This Solicitation opportunity from Department Of Defense was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WASHER, KEY

Closed

SPE4A5-26-T-109XFederal

Submission Closed05/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

NUT , SELF-LOCKING, PLThe contract involves the procurement of 27 self-locking nuts, identified by the National Stock Number 5310-00-283-4635. The solicitation, issued by the Department of Defense's Defense Logistics Agency, is designated under the number SPE4A6-26-T-92R0 and is intended for federal acquisition purposes. Key dates include the posting date of June 15, 2026, and a response deadline on June 23, 2026. This solicitation does not specify any set-aside type or NAICS code, indicating that it is open without particular preference for small businesses or other categories. The purchase request associated with this contract is numbered 7017149106. Although detailed location and point of contact information is absent, the contract is firmly anchored within federal procurement channels, with the Defense Logistics Agency serving as the contracting agency responsible for managing this acquisition.

Defense Logistics Agency

POSTED

DEADLINE

PIN-RIVETThe contract involves the procurement of 12 PIN-RIVETS with the National Stock Number 5320-01-696-1475. This solicitation is issued by the Defense Logistics Agency under the Department of Defense, identified by the solicitation number SPE4A6-26-T-92R4. The contract was posted on June 15, 2026, with a response deadline of June 23, 2026. The solicitation is classified as a federal contract, with no specified set-aside or NAICS code indicated. The procurement does not list a specific location for the place of performance or the agency’s office address, and there is no point of contact provided within the contract details. The contract remains open for responses through the DIBBS platform, highlighting the standardized federal purchasing procedures for acquiring these PIN-RIVETS.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the procurement of a single unit of a cap socket head screw identified by the National Stock Number 5305-01-721-0324. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-92J7. It was posted on June 15, 2026, with a response deadline set for June 23, 2026. This federal solicitation does not specify any set-aside status or NAICS code, and the place of performance details are unspecified. The contract involves a purchase request number 7017127215 for quantity one of the specified item. The contracting agency is a federal entity, ensuring adherence to government procurement regulations. Although specific contact details and office locations are not provided, the contract and related solicitation information can be accessed through the provided online link on the Defense Logistics Agency’s bidding portal.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the purchase of seven units of a socket head cap screw identified by the National Stock Number (NSN) 5305-01-283-4206. It is issued by the Defense Logistics Agency, a part of the Department of Defense, under the solicitation number SPE4A6-26-T-92P3. The solicitation was posted on June 15, 2026, with a response deadline set for June 23, 2026. This contract is categorized as a solicitation type and does not specify any type of set-aside or NAICS code. The place of performance and specific office address details are not provided. The procurement is managed within a federal organization framework, indicating a government acquisition focused on fulfilling defense-related hardware needs.

Defense Logistics Agency

POSTED

DEADLINE

SCREW, CAP, SOCKET HEThe contract involves the procurement of a single unit of a cap socket head screw, identified by the National Stock Number (NSN) 5305-01-684-3687. The solicitation, issued under the number SPE4A6-26-T-92L1, was posted on June 15, 2026, with a response deadline set for June 23, 2026. This solicitation is managed by the Defense Logistics Agency, a branch of the Department of Defense. The contract is a straightforward purchase request (7017127199) for one item, with no specified set-aside or NAICS code indicated, meaning it is open and not restricted to certain business types. The place of performance and specific office address details are unspecified. Interested parties can access the solicitation details and respond via the provided Defense Logistics Agency online portal.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

This contract is for the procurement of two units of a keyed washer (NSN 5310-01-120-4379, part number 3500452-1) under solicitation number SPE4A5-26-T-109X, managed by the Department of Defense’s ASC Supplier Oper OEM Division. The order requires delivery to DLA Distribution Cherry Point, North Carolina, with a delivery timeline of 83 days after the award, and a firm delivery date no later than December 11, 2026. Packaging and packing must comply with ASTM D3951 and MIL-STD-129 standards, with palletization in accordance with DLA packaging requirements (RP001). Inspection and acceptance of the goods will occur at the destination facility. The contract incorporates specific technical and quality requirements from the DLA Master List, which take precedence over standard packaging instructions. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with specified quality assurance levels depending on the criticality of product attributes. The contract also includes requirements for physical identification and marking of the items, and the removal of government identification from non-accepted supplies. The point of contact for this procurement is Alexis Dolberry, reachable via email or phone for further coordination. Transport and shipping instructions reference specific DLA procedural notes to ensure compliance with government logistics protocols.

General Info

Procurement of two keyed washers, delivered by December 11, 2026, meeting DLA packaging standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing View NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-109X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 4

Solicitation

Response DeadlineMay 12

Deadline has passed

Submission Closed

05/12/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

ALEXIS DOLBERRY

contact@example.gov

+1 (555) 000-0000

Full Description

WASHER,KEY
WASHER, KEY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 59364 P/N 3500452-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016634924 0001 EA 2.000
NSN/MATERIAL:5310011204379
SPE4A5-26-T-109X
SECTION B
PR: 7016634924 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0083
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:08/04/2026 Original Required Delivery Date:12/11/2026
SPE4A5-26-T-109X NSN/Part Number: 5310-01-120-4379 Quantity: 2 EA Purchase Request: 7016634924QTY: 2 Delivery: 83 days ADO