E packaging standards. The project is categorized under NAICS code 332722 and will be performed in New Cumberland. Interested parties should note the response deadline of November 5, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Multiple Angle Sensor BracketsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the manufacture or procurement of Multiple Angle Sensor Brackets under NSN 5340016076959. The contractor is responsible for supplying 12 units of these specialized hardware brackets to prime contractors, with a strict delivery requirement of 5 days from the date of order. Performance for this contract is based in Anniston. Compliance with specific military and industry standards is mandatory, requiring all non-hazardous materials to be packaged according to ASTM D3951 and all shipments to be labeled per MIL-STD-129. The opportunity falls under NAICS code 332722 and was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of L3 Technologies Screw AssortmentsThis subcontract involves the supply of 274 units of L3 Technologies, Inc. screw assortment kits, part number OFB-2080-A1, for prime contractors supporting the DLA Weapons Support ASC. The performance of this contract takes place in New Cumberland, Pennsylvania, with delivery terms set as FOB Origin. The supplier must adhere to strict quality and technical standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging and marking requirements according to MIL-STD-2073-1E and MIL-STD-129. Full compliance with the DLA Master List of Technical and Quality Requirements is mandatory for the fulfillment of this order.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract calls for the procurement of 534 units of a key washer, part number NAS1193K12-2, manufactured according to the NAS1193 specification, revision 13 dated August 30, 2024. This item is a critical application part produced by metal casting, subject to specific technical and quality requirements detailed in the Defense Logistics Agency (DLA) Master List, with sampling and inspection governed by military standards such as MIL-STD-1916 and MIL-STD-105/ASQ Z1.4. The hardware must comply with the current revision of the applicable military or industry part standard, ensuring quality and traceability. Packaging, marking, and palletization requirements align with ASTM D3951 and MIL-STD-129, and the goods are to be delivered FOB origin to DLA Distribution Jacksonville, Florida, with inspection and acceptance conducted at the destination. The contract specifies stringent quality controls, including tailored higher-level contract quality requirements and removal of government identification from rejected supplies. Delivery is scheduled within 169 days of award, with the need-by date on September 2, 2026, and final delivery by October 25, 2026. Transportation and freight instructions are provided in accordance with Defense Logistics Agency directives. The contracting agency is the Department of Defense, ASC Commodities Division, with the primary point of contact listed for technical or sourcing inquiries. This acquisition adheres to all relevant DLA packaging and quality standards, ensuring the washer meets all critical performance and regulatory criteria.

General Info

Procurement of 534 NAS1193K12-2 washers meeting military standards, delivered to DLA Jacksonville by October 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

Contract Value

$3,204

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

RAYMOND MORGAN 904-661-5135, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Awardee

APOLLO AEROSPACE COMPONENTS LLC

Award Issued Date

04/22/2026, 12:00:00 AM UTC

Documents

SPE4A6-26-T-895N.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMar 8

Solicitation

AwardedApr 22

Contract was awarded

Submission Closed

03/16/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Abigail Hatch

contact@example.gov

+1 (555) 000-0000

Full Description

WASHER,KEY
WASHER, KEY
SPECIFICATION
NAS1193, P/N NAS1193K12-2
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) contact@example.gov.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
SPE4A6-26-T-895N
SECTION B
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
CRITICAL APPLICATION ITEM
IAW BASIC NON GOVT STD NAS1193
REVISION NR 13 DTD 08/30/2024
PART PIECE NUMBER: NAS1193K12-2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015808926 0001 EA 534.000
NSN/MATERIAL:5310011092200
DELIVERY (IN DAYS):0169
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SPE4A6-26-T-895N
SECTION B
PR: 7015808926 PRLI: 0001 CONT’D
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
JACKSONVILLE FL 32212-0103
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3122
DLA DISTRIBUTION JACKSONVILLE
BLDG 175 SWAN ROAD
RAYMOND MORGAN +1 (555) 000-0000
JACKSONVILLE FL 32212-0103
US
Need Ship Date:09/02/2026 Original Required Delivery Date:10/25/2026
SPE4A6-26-T-895N NSN/Part Number: 5310-01-109-2200 Quantity: 534 EA Purchase Request: 7015808926QTY: 534 Delivery: 169 days ADO