This Solicitation opportunity from Department Of Defense was posted on May 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
WASHER, LOCK
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract pertains to the procurement of a single unit of a lock washer, identified by NSN 5310-01-251-9735 and part number 9157798-52, with delivery required within five days to Fort Bragg, North Carolina. It incorporates detailed technical and quality requirements as specified by the Defense Logistics Agency (DLA) Master List, which take precedence over standard packaging guidelines like ASTM D3951. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements to ensure proper identification and handling. The inspection and acceptance of the item will occur at the destination, and no quantity variance is allowed. Sampling and quality verification will follow MIL-STD-1916 or equivalent zero-based sampling plans unless otherwise specified, emphasizing strict adherence to critical and major attribute testing. The contract also outlines shipping to be by fast, traceable means, explicitly excluding parcel post, with the destination and freight shipping address at the US Army Aviation and Missile Command facility at Fort Bragg. The solicitation number is SPE4A0-26-T-3120, with response and posted dates in May 2026, managed by the Department of Defense's Aviation Supply Chain ESOC BUYS office. The point of contact for this procurement is Danita Davis. This contract emphasizes strict compliance with government identification, quality assurance provisions, and packaging instructions to ensure the delivered part meets all specified requirements for military use.
General Info
Agency
NAICS
Place of Performance
BLDG Y5015 MMD BLVD, FORT BRAGG, NC, 28310, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
WASHER, LOCK
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
(18876) U S ARMY AVIATION AND MISSILE COMMAND
IAW BASIC DRAWING NR 18876 9157798
REVISION NR C DTD 10/26/1972
PART PIECE NUMBER: P/N 9157798-52
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A0-26-T-3120
SECTION B
PR: 7016735844 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016735844 0001 EA 1.000
NSN/MATERIAL:5310012519735
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
MARKFOR
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
M/F: (TCN) W81YT461280013
RDD: N
SPE4A0-26-T-3120
SECTION B
PR: 7016735844 PRLI: 0001 CONT’D
PROJ: TP 1
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:05/13/2026
SPE4A0-26-T-3120 NSN/Part Number: 5310-01-251-9735 Quantity: 1 EA Purchase Request: 7016735844QTY: 1 Delivery: 5 days ADO