Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, LOCK

Active
SPE4A6-26-T-05STFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 47 units of a WASHER, LOCK with NSN 5310011456103, issued under solicitation SPE4A6-26-T-05ST by the ASC Commodities Division of the Department of Defense. Delivery is required within 74 days from the award date, with FOB Origin terms, and the sole delivery point is the DLA Distribution Facility in New Cumberland, Pennsylvania. The unit price is $47.00 per piece, resulting in a total contract value of $2,209.00. The item is not covered by an approved technical data package, as the available information is proprietary or insufficient for competitive procurement, and compliance with technical and quality requirements must be sourced from the DLA Master List of Technical and Quality Requirements identified by R or I numbers. The procurement includes stringent packaging and marking directives in accordance with MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods, container types, and pack codes mandated. Mercury or mercury-containing compounds are strictly prohibited in any aspect of preservation, packaging, or marking, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents as specified by NAVSEA, with additional containment requirements for portable mercury-containing devices. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required in sample lots unless otherwise stated, and all attributes must meet specified verification levels or AQLs. Covered defense information applies, necessitating compliance with NIST SP 800-171 and the safeguarding requirements of FAR 252.204-7012. The contractor must be registered in SAM.gov, use WAWF for invoicing and receiving reports, and comply with clauses on whistleblower rights, cyber incident reporting, trafficking in persons, employment eligibility verification, hazardous materials, and the Berry Amendment and Buy American Act. The solicitation is not a small business set-aside, and all quotes must be submitted via DIBBS by the closing date of July 21, 2026.

General Info

47 lock washers at $47 each, delivery in 74 days, FOB origin, comply with MIL-STD and DLA requirements, no mercury.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-05ST Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ashley Jones
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,LOCK
WASHER, LOCK


DSCR DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT.

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SPE4A6-26-T-05ST
SECTION B
AFCON PRODUCTS, INC. 60283 P/N 146B 92400-2-4
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016228151 0001 EA 47.000
NSN/MATERIAL:5310011456103
DELIVERY (IN DAYS):0074
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
SPE4A6-26-T-05ST
SECTION B
PR: 7016228151 PRLI: 0001 CONT’D
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/04/2026 Original Required Delivery Date:08/18/2026
SPE4A6-26-T-05ST NSN/Part Number: 5310-01-145-6103 Quantity: 47 EA Purchase Request: 7016228151QTY: 47 Delivery: 74 days ADO

Similar Contracts

NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HThe contract pertains to the procurement of 1,317 units of a hexagon cap screw identified by NSN 5305-01-519-8733 under solicitation SPE4A6-26-T-05PE, with a delivery deadline of 151 days after award. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds to the hardware, with exceptions allowed only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier in compliance with NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contract mandates adherence to MIL-STD-1916 or an equivalent zero-based sampling plan, with undefined attributes treated as major; inspection must result in zero non-conformances unless otherwise stipulated. All Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small internal and external threads. Items must be marked per MIL-STD-130N, and government identification must be removed from non-accepted supplies. Cybersecurity requirements mandate either a CMMC Level 2 self-assessment or certification by a C3PAO. Packaging, identification, and quality assurance are subject to DLA-specific directives including RD002, RQ001, RQ011, and RQ017. The contracting office is the ASC Commodities Division under the Department of Defense, with performance taking place in New Cumberland, PA, and primary contact information provided for administrative correspondence.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERANThe contract specifies the procurement of a close tolerance screw with part number C20645-3-2 and NSN 5305014586543, requiring 739 units to be delivered FOB origin within 341 days, with a unit price of $739.00 and a total value of $546,121. The item is designated as a critical application component, subject to stringent quality and configuration control requirements under DLA directives, including compliance with MIL-STD-1916 or comparable zero-based sampling plans where critical attributes demand verification level VII or AQL 0.1 and non-conformances must be zero unless otherwise stated. All supplies must adhere to MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA-specific packaging guidelines, with no special marking applied. Inspection and acceptance occur at the manufacturer’s origin, and configuration changes must be managed through formal engineering change proposals or variance requests. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. A separate line item for the First Article Test (FAT) is included with a quantity of one unit, identified by NSN 0001S00000052, priced at $1.00 but with no separate charge assumed unless specified; the actual test quantity is defined under FAR clauses 52.209-3 or 52.209-4 in Section A of the solicitation, and the FAT line will not be awarded if the requirement is waived. Packaging and shipping instructions direct delivery to DLA Distribution Depot Hill at Hill AFB, Utah, referenced under DLA Procurement Notes C19 and C20 for transportation protocols. Multiple approved suppliers are listed including Lockheed Martin Corp, SPS Technologies LLC, Valley-Todeco Inc., and B & B Specialties Inc., all authorized under shared part numbers and manufacturer codes. The solicitation number is SPE4A6-26-T-05PM, issued by the Department of Defense’s ASC Commodities Division with a response deadline of July 21, 2026, and the contract is bound by comprehensive quality assurance provisions applicable to both manufacturers and non-manufacturers under tailored higher-level requirements.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract specifies the procurement of flat washers identified by NSN 5310-00-141-1795 and part number NAS1149F0463P, with a total quantity of 157,389 units distributed across three delivery lines, each requiring firm fixed pricing and zero variance in quantity. The item is designated as a commercial item and a Navy-identified critical safety item, triggering stringent quality and traceability requirements including compliance with SAE AS9100 and AS9120 certifications for manufacturers and distributors. All supplies must conform to MIL-STD-129 marking standards, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, with packaging adhering to MIL-STD-2073-1E and DLA packaging guidelines. Mercury and mercury compounds are strictly prohibited in the product, preservation, packaging, and marking processes, except for specific authorized applications. Inspection and acceptance occur at origin, and the item must be delivered within 150 days of award. The technical data package references non-government standards NAS1149 Rev 8 and quality assurance plan QAP 13873, and all deviations or waivers must be submitted to the DSC contracting officer. Multiple approved sources are listed, including Northrop Grumman, Lockheed Martin, Sikorsky, and Superior Washer & Gasket Corp., with deliveries directed to three DLA distribution centers in Georgia, California, and Pennsylvania.
NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, CASTELLATThe contract involves the procurement of 39 castellated hexagon nuts with the NSN 5310-00-167-1279 under solicitation SPE4A6-26-T-05NY, issued by the ASC Commodities Division of the Department of Defense. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless amended. Packaging, identification, and marking of the nuts are governed by specific DLA requirements including RP001, RQ011, and RQ017, ensuring proper handling and traceability. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses such as batteries, fluorescent lamps, sensors, weapons systems, or specified reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The delivery schedule requires fulfillment within 59 days after contract award, with performance taking place in Tracy, California. The solicitation was posted on July 13, 2026, with responses due by July 21, 2026, and is procured as fully competitive under a federal specification. Primary point of contact is Ashley Sacolick via email at ashley.sacolick@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 165 units of a screw, cap, socket head, self-locking, identified by NSN 5305-00-940-9531, under solicitation SPE4A6-26-T-05PC, with a delivery requirement of 146 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and the item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. All units must be physically marked in accordance with MIL-STD-130N for identification, and government identification must be removed from non-accepted supplies. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are classified with verification levels or AQLs as specified. Thread dimensions for Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small internal and external threads. Cybersecurity compliance requires CMMC Level 2 self-assessment, and third-party assessments must be performed by a certified C3PAO. The solicitation is fully competitive under military specification, with drawings available only during the open solicitation period via the DIBBS portal, and performance is to be delivered to San Diego, CA. The primary point of contact is Lisa Harvie of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details