Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, KEY

Active
SPE4A6-26-T-15XAFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 1,081 key washers under NSN 5310-01-102-4671. The contract requires delivery within 170 days after order and is categorized under NAICS code 332722. The place of performance is located in New Cumberland, Pennsylvania. The agreement incorporates several critical technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the item is subject to strict export controls under ITAR or EAR regulations. Access to technical data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.

General Info

DoD procurement of 1,081 key washers for delivery in New Cumberland, Pennsylvania.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-15XA.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
MICHAEL BLAIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,KEY
WASHER, KEY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-01-102-4671 Quantity: 1,081 EA Purchase Request: 7017837506QTY: 1081 Delivery: 170 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-15XL
This contract is a solicitation for the procurement of 114 machine bolts under NSN 5306-01-729-0563. The items must be manufactured in accordance with Technical Data Package Rev A Gen 3 and specific basic and reference drawings. Delivery is required within 229 days, with a need ship date of April 7, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging, marking, and palletization standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by a zero-based sampling plan following MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Certificate of Conformance procedures are authorized unless otherwise specified by a quality assurance letter of instruction.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EX
Solicitation # SPE4A6-26-T-15MJ
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 1,238 self-locking hexagon nuts with extended washers under NSN 5310-01-058-3983. The contract is being pursued as a fully competitive acquisition in accordance with military and federal specifications. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The solicitation, identified as SPE4A6-26-T-15MJ, was posted on August 12, 2026, with a response deadline of August 19, 2026. Successful delivery of the items is required within 33 days after the order is placed, with the place of performance located in Cherry Point. Vincent Price serves as the primary point of contact for this federal requirement.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANCE
Solicitation # SPE4A6-26-T-15VQ
This contract is for the procurement of 2,031 close tolerance screws, identified by NSN 5305-01-183-5871. The order is managed by the ASC Commodities Division of the Department of Defense and requires delivery to DLA Distribution Warner Robins in Georgia. The delivery timeline is set for 170 days after the order, with a required delivery date of October 14, 2026, and a need ship date of February 7, 2027. The supplier must adhere to strict quality and technical standards, including NAS1580 and NAS4004 specifications. Key requirements include CMMC Level 2 self-assessment, covered defense information protocols, and specific marking and identification per MIL-STD-130N. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-15VK
This contract is for the procurement of 400 hexagon head cap screws, identified by NSN 5305015919101 and part number J2295F468C2R08-N16U. The items must adhere to SAE J2295 specifications with a thread class of 2A and are designated as critical application items. Manufacturing must comply with the current revision of the part standard, and mechanical property marking must follow the latest edition of SAE J2295. The agreement specifies a delivery timeframe of 60 days with a required delivery date of June 25, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and RP001, requiring each fastener to have the entire length of the shank and threads protected by a wrap or sleeve. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and identification marking must follow MIL-STD-130N.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-R-XC50
Solicitation SPE4A6-26-R-XC50 is a total small business set-aside for the procurement of blind rivets (NSN 5320-01-084-6090) issued by the DLA Aviation ASC Commodities Division. This firm fixed price effort is intended to result in an Indefinite Delivery Purchase Order with a five year base period and a total maximum dollar value not to exceed 350,000 dollars. The estimated annual demand is 5,189 units, with a guaranteed minimum base year quantity of 1,280 units. Delivery is requested 258 days after receipt of order, with inspection and acceptance occurring at the origin. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Quality assurance includes tailored higher level contract quality requirements and sampling in accordance with MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-129 for marking and RP001 for palletization. Award decisions will be based on best value via a trade-off among cost, past performance, and quoted delivery, with past performance weighted more heavily than delivery. Invoicing and payment must be processed electronically through the Wide Area Workflow system.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-15VA
This contract is for the procurement of 48 socket head cap screws, identified by NSN 5305-01-530-8349 and part number NAS1352C8LL20. The items are classified as critical application hardware and must be manufactured according to the current revision of the applicable part standards, including NAS1352 and FF-S-86J. Dimensional conformance for Class 3A and 3B threads must be inspected per FED-STD-H28/20, and identification marking must comply with MIL-STD-130N. The agreement mandates strict quality assurance and sampling protocols following MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging and palletization must adhere to DLA requirements, MIL-STD-2073-1E, and MIL-STD-129, with a total prohibition on the intentional use of mercury in the hardware or packaging. Delivery is set for FOB Origin with a destination inspection point, requiring shipment to DLA Distribution San Joaquin in Tracy, California, by the required delivery date of May 4, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER REBOUND
Solicitation # SPE4A6-26-T-15WC
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of two rebound washers under NSN 5310-01-503-6787. The contract requires a rapid delivery turnaround of five days after the order is placed. Performance will take place in Portsmouth, Virginia, and the solicitation is categorized under NAICS code 332722. The agreement mandates strict adherence to DLA technical and quality requirements, specifically regarding physical identification, bare item marking, and packaging. Quality assurance must follow zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with specific verification levels for critical, major, and minor attributes. Additionally, all items must comply with MIL-STD-130N for the identification marking of U.S. military property and include necessary documentation for source approval requests.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STUD, CONTINUOUS THR
Solicitation # SPE4A6-26-T-15TZ
This contract is for the procurement of one continuous thread stud, identified by NSN 5307013624391 and part number US-70293 from John Crane, Inc. The agreement is managed by the Department of Defense under solicitation number SPE4A6-26-T-15TZ, with a required delivery date of August 6, 2026, and a delivery timeframe of 20 days after order. Shipping is set as FOB Origin, and the item is to be delivered to the US Army AWCF SSF at Fort Campbell, Kentucky. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-2073-1E, and marking requirements per MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will occur at the destination, and the shipment must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
STANDOFF, THREADED, S
Solicitation # SPE7L1-26-T-958X
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 142 threaded standoffs and plain hexagon nuts used in electrical and mechanical equipment. The contract is open for full and open competition under NAICS code 332722, with a delivery requirement of 133 days after order. Performance is designated for Tracy, California, and the procurement is governed by military and federal specifications. The agreement incorporates strict technical and quality requirements, including DLA packaging standards and configuration change management. Quality assurance is mandated through a Certificate of Quality Compliance and specific inspection and acceptance protocols at the origin. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots unless otherwise specified.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-15XR
This contract is for the procurement of 444 flat washers, identified by NSN 5310017006862 and part number NAS1149C0463. The order is governed by the DLA Master List of Technical and Quality Requirements, specifically incorporating standards for packaging, government identification removal, and bare item marking. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required unless otherwise specified. Delivery is set for 5 days after order, with a required delivery date of August 7, 2026. The items are to be shipped FOB Origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable means. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 DLA packaging requirements. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A6-26-T-15WX
This contract is for the procurement of six sheet spring nuts, identified by NSN 5310-00-833-4396 and part number NAS488-10-1. The items must adhere to technical specifications NAS488 Revision 5 and MIL-N-3337C. Delivery is required within 20 days of order, with the final destination being Davis Monthan AFB in Arizona. The contract specifies a zero percent quantity variance and requires inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements RP001. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Shipping must be handled via traceable means, and the removal of government identification from non-accepted supplies is required per RQ011.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-15WW
This contract is for the procurement of 76 plain hexagon nuts, identified by NSN 5310-01-658-3811 and part number AEN26M08B000BA7A81. The items must conform to ASME B18.24-2023 standards and adhere to specific DLA technical and quality requirements, including MIL-STD-130N for marking and MIL-STD-1916 or ASQ H1331 for sampling. Delivery is required within 60 days, with the final destination and inspection point located at DLA Distribution San Joaquin in Tracy, California. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and requires the removal of government identification from any non-accepted supplies. All shipments are to be delivered FOB Origin, with a required delivery date of August 11, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332721
New
DIBBS
Precision Machined Fastener Manufacturing – Pin-Rivet CollarsThis subcontract through the Department of Defense ASC Commodities Division involves the manufacture and delivery of precision-engineered pin-rivet collars under NSN 5320-00-064-0152. The project requires strict adherence to military specifications and quality standards to ensure the components are suitable for defense applications. The procurement falls under NAICS code 332721 for precision machining. Interested parties must submit their responses by August 26, 2026, following the posting date of August 12, 2026.
Precision Turned Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-15WU
This contract is for the procurement of 1,477 threaded pin-rivets, identified as NSN 5320014527666. The item is classified as a commercial off the shelf product and a critical application item. Due to the nature of the part, casting or forging may be required, and offerors must provide a manufacturer Certificate of Compliance and documentation of ownership transfers to ensure traceability to the certified lot. The delivery is required within 100 days, with a need ship date of November 29, 2026, and a final required delivery date of January 3, 2027. Shipping is FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must adhere to ASTM D3951 and MIL-STD-129, while following the DLA Master List of Technical and Quality Requirements. Authorized manufacturers include SPS Technologies, Hi-Shear Corporation, Lisi Aerospace Canada Corp, Howmet Global Fastening Systems, and Huck International.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
COLLAR, PIN-RIVET
Solicitation # SPE4A6-26-T-15WY
This contract, identified as SPE4A6-26-T-15WY, is for the procurement of 890 units of pin-rivet collars under NSN 5320-01-623-0156. The item is designated as a critical application item with a required delivery date of March 7, 2027, and a delivery window of 197 days. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for source approval, covered defense information, and configuration change management. Quality assurance follows MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following the RP001 DLA packaging requirements.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULA
Solicitation # SPE4A6-26-T-15UC
This solicitation from the ASC Commodities Division of the Department of Defense is for the procurement of two annular ball bearings under part number 3110-00-293-8567. The contract requires delivery within five days after the order is placed and is subject to specific technical and quality requirements outlined in the DLA master list. Key compliance mandates include adherence to DLA packaging standards, quality conformance inspections, and inspection and acceptance at the origin. The contract contains strict security and legal constraints, including the application of covered defense information and export controls under ITAR and EAR regulations. Technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Item Unique Identification is not required for this specific request.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325110
New
DIBBS
COATING KIT, CHEMICAL
Solicitation # SPE4A6-26-T-15VL
This contract is for the procurement of three chemical coating kits, identified as commercial off the shelf items under NSN 6850-01-733-3025 and part number FP-110CM. Each kit consists of two boxes containing various components, including polyurethane coating, curing agents, accelerators, thinners, and fluoroelastomer tiecoats and topcoats. The material has no shelf life requirement and must be delivered FOB origin within 20 days. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001. Because the materials are hazardous, the contractor must provide an SDS and OSHA hazard warning labels for approval by technical personnel before the contract award. Quality assurance will be managed through zero based sampling plans such as MIL-STD-1916 or ASQ H1331. The final shipment is destined for the ROKAF LC Consolidated Supply Depot in South Korea.
Petrochemical Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-15TQ
This contract is for the procurement of one cable assembly, part number N254575-01, manufactured by Gentex Corporation. The order is identified by NSN 5995-01-675-7241 and requires delivery within 20 days. The item is to be shipped FOB Origin to Assault Craft Unit 4 in Virginia Beach, Virginia, using traceable shipping methods. Compliance requirements include CMMC Level 2 self-assessment and adherence to covered defense information standards. Technical and quality requirements are governed by the DLA Master List, with specific packaging and marking standards following MIL-STD-2073-1E and MIL-STD-129. Sampling must align with MIL-STD-1916 or ASQ H1331, and there is a strict prohibition against the intentional use of mercury or mercury-containing compounds in the hardware or packaging.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLIC
Solicitation # SPE4A6-26-T-15XJ
This solicitation, issued by the Department of Defense ASC Commodities Division under number SPE4A6-26-T-15XJ, is for the procurement of one nonmetallic rubber grommet. The item is identified by NSN 5325-00-809-8867 and part number 1418 from Atlantic India Rubber Co Inc. Delivery is required within 10 days after receipt of the order. The contract is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, it includes a requirement for the removal of government identification from any non-accepted supplies. The response deadline for this federal acquisition is August 20, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details