Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, LOCK

Active
SPE4A6-26-T-10FKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 3,334 lock washers identified by NSN 5310-01-067-9589 and part number MS35338-137, governed by technical standards NASM35338 Revision 5 and ASME B18.21.1, with strict compliance required to DLA packaging and marking specifications including MIL-STD-2073-1E and MIL-STD-129. The item is classified as a critical application component, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware except for specific functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents as authorized by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs per established criteria. Deliveries are split between two locations—Albany, GA and Barstow, CA—with a total quantity divided into two CLINs for 678 and 2,656 units respectively, each subject to a 146-day delivery window from origin, FOB origin, and zero quantity variance. Inspection and acceptance occur at destination, packaged in accordance with DLA packaging requirements and palletized as mandated. The original required delivery date is March 13, 2027, with need ship dates of July 29, 2026 for Albany and March 11, 2028 for Barstow, indicating phased fulfillment. All items must be marked with no special markings as per code 00-00, and transportation logistics follow DLA procedural notes C19 and C20. The solicitation number is SPE4A6-26-T-10FK, issued under a federal acquisition, with technical and quality requirements linked to the DLA Master List and the point of contact is Daniel Fink.

General Info

3,334 lock washers, NSN 5310-01-067-9589, FOB origin, delivered to Albany and Barstow by 2027–2028, zero defects, DLA packaging, no mercury.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

814 RADFORD BLVD BLDG 1221 DOOR 20, ALBANY, GA, 31704-1128, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
DANIEL FINK
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,LOCK
WASHER, LOCK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev C Gen 3 IAW BASIC NON GOVT STD NASM35338 REVISION NR 5 DTD 08/31/2025 PART PIECE NUMBER: P/N MS35338-137
TDP Rev C Gen 3 IAW REFERENCE NON GOVT STD ASME B18.21.1 REVISION NR DTD 01/01/2009
SPE4A6-26-T-10FK
SECTION B
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017673196 0001 EA 678.000
NSN/MATERIAL:5310010679589
DELIVERY (IN DAYS):0146
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY
TRANSPORTATION OFFICER
814 RADFORD BLVD BLDG 1221 DOOR 20
ALBANY GA 31704-1128
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY DDAG-T
MCLB BLDG 1221 DOOR 20
814 RADFORD BLVD
ALBANY GA 31704-1128
US
SPE4A6-26-T-10FK
SECTION B
PR: 7017673196 PRLI: 0001 CONT’D
Need Ship Date:07/29/2026 Original Required Delivery Date:03/13/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017673196 0002 EA 2,656.000
NSN/MATERIAL:5310010679589
DELIVERY (IN DAYS):0146
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:BL OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PKGING DATA MIL-STD-2073-1E QUP:050 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:BL OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3215
DLA DISTRIBUTION BARSTOW
CENTRAL RECEIVING WHSE 7
REC OFFICER 442-295-4148
SPE4A6-26-T-10FK
SECTION B
PR: 7017673196 PRLI: 0002 CONT’D
BARSTOW CA 92311-5014
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3215
DLA DISTRIBUTION BARSTOW
CENTRAL RECEIVING WHSE 7
REC OFFICER 442-295-4148
BARSTOW CA 92311-5014
US
Need Ship Date:03/11/2028 Original Required Delivery Date:03/13/2027
SPE4A6-26-T-10FK NSN/Part Number: 5310-01-067-9589 Quantity: 678 EA Purchase Request: 7017673196QTY: 3334 Delivery: 146 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Flat WashersThe contract mandates the manufacture of 950 flat washers per delivery order in full compliance with NSN 5310-01-532-5236 specifications, requiring strict adherence to defined material composition, dimensional tolerances, and surface finish requirements. All production must meet the technical and quality standards established by the Defense Logistics Agency, ensuring every component is manufactured to military-grade precision and reliability. The scope is focused exclusively on producing these washers under a subcontract arrangement, with no flexibility in design or material substitution. This is a total small business set-aside under the Small Business Administration guidelines, specifically designated for businesses classified under NAICS code 332722, which covers screw, nut, and bolt manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Performance is expected to align with DLA’s logistical and quality assurance frameworks, though the precise delivery location is unspecified. Bidders must be certified small businesses eligible under FAR 19.5 to qualify for award.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE7MC-26-T-158P
DDSP NEW CUMBERLAND FACILITY

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE7L5-26-T-4656
The contract pertains to the procurement of 16 units of an insert with screw thread, identified by NSN 5325-01-614-5590 and part number 14001411, supplied by SOS-FAIRBANKS MORSE. The item is governed by technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging standards, removal of government identification from non-accepted supplies, and physical identification or bare item marking. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances in the sample lot unless otherwise stated, and manufacturers may choose attribute or variable inspection under MIL-STD-1916. The solicitation number is SPE7L5-26-T-4656, posted on July 29, 2026, with a response deadline of August 6, 2026. The contracting agency is the Department of Defense through Land Supplier Operations Engines, with performance located in San Diego, California, 92136-5299. Delivery is required within five days of award, and the primary point of contact is Christopher Walker, reachable via email and phone provided.
LAND SUPPLIER OPNS ENGINES

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PARTS KIT, FASTENER
Solicitation # SPE4A7-26-Q-0923
The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A1-26-T-2496
The contract is for the procurement of 362 flat washers identified by NSN 5310-00-543-4804 and part number CVC754-548D17, supplied by Triumph Aerospace Structures, LLC. The item is classified as a critical application product, and no approved technical data package is currently available, rendering the specification proprietary or insufficient for competitive sourcing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 and MIL-STD-129, subject to precedence by DLA requirements, and palletization must follow RP001 guidelines. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional uses in batteries, instruments, or weapon systems, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise directed. The certificate of conformance is authorized unless suspended by a quality assurance letter. Delivery is FOB origin with a 146-day lead time, inspection and acceptance occur at destination, and the quantity variance is strictly zero percent. Packaging and labeling must reflect the specified unit of issue and quantity per unit pack, with all shipments directed to DLA Distribution Depot Hill in Hill AFB, Utah, under DLA transportation protocols. The original required delivery date is August 11, 2019, with a needed ship date of July 12, 2019.
AVIATION SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-10GA
The contract pertains to the supply of 167 machine bolts identified by NSN 5306-01-096-5593 under solicitation SPE4A6-26-T-10GA, a HUBZone set-aside issued by the Department of Defense’s ASC Commodities Division. Delivery is due in 559 days from award, and the contractor is required to perform first article testing on one unit of the item, submitting a formal test report within 60 calendar days of contract execution. The contractor must provide written notice at least 14 days before shipping the tested unit for government final acceptance testing and ensure all documentation—including test results, material certifications, and manufacturing drawings—is included with the submission. The government has 60 days after receiving the report to approve, conditionally approve, or disapprove the first article. Production lot testing follows first article approval, requiring the contractor to deliver one randomly selected sample from the production lot to the Redstone Technical Test Center under strict labeling and documentation requirements, including signed forms, traceable shipping records, and a prepaid return label. The contractor must also account for and price the cost of samples consumed during government testing. The contract prohibits Fast Pay terms and mandates that all testing, inspection, and documentation comply with FAR 52.209-3 and its alternate clause, as well as specific procurement notes referencing supplemental first article and production lot testing protocols. Shipment of production samples must be clearly marked, accompanied by full technical and quality assurance records, and delivered to the designated government testing facility. The contractor is responsible for asserting proprietary rights on documentation and ensuring all material and process certifications are current and accurate. The solicitation requires disclosure of the current dealer or distributor and their certification status, emphasizing compliance with equivalent standards. The point of contact for inquiries is Tyler Greene, and the contract is subject to government oversight through the Quality Assurance Representative. All activities must align with the technical data package and applicable military standards including MIL STD 129 for labeling.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L1-26-T-889U
The contract pertains to the procurement of a CAP, FILLER OPENING with NSN 5340-01-371-2617 and part number 695155-1, under solicitation SPE7L1-26-T-889U, with a total quantity of 13 units to be delivered in 161 days from the award date, with delivery terms FOB origin and inspection and acceptance points at the destination. The item is classified as a commercial item, and unit identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified as VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. The supplier must meet all applicable DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and with RP001 for DLA packaging, requiring commercial packaging under ASTM D3951 unless the item is hazardous under FED-STD-313, in which case IP025 applies. Palletization must follow DLA guidelines, and the delivery address is DLA Distribution Warner Robbins, Robins AFB, GA. The contract is a total small business set-aside under NAICS code 332722, with a response deadline of August 10, 2026, and the required ship date is January 19, 2027. Documentation for source approval must be submitted per RC001, and all technical, quality, and packaging requirements are binding and take precedence over any conflicting commercial standards.
LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, INTERNAL WRENC
Solicitation # SPE4A6-26-T-10GQ
This contract specifies the procurement of internal wrenching bolts under solicitation SPE4A6-26-T-10GQ, with a total quantity of 7,178 units and a unit price of $7,178.00, resulting in a total contract value of approximately $51.5 million. The part number is 5306-01-278-3992, and delivery is required within 121 days from the award date, with FOB origin terms and inspection and acceptance occurring at the destination. The product must comply with stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit packaging specified in the contract and palletization following specified guidelines. The item is designated as a Critical Application Item, requiring strict adherence to configuration control and engineering change procedures. Sampling inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise stated, and critical, major, and minor attributes are assigned specific verification levels or AQLs. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all documentation must include proper identification and marking per RQ017. The contract is reserved for Economically Disadvantaged Women-Owned Small Businesses under NAICS code 332722, and delivery must be made to DLA Distribution Depot Hill in Hill AFB, Utah.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, TAPPING
Solicitation # SPE7LX-26-U-9079
This contract specifies the procurement of TAPPING SCREWS under NSN 5305-01-336-9467 with a total quantity of 48 packing units PG, each containing 50 screws, as defined by the updated unit of issue effective March 1, 2023. The item is identified by DAIMLER TRUCK NORTH AMERICA LLC part number 23-11657-306 and is being procured under solicitation SPE7LX-26-U-9079 as a Total Small Business Set-Aside. Delivery is required within 90 days FOB origin with no variance permitted in quantity and inspection and acceptance to occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and intermediate containment, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and verification protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise stated, and critical, major, and minor attributes must be assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The Certificate of Conformance procedure is authorized unless overridden by a Quality Assurance Letter of Instruction, and non-accepted supplies must have government identification removed. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition type.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SETSCREW
Solicitation # SPE4A6-26-T-10FS
This contract specifies the procurement of a set screw with detailed technical and packaging requirements. The item is a steel screw with dimensions 0.500-13 UNC-2A x 1.500 LG, cataloged under NSN 5305002638388 and referenced by specification FF-S-200 and Revision E dated 04/03/2025. Two units are required under Purchase Request 7017673356, with delivery due in 20 days FOB origin, no variance allowed in quantity, and inspection and acceptance occurring at the point of origin. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry conditions, and packaging level B, with marking adhering strictly to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA packaging standards, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, packing, and marking, with limited exceptions for functional applications like batteries or specialized instruments governed by NAVSEA 5100-003D, which also mandates shock-proof design and secondary containment for portable mercury-containing devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in sample lots unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the revision effective on the solicitation issue date controlling for simplified acquisitions. The item is to be delivered to the Ordnance Readiness Development Center in Jiji Township, Nantou County, Taiwan, with transportation governed by DLA procedural notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-10FS, with a response deadline of August 6, 2026, and the original required delivery date is August 3, 2026. Contract administration is managed by the Department of Defense’s ASC Commodities Division, with primary point of contact Daniel Fink.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A0-26-T-4088
This contract specifies the procurement of a machine screw with part number 12542766 and NSN 5305-01-716-2546, requiring exactly three units delivered within five days of order placement under solicitation SPE4A0-26-T-4088. The item is source-controlled and must be manufactured and tested in accordance with limited rights data that only approved vendors possess; vendors without direct access to this data or traceability to approved sources are not eligible to quote. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special marking code. The screw is not subject to shelf life restrictions, and item unique identification is explicitly waived per DFARS 252.211-7003(c)(1)(i). Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Delivery is FOB origin to a U.S. military installation in Dongducheon, South Korea, with inspection and acceptance occurring at the destination. All supplies must be palletized per DLA guidelines, and shipping is governed by specific DLA procedures C19 and C20. The supplier must be source-approved, and a SAR package is required for new vendors seeking approval. The original required delivery date is July 24, 2026, with the solicitation posted on July 29, 2026, and responses due by August 6, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT , SELF-LOCKING, PL
Solicitation # SPE4A0-26-T-4091
The contract specifies the procurement of two self-locking plate nuts, part number MS21060L6, with NSN 5310-00-779-6633, under solicitation SPE4A0-26-T-4091. These items are classified as critical application components and must comply with technical and quality standards referenced in the DLA Master List, including NASM21060 Revision 3 and NASM25027 Revision 1, with quality assurance provisions EQ003 and QAP-13873 governing inspection and verification. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be assessed at specified verification levels or AQLs. Packaging and marking are mandated to adhere to MIL-STD-2073-1E and MIL-STD-129, with prohibition of mercury or mercury compounds in all packaging operations. The items must be delivered FOB origin within five days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Delivery is directed to Naval Air Station North Island in San Diego, California, with specific freight and parcel post instructions excluding parcel post in favor of traceable shipping methods. The contract includes detailed logistical parameters such as unit of issue, packaging codes, container specifications, and identification codes for government use. The required delivery date is May 14, 2026, and the contract was posted with a response deadline of August 6, 2026. The purchasing organization is the Department of Defense’s Aviation Supply Chain ESOc Buys, coordinated by Danita Davis, and the procurement falls under NAICS code 332722 for screw machine product manufacturing. All items must meet DLA packaging requirements RP001 and special marking conditions indicate no additional special markings are required.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.
Other Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423690
New
DIBBS
Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.
Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details