Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, LOCK

Active
SPE7M2-26-T-6030Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 64,020 washer, lock items identified by NSN 5310-01-145-4564 under solicitation SPE7M2-26-T-6030, with delivery required within 161 days to the DLA Distribution Anniston facility in Anniston, Alabama. The item is classified as a commercial item and must comply strictly with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, with preservation method code 10 allowing packaging per ASTM D3951. Packaging must avoid mercury or mercury compounds in all stages including preservation, packaging, and marking, with exceptions only for functional uses in batteries, lighting, instruments, weapon systems, or specific reagents as defined by NAVSEA, and portable devices containing mercury must have shockproof construction with a secondary containment barrier. All supplies must be delivered FOB origin with zero variance allowed in quantity, inspected and accepted at destination, and palletized according to DLA standards. The contract includes a strict prohibition on the intentional introduction of mercury in any component or material, enforced through the DLA Master List of Technical and Quality Requirements referenced in the document. The delivery deadline is June 25, 2027, with a needed ship date of January 26, 2027, and unit pricing is set at a total contract value derived from the quantity and unit cost. The procurement is managed by the Department of Defense’s Nuclear Reactor Program, with point of contact David Larsen at DLA.

General Info

Procure 64,020 washers, no mercury, DLA packaging, FOB origin, deliver by June 25, 2027.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

7 FRANKFORD AVE BLDG 362, ANNISTON, AL, 36201-4199, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-T-6030 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,LOCK
WASHER, LOCK
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NASM35333 REVISION NR 5 DTD 02/29/2024 PART PIECE NUMBER: MS35333-154
TDP Rev A Gen 1 IAW REFERENCE UNK FF-W-100C(1) NOT 2 REVISION NR C DTD 09/10/2018 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017685268 0001 EA 64,020.000
NSN/MATERIAL:5310011454564
SPE7M2-26-T-6030
SECTION B
PR: 7017685268 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0161
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION METHOD CODE 10: ITEMS MAY BE PACKAGED IAW ASTM D3951 STANDARD PRACTICE FOR COMMERCIAL PACKAGING.
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3120
DLA DISTRIBUTION ANNISTON
TRANS OFFICER 256-676-2894
7 FRANKFORD AVE BLDG 362
ANNISTON AL 36201-4199
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3120
DLA DISTRIBUTION ANNISTON
TRANS OFFICER 256-676-2894
7 FRANKFORD AVE BLDG 362
ANNISTON AL 36201-4199
US
Need Ship Date:01/26/2027 Original Required Delivery Date:06/25/2027
SPE7M2-26-T-6030 NSN/Part Number: 5310-01-145-4564 Quantity: 64,020 EA Purchase Request: 7017685268QTY: 64020 Delivery: 161 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
Brake, Segmented Rotor Manufacturing and SupplyThe contract entails the manufacture and supply of a Brake, Segmented Rotor classified under NSN 2530015567155 under an IDIQ framework with FOB origin delivery terms, ensuring all products are shipped directly from the manufacturer's location without additional freight costs borne by the government. Compliance is strict and mandatory across military packaging, labeling, and hazardous materials handling standards to meet Department of Defense requirements for readiness and safety during transport and storage. The procurement is structured as a total small business set-aside under FAR 19.5, exclusively available to small businesses certified by the SBA, and assigned the NAICS code 336390 which covers other transportation equipment manufacturing. The solicitation was posted on August 5, 2026, with a response deadline of August 20, 2026, issued by the Strategic Acquisition Program Directorate under the Department of Defense, and all offers must be submitted through the designated DIBBS portal to be considered valid.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
Windshield Wiper Blade Supply and ManufacturingThe contract is for the manufacture and supply of two units of windshield wiper blades, each 19 inches in length, with part number F42706 and NSN 2540012811122, all of which must fully comply with the technical and quality standards established by the Defense Logistics Agency. The work is classified as a subcontract under NAICS code 336390, indicating it falls within the automotive parts manufacturing sector, and is issued under the authority of the Department of Defense through LSO Combat Vehicles and Armament. Performance of the contract is required at Aberdeen Proving Ground, Maryland, with a ZIP code of 21005-5001, ensuring alignment with military logistics and operational needs. The solicitation was posted on August 5, 2026, and responses must be submitted by August 17, 2026, providing a twelve-day window for qualified vendors to propose their capabilities and pricing. The contract is facilitated through the DIBBS platform, with the official solicitation accessible via the provided link. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors without preference for small businesses or other categories. Compliance with DLA’s exacting specifications is paramount to ensure the blades meet the durability, performance, and safety demands of military vehicles in operational environments.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
Vehicular Maintenance Kit Manufacturer or DistributorThe contract calls for the supply and delivery of a Vehicular Maintenance Kit with the National Stock Number 4910016835478, encompassing all necessary components, packaging, and labeling in full compliance with military standards. The item is a critical support element for vehicle maintenance operations and must meet rigorous defense specifications to ensure reliability and interoperability in operational environments. The requirement is structured as a subcontract and is exclusively reserved for Service-Disabled Veteran-Owned Small Businesses, as indicated by the SDVOSBC set-aside classification, ensuring procurement opportunities for qualified veteran-owned enterprises. The solicitation is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with a posted date of August 5, 2026, and a response deadline of August 20, 2026. The manufacturing or distribution activity must align with NAICS code 336390, which pertains to other transportation equipment manufacturing, reflecting the specialized nature of the kit’s production. Performance of the contract will occur at an unspecified location, and all submitted proposals must demonstrate capability to deliver a fully compliant kit that meets or exceeds DoD quality and readiness benchmarks. The official solicitation window is accessible via the DIBBS platform using the provided link.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-T-5010
This contract is for the procurement of one refrigeration compressor, identified by NSN 4130-01-578-8370 and purchase request 7017756959, with a total quantity of 19 units to be delivered in two line items—one unit and eighteen units respectively. All items must be delivered FOB origin within 137 days of the required delivery date of March 9, 2027, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must conform to ASTM D3951, subject to the overriding requirements of the DLA Master List of Technical and Quality Requirements. Packaging and labeling must comply with MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the hardware except for functional uses in batteries, fluorescent lamps, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Two delivery addresses are specified: one for Albany, Georgia, and another for Barstow, California, each with designated receiving points. Transportation procedures follow DLAD Proc Notes C19 and C20. The solicitation, issued under contract SPE8E8-26-T-5010, is a Service-Disabled Veteran-Owned Small Business Set-Aside with a response deadline of August 17, 2026, and is managed by the Department of Defense through the Albany Transportation Officer.
ALBANY TRANSPORTATION OFFICER

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
ARM ASSEMBLY, PIVOT,
Solicitation # SPE7L1-26-T-921D
The item is an ARM ASSEMBLY, PIVOT, manufactured using a forging process that requires specialized tooling for production. The specification references Drawing 12473354, Revision H, dated 31 Jan 2018, with Note 6 mandating induction hardening per SAE-AMS 2745, identifying Advance Heat Treat Corp and LOC Performance Products as approved sources. The Defense Logistics Agency requires compliance with DLA packaging standards and strict export control protections under ITAR or EAR regulations, prohibiting any disclosure or transfer of technical data to foreign persons without prior government authorization. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA. The National Stock Number is 2530-01-588-7026, with a quantity of 47 units required under Purchase Request 7016888404, and delivery must be completed within 91 days of award. The solicitation SPE7L1-26-T-921D is a total small business set-aside under NAICS code 336390, issued by the Department of Defense’s Land Supply Chain, with responses due by August 17, 2026. Primary point of contact is Adam Howell, reachable via email and phone provided. Performance is to occur in New Cumberland, PA, with export compliance and cybersecurity certification requirements enforced through DLA protocols.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
BRAKE, SEGMENTED ROTOR
Solicitation # SPE7LX-26-U-9296
The contract solicitation SPE7LX-26-U-9296 seeks the procurement of 141 units of a segmented brake rotor, identified by NSN 2530-01-556-7156 and part number RDA-1550-951 from Meritor Heavy Vehicle Systems, LLC. This is a commercial item acquisition under a Total Small Business Set-Aside, with delivery required 145 days after award and FOB Origin terms applying, meaning the contractor bears all transportation costs and risks until the item reaches the designated destination. The contract specifies a guaranteed minimum quantity of 21 units and an estimated annual quantity of 141 units, with a maximum contract value of $350,000. Inspection and acceptance both occur at the destination, and items must be individually packaged per QUP=001 with packaging adhering to MIL-STD-2073-1E and DLA’s RP001 standards. All bare metal surfaces, moving parts, and threads must be protected using preservative code 89 to prevent corrosion, unless prohibited by operational incompatibility, difficulty of removal, or potential damage to the item. Packaging must include wrapping material GC to prevent abrasion and corrosion, and cushioning/dunnage material AD—such as solid fiberboard or rigid foam conforming to specified military and ASTM standards. Blocking and bracing must immobilize items within containers, with wood and plywood meeting strict ASTM and A-A-55057 specifications and engineered for easy removal. Marking must comply with MIL-STD-129, including barcoding and the special marking code ZZ specifying “ARROW UP OPEN THIS SIDE.” The contract incorporates extensive cybersecurity and compliance requirements, including DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, 252.204-7018 prohibiting acquisition of telecommunications equipment from designated foreign entities, and 252.223-7008 banning hexavalent chromium. Contractors must hold active UEI and CAGE codes, affirm small business status, and comply with whistleblower protections, former DoD official compensation rules, and hazardous material handling standards. Invoicing is mandatory through Wide Area WorkFlow, and payment acceleration is required for small business subcontractors. All technical and quality requirements are governed by the DLA Master List, with revisions effective
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
RING, STUB YOKE
Solicitation # SPE7LX-26-U-9334
The contract pertains to the procurement of RING, STUB YOKE, identified by NSN 2530-21-906-4056 and part numbers 10513407 and 2402-8217.01, with a total quantity of 326 units to be delivered FOB origin within 102 days. The item is classified as a critical application item under a DLA direct, CONUS procurement, with no tolerance for quantity variance—exact delivery of 326 units is required. Packaging must strictly adhere to DLA’s packaging requirements, specifically RP001, and comply with MIL-STD-129 for marking and labeling; if the item is not hazardous per FED-STD-313, commercial packaging per ASTM D3951 is acceptable, but only if it does not conflict with any DLA Master List technical or quality requirements, which take full precedence. The item must be palletized according to RP001 and is subject to inspection and acceptance at the destination. The solicitation number is SPE7LX-26-U-9334, issued by the Strategic Acquisition Program Directorate under the Department of Defense, with a response deadline of August 20, 2026, and the primary point of contact is Theodore Misiolek. The unit of issue is each (EA), and the contract specifies the DLA authorized unit of issue, with reference provided for ANSI X12 conversion.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
HEADLIGHT
Solicitation # SPE8E9-26-Q-0659
The contract pertains to the procurement of 12 units of headlight assembly identified by NSN 6220-01-632-0311 under purchase request 7016375446, with a delivery requirement of 168 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision current on the RFP issue date unless amended, in which case the amendment date governs. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), and any non-accepted supplies must have government identification removed as per RQ011. The solicitation, open for response until August 12, 2026, was posted on August 5, 2026, under solicitation number SPE8E9-26-Q-0659, and is issued by the Department of Defense through the Construction & Equipment MRO Service I office, with Quiana Bowser designated as the primary point of contact for inquiries.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336390
New
DIBBS
TRAY, STOWAGE, VEHICULAR
Solicitation # SPE7L4-26-T-6014
The contract is for the procurement of nine vehicular tool stowage trays identified by NSN 2540-01-606-3670 under solicitation SPE7L4-26-T-6014, with a required delivery within 140 days of award. The item is governed by multiple technical and quality requirements incorporated from the DLA Master List, including packaging standards, export control of technical data subject to ITAR or EAR, and compliance with Qualified Products or Manufacturers Lists for components. Export-controlled technical data may only be accessed by contractors with approved US/Canada Joint Certification Program certification, completed DOD training on handling controlled data, and formal approval from DLA. Removal of government identification from non-accepted supplies is mandated, and all requirements are subject to the revision of the DLA Master List in effect on the solicitation issue date. The purchase is issued by the Department of Defense’s LSO Combat Vehicles and Armament office, with performance location in Tracy, California, and primary point of contact listed as Anna-Rachelle Betts. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 336390 for other transportation equipment manufacturing.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
TRANSFER ASSEMBLY
Solicitation # SPE7L4-26-T-5991
DLA has issued a procurement contract under solicitation SPE7L4-26-T-5991 for the transfer assembly with NSN 2540-01-412-7836, requiring five units to be delivered within 20 days of award. The delivery is FOB destination, with no variance allowed in quantity, and inspection and acceptance occur upon arrival at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, overriding ASTM D3951, and must conform to MIL-STD-129 labeling and RP001 packaging standards. Hazardous materials must follow TQ requirement IP025 per FED-STD-313; non-hazardous items must be commercially packaged accordingly. All packaging must specify the correct Unit of Issue and Quantity per Unit Pack as stipulated. The delivery address is APO AE 09494-4640, with an alternate freight shipping address at RAF Fairford, Gloucester, UK, and transportation must adhere to DLAD PROC NOTES C19 and C20. The contract mandates the removal of government identification from non-accepted supplies and requires packaging to be palletized per RP001. The original required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and the primary point of contact is Anna-Rachelle Betts, reachable via DLA email and phone. The NAICS code is 336390, and this is a federal procurement under the Department of Defense for Combat Vehicles and Armament.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
EQUIPMENT KIT, VEHIC
Solicitation # SPE7L3-26-T-150B
The contract pertains to the procurement of two units of an Equipment Kit, Vehicle, identified by NSN 2541-01-727-9469, under solicitation SPE7L3-26-T-150B, with a response deadline of August 17, 2026, and a required delivery window of 219 days after award. Full and open competition is authorized, and the acquisition falls under NAICS code 336390, managed by the Department of Defense's Land Supplier Operations Vehicle Support. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue or award date depending on the acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed. The use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification language, and substitutes require prior approval unless explicitly permitted by the specification. Additionally, all supplied items must be completely free of asbestos; any parts previously containing asbestos are unacceptable, and alternative materials must be approved under Clause L30 and Provision 4 conditions. The point of contact for inquiries is Kayla Buchanan, reachable via email or phone, with performance designated for New Cumberland, Pennsylvania, 17070-5002.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
COMPRESSOR, REFRIGERATI
Solicitation # SPE8E8-26-T-4979
The contract specifies the procurement of a refrigeration compressor under NSN 4130-01-439-2870 and part number ET210L-25073C, supplied by Climate Control Inc of Decatur IL, with a quantity of 40 units to be delivered FOB origin within 71 days of the contract date. The unit price is $40.00 per unit, resulting in a total contract value of $1,600.00, with no allowance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrapping, and container requirements, and must be marked in accordance with MIL-STD-129 without special marking codes. Delivery is directed to the DLA Distribution facility at New Cumberland, PA, with the same address used for both freight shipping and parcel post. Inspection and acceptance occur at the destination, and the item is subject to DLA packaging and technical requirements referenced via the DLA Master List of Technical and Quality Requirements. The contract is tied to solicitation SPE8E8-26-T-4979, with a response deadline of August 17, 2026, and an original required delivery date of December 14, 2026. The procurement falls under NAICS code 336390 and is managed by the Department of Defense via the DDSP New Cumberland Facility, with Alexis Selby as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 331110
New
DIBBS
Corrosion-Resistant Stainless Steel Sheet Supply
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332312
New
DIBBS
Structural Steel FabricationThe contract titled Structural Steel Fabrication is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, and falls under the NAICS code 332312 for structural metal fabrication. It requires the fabrication of structural steel members including beams, columns, and connections strictly in accordance with specified design requirements. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, and the work is to be performed at a location in San Diego with the ZIP code 92136-3581. The contracting activity is associated with the Nuclear Reactor Program under the Department of Defense, and the procurement is accessible through the DIBBS platform for eligible small business contractors to respond.
Fabricated Structural Metal Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete SupplyThe contract titled Ready-Mix Concrete Supply is a small business set-aside solicitation under the SBA Total Small Business Set-Aside program, designated for NAICS code 327320 which pertains to concrete product manufacturing. It requires the production and on-site delivery of specific concrete mixes as needed for construction activities within the designated performance location in San Diego, California, with ZIP code 92136-3581. The opportunity is issued by the Nuclear Reactor Program under the Department of Defense and is structured as a subcontract. The solicitation was posted on August 5, 2026, with responses due by August 14, 2026. All offerors must be certified small businesses eligible under the set-aside guidelines, and performance is confined to the specified site where the concrete materials must be properly placed and integrated into ongoing infrastructure or facility work.
Ready-Mix Concrete Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 484220
New
DIBBS
Freight and Heavy Haul TruckingThis contract is for the transportation of oversized and heavy construction equipment and materials to a designated site in San Diego, California, under a Small Business Set-Aside designation, meaning only qualifying small businesses are eligible to bid. The solicitation falls under NAICS code 484220, which covers specialized freight trucking services, and is classified as a subcontract within the Department of Defense’s Nuclear Reactor Program. The opportunity was posted on August 5, 2026, with a response deadline of August 14, 2026, and the place of performance is specified as 92136-3581 in San Diego. Bidders must meet federal small business size standards and be prepared to handle logistics for large, non-standard cargo requiring specialized hauling capabilities, with all operations centered on delivering critical components to the designated location in support of defense-related infrastructure projects.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541620
New
DIBBS
Environmental Remediation ServicesThe contract titled Environmental Remediation Services seeks subcontracting support for soil and groundwater assessment, hazardous material abatement planning, and regulatory compliance activities associated with nuclear reactor program operations. It is issued under a Total Small Business Set-Aside as defined by FAR 19.5, ensuring eligibility is restricted to small business concerns certified by the Small Business Administration. The North American Industry Classification System code 541620 identifies the scope as environmental consulting and remediation services, requiring specialized technical expertise in contaminant characterization, remediation strategy development, and adherence to federal and state environmental regulations. The performance location is designated as San Diego, California, with a zip code of 92136-3581, indicating the work will be conducted at or near a Department of Defense facility involved in nuclear reactor operations. The solicitation was posted on August 5, 2026, with proposals due by August 14, 2026, and interested parties must respond through the DIBBS platform using the reference number SPE7M226Q0723.
Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Site LayoutThe contract titled Surveying and Site Layout is a small business set-aside subcontract under the NAICS code 541370, reserved exclusively for small businesses as defined by the SBA. It was posted on August 5, 2026, with a response deadline of August 14, 2026, and is administered by the Nuclear Reactor Program under the Department of Defense. The work requires comprehensive topographic surveys, boundary verification, and precise stakeout services to support construction layout activities. All services must be performed at the designated place of performance in San Diego, California, with the postal code 92136-3581. The solicitation is accessible via the DIBBS portal, and all submissions must comply with the terms of a total small business set-aside under FAR 19.5, ensuring that only eligible small business entities may bid or perform under this agreement.
Surveying and Mapping (except Geophysical) Services

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 237310
New
DIBBS
Paving and Asphalt WorkThe contract involves grading, base preparation, and asphalt paving for roads, parking lots, or airfields under a Total Small Business Set-Aside, restricted exclusively to small businesses as defined by the SBA. It is classified under NAICS code 237310 and issued by the Department of Defense under the Nuclear Reactor Program, with performance required in San Diego, California, specifically at ZIP code 92136-3581. The solicitation was posted on August 5, 2026, and responses are due by August 14, 2026. This is a subcontract opportunity, meaning the winning entity will be working under a prime contractor rather than directly with the government. The project demands precision in site preparation and paving to meet military or defense infrastructure standards, and bidders must be certified small business concerns eligible under FAR 19.5.
Highway, Street, and Bridge Construction

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238110
New
DIBBS
Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement involves the full scope of activities related to forming, reinforcing, pouring, and finishing both structural and architectural concrete elements for a project under the Nuclear Reactor Program within the Department of Defense. It is issued as a subcontract with a Total Small Business Set-Aside designation, meaning only small businesses as defined by the Small Business Administration are eligible to respond. The North American Industry Classification System code 238110 applies, indicating a classification within the concrete work specialty trade. Performance of the work is required at a site in San Diego, California, with a zip code of 92136-3581. The solicitation was posted on August 5, 2026, and responses must be submitted by August 14, 2026, with no point of contact specified. The opportunity is accessible through the DIBBS platform via a public link for interested contractors.
Poured Concrete Foundation and Structure Contractors

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping SystemsThe contract is for the installation of potable water, sanitary sewer, and storm drainage systems within buildings or facilities under a subcontract arrangement set aside entirely for small businesses as defined by the SBA. It falls under NAICS code 238220 for plumbing, heating, and air-conditioning contractors and is managed by the Nuclear Reactor Program within the Department of Defense. The opportunity was posted on August 5, 2026, with responses due by August 14, 2026, and performance is required at a location in San Diego, California with a zip code of 92136-3581. All work must comply with applicable standards for municipal infrastructure systems and is intended to support critical defense facilities. The solicitation is accessible through the DIBBS platform for eligible small business contractors.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561730
New
DIBBS
Erosion and Sediment ControlThe contract pertains to erosion and sediment control measures required during construction activities, specifically involving the installation of silt fences, erosion blankets, and other stormwater management systems. It is issued as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 561730 indicating it falls under waste collection and treatment services. The solicitation was posted on August 5, 2026, with responses due by August 14, 2026, and is managed by the Nuclear Reactor Program under the Department of Defense. All work must be performed at the designated location in San Diego, California, with a zip code of 92136-3581, and the contractor is expected to ensure compliance with environmental standards to prevent sediment runoff and manage stormwater effectively throughout the project lifecycle.
Landscaping Services

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561990
New
DIBBS
Temporary Traffic ControlThe contract is for temporary traffic control services including the installation and maintenance of signage, cones, barriers, and flagging to ensure work zone safety, classified under NAICS code 561990 as a total small business set-aside under FAR 19.5. It is a subcontract opportunity issued by the Nuclear Reactor Program under the Department of Defense with a performance location in San Diego, California, specifically at zip code 92136-3581. The solicitation was posted on August 5, 2026, and responses are due by August 14, 2026, with all proposals required to come from qualified small businesses as defined by the SBA. The work involves deploying and managing safety infrastructure to protect workers and the public during construction or maintenance activities in high-traffic or hazardous areas, requiring strict adherence to safety standards and timely execution. The opportunity is accessible through the DIBBS system via the provided link.
All Other Support Services

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and WiringThe contract titled Electrical Installation and Wiring is a subcontract under a Total Small Business Set-Aside, designated for firms certified as small businesses by the SBA, and falls under NAICS code 238210 for electrical contracting. It requires the installation of comprehensive electrical systems including wiring, conduits, panels, and lighting fixtures for commercial or infrastructure projects within the Department of Defense’s Nuclear Reactor Program. The solicitation was posted on August 5, 2026, with a response deadline of August 14, 2026, and the work must be performed at a specified location in San Diego, California, with a zip code of 92136-3581. All eligible small business contractors must submit proposals by the deadline to be considered for award, with performance focused on meeting the technical and safety standards required for defense-related electrical infrastructure.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 18 hours ago

DEADLINE

in 8 days
View Details