Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WASHER, LOCK

Active
SPE7M2-26-T-5985Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of lock washers identified by NSN 5310-01-339-6531 under solicitation SPE7M2-26-T-5985, requiring full and open competition with no deviations or waivers permitted unless formally approved. The item must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must adhere to NASM35338 Revision 5 and ASME B18.21.1 Revision 9 specifications. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware except in explicitly allowed applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, and chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. The product is designated as a critical application item requiring strict configuration control and engineering change proposal procedures. The contract includes two delivery lines for a total quantity of 128 hardware units, with each line specifying a quantity of 11 and 117 units respectively, to be delivered in HD (hand) units under FOB origin terms, with zero tolerance for variance in quantity. Delivery must occur within 105 days from contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and ASTM D3951 standards with preservation method code 10, and marking must follow MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements. Shipments are directed to two DLA distribution depots: Hill AFB, Utah, and Robins AFB, Georgia, with defined freight and parcel post addresses provided. The need ship dates are December 1, 2026 and December 26, 2027, while the original required delivery date is March 27, 2027. The contract is managed by the Department of Defense’s Nuclear Reactor Program, with primary points of contact listed for inquiries. All items must satisfy the DoD-authorized unit of issue and related ANSI X12 standards as referenced by DLA.

General Info

Procurement of 128 lock washers per NSN 5310-01-339-6531, compliant with NASM35338 and ASME B18.21.1, no mercury, delivered to DLA depots by 2027.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(1)

SPE7M2-26-T-5985.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
David Larsen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,LOCK
WASHER,LOCK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NASM35338 REVISION NR 5 DTD 08/31/2025 PART PIECE NUMBER: NASM35338-51
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD ASME B18.21.1 REVISION NR 9 DTD 01/01/2009 PART PIECE NUMBER:
SPE7M2-26-T-5985
SECTION B
PR: 7017684859 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017684859 0001 HD 11.000
NSN/MATERIAL:5310013396531
DELIVERY (IN DAYS):0105
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION METHOD CODE 10: ITEMS MAY BE PACKAGED IAW ASTM D3951 STANDARD PRACTICE FOR COMMERCIAL PACKAGING.
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML 385-519-8103
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
SPE7M2-26-T-5985
SECTION B
PR: 7017684859 PRLI: 0001 CONT’D
Need Ship Date:12/01/2026 Original Required Delivery Date:03/27/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017684859 0002 HD 117.000
NSN/MATERIAL:5310013396531
DELIVERY (IN DAYS):0105
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION METHOD CODE 10: ITEMS MAY BE PACKAGED IAW ASTM D3951 STANDARD PRACTICE FOR COMMERCIAL PACKAGING. PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:O PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION METHOD CODE 10: ITEMS MAY BE PACKAGED IAW ASTM D3951 STANDARD PRACTICE FOR COMMERCIAL PACKAGING.
PARCEL POST ADDRESS:
SW3119
SPE7M2-26-T-5985
SECTION B
PR: 7017684859 PRLI: 0002 CONT’D
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:12/26/2027 Original Required Delivery Date:03/27/2027
SPE7M2-26-T-5985 NSN/Part Number: 5310-01-339-6531 Quantity: 11 HD Purchase Request: 7017684859QTY: 128 Delivery: 105 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Manufacturing and Supply of Critical Safety Item (CSI)
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-12LQ
This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-11PM
This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
COVER, PROTECTIVE, DU
Solicitation # SPE7L1-26-T-914F
The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11TF
The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11PN
The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-11RS
The contract specifies the procurement of 9 units of a socket head cap screw, self-locking, identified by NSN 5305007214734 and part number NAS1190E04P12N, with a unit price of $9.00 and a total price of $81.00. Delivery is required within 171 days to the DLA Distribution San Joaquin facility in Tracy, California, under FOB origin terms, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate containers, and marking per MIL-STD-129 with no special marking required. The hardware must conform to the current revision of the National Aerospace Standard, with previously applicable revisions accepted for prior production but not for new manufacturing post-solicitation. All items must adhere to strict technical and quality requirements referenced through the DLA Master List, including sampling protocols per MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specified verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited in the product and its packaging except for limited functional uses as defined, and all packaging materials must also be mercury-free. A Certificate of Quality Compliance is required, and identification marking must follow MIL-STD-130N unless otherwise specified. The contract includes all applicable CDRLs and is governed by DoD procurement standards, with the solicitation issued under SPE4A6-26-T-11RS and a response deadline of August 12, 2026.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BARREL
Solicitation # SPE4A6-26-T-11YC
The contract is for the procurement of 1,170 plain barrel nuts with NSN 5310-01-213-7628 under solicitation SPE4A6-26-T-11YC, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days of award, with responses due by August 12, 2026. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location, and applying equally to U.S. companies and their foreign subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the technical data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification, have completed required DOD export control training, and have passed the DLA Export-Controlled Technical Data Questionnaire. The contract also requires adherence to DLA packaging standards, CMMC Level 2 certification for third-party assessors, physical item marking specifications, configuration change management through Engineering Change Proposals, and any approved variances. The place of performance is New Cumberland, Pennsylvania, with primary point of contact Ashley Jones-Turner.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-11QZ
The contract pertains to the procurement of 523 retaining rings with NSN 5325-00-558-6947 under solicitation SPE4A6-26-T-11QZ, issued by the Department of Defense’s ASC Commodities Division. The requirement is fully competitive and governed by military or federal specifications, with delivery due within 49 days of award to Cherry Point, North Carolina, at ZIP code 28533-5040. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition type. The item is designated as critical, triggering the need for origin inspection and adherence to stringent packaging, marking, and identification standards including physical bare item marking and removal of government identification from non-accepted supplies. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and covered defense information provisions may be applicable. The point of contact for inquiries is Marchello Fields, reachable via phone or email provided in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-12FT
The contract specifies the procurement of a PIN-RIVET component designated as P/N HL413V-6-4, compliant with stringent military and aerospace standards including MIL-STD-130 for part marking, ASME Y14.5 for dimensions and tolerances, and ASME B46.1 for surface texture. Threads must conform to SAE AS8879, and lubrication is required per MIL-L-87132 Type I or III, with Cetyl Alcohol as an optional alternative to HI-SHEAR Spec 305. The part is subject to configuration management and documentation requirements tied to the DLA Master List of Technical and Quality Requirements, with specific controls for sourcing approval, packaging, and deviation requests. The item is classified as a Critical Application Item and must be marked per RQ017 with Government Identification retained unless non-accepted. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are verified at strict levels VII, IV, and II. The contract mandates packaging in accordance with MIL-STD-129 and ASTM D3951, with palletization meeting DLA Packaging Requirements RP001. Delivery is FOB Origin, with inspection and acceptance points at destination, and no quantity variance permitted. The required delivery date is January 31, 2027, with a 171-day lead time, and the item is to be shipped to DLA Distribution Depot Oklahoma at Tinker AFB. The Solicitation Number is SPE4A6-26-T-12FT, with 42 units priced at $42.00 each, totaling $1,764. The NSN is 5320-01-707-8438, and the award is open to approved suppliers including HI-SHEAR CORPORATION, SPS TECHNOLOGIES, LLC, WEST COAST AEROSPACE, INC., and HOWMET GLOBAL FASTENING SYSTEMS INC. All requirements are governed by federal acquisition protocols under the Department of Defense, with point of contact Paul Askew at DLA Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSI
Solicitation # SPE4A6-26-T-12JU
The contract pertains to the procurement of a washer, spring tension, identified by NSN 5310-01-678-4038 and part number 9714K112, with a single unit requirement of one packing group. Delivery is required within 20 days to the destination specified as the Field Maintenance Shop in Johnston, Iowa, under FOB Origin terms with no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards, including unit packaging marked per MIL-STD-129 without special marking codes, and palletization must adhere to DLA packaging regulations. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or an equivalent zero-based method, and non-conformances must be zero unless otherwise specified. The item must be shipped by the fastest traceable method excluding parcel post, with shipments tracked under RDD 777. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and covered defense information may apply. The contract was issued under solicitation SPE4A6-26-T-12JU with a required delivery date of July 29, 2026, and is managed by the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HE
Solicitation # SPE4A6-26-T-12EV
The contract pertains to the procurement of 64 units of a socket head cap screw, identified by NSN 5305-01-720-1042 and part number M1222SN5C320NCLN, manufactured to meet MIL-DTL-1222J specification. All supplies must comply with stringent technical and quality requirements referenced in the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. The item is designated as a critical application component, and strict prohibition is in place against intentional incorporation or direct contact of mercury or mercury-containing compounds, except for limited exceptions such as batteries, fluorescent lamps, sensors, and chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance is zero non-conformances unless otherwise stated. Delivery is FOB origin with a 171-day lead time, final delivery due by January 31, 2027, and inspection and acceptance occur at the destination warehouse in Tracy, California. Packaging must adhere to DLA packaging requirements and prohibits mercury in preservation, packing, or marking. The unit of issue is each, quantity is fixed with zero variance, and the point of contact is Bernice Adams at DLA.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 332919
New
DIBBS
TEE, PIPE
Solicitation # SPE7M2-26-Q-0717
This contract specifies the procurement of a copper alloy socket type tee fitting with a nominal pipe size of 1 inch, manufactured via a metal casting process requiring specialized tooling. The item is identified by NSN 4730-00-542-5250 with a quantity of 385 units, and delivery is required within 100 days of award. All technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates strict adherence to DLA packaging standards, configuration change management through engineering change proposals, and the removal of government identification from non-accepted supplies. Mercury or mercury-containing compounds are prohibited from intentional addition or direct contact with the product except for specific functional uses such as batteries, fluorescent lights, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. The supplier is required to furnish one Certificate of Quality Compliance (COQC) for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and make it available for Government review at the point of inspection if applicable. An electronic copy of each COQC must be uploaded as an attachment to the Receiving Report in the iRAPT system for Government records. The COQC documentation is considered part of the item’s price, and compliance is mandatory for acceptance. The solicitation is a total small business set-aside under FAR 19.5 with a response deadline of August 11, 2026, and the point of contact for inquiries is Alla Yakover. The place of performance is New Cumberland, PA, and the contracting activity falls under the Department of Defense’s Nuclear Reactor Program.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, SLEEVE
Solicitation # SPE7M2-26-Q-0714
The contract pertains to the procurement of 167 fixed bushings, identified as nuts and sleeves, with the NSN 5310-00-916-7522, designed for use in military applications under the Nuclear Reactor Program of the Department of Defense. The component features a #6 .138 inch - 32 UNC-2B threaded nut size and is constructed from aluminum alloy 2024 with an overall cadmium surface treatment, except for the internal locking insert which is made of polytetrafluoroethylene, providing a self-locking mechanism to prevent loosening under vibration. The item is classified as a commercial item and must comply with the current revision of the applicable part standard, whether military or consensus non-government standard, with previous revisions still acceptable for hardware manufactured before the solicitation date. All units must bear identification markings consistent with MIL-STD-130N and adhere to the DLA Master List of Technical and Quality Requirements referenced in the procurement documents, including quality conformance inspection and removal of government identification from non-accepted supplies. The solicitation, under number SPE7M2-26-Q-0714, is a total small business set-aside with a response deadline of August 11, 2026, and a 100-day delivery window after award. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the hardware, except in limited, approved cases such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents by NAVSEA, with portable devices containing mercury requiring shockproof construction and a secondary containment layer as per NAVSEA 5100-003D. Packaging must meet DLA requirements and all supplies are subject to federal procurement rules for military hardware. The point of contact for the procurement is Alla Yakover, and performance is required at Hill AFB, Utah, with all submissions governed by the DLA’s eProcurement system and procurement guidelines.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M2-26-Q-0718
This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTR
Solicitation # SPE7M2-26-T-5987
This contract specifies the procurement of a fixed electrolytic capacitor with NSN 5910013072343 and part number M39003/01-7300, governed by MIL-PRF-39003/1L and MIL-PRF-39003P Supp 1, with compliance required to the current revision of the DLA Master List of Technical and Quality Requirements referenced by R-numbers. The item is classified as a commercial item and is subject to strict Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Mercury and mercury-containing compounds are strictly prohibited in the product unless exempted for specific functional uses such as batteries or sensors, and portable devices containing mercury must meet shock-proof and secondary containment standards per NAVSEA 5100-003D. Use of Class I ozone-depleting substances is prohibited in all manufacturing and processing steps unless explicitly approved in writing by the contracting officer, with exceptions for commercial items and numbered parts only. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including specific lead finish labeling per IPC/JEDEC J-STD-609 on each unit package. Sampling follows MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stipulated, and critical attributes are verified at the highest levels. The product must be delivered FOB origin within 161 days, with no quantity variance allowed, inspected and accepted at destination, and shipped to the specified DLA Distribution Warner Robins address. The contract was solicited under SPE7M2-26-T-5987 with a response deadline in August 2026, and delivery is required by May 9, 2027.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334419
New
DIBBS
SOCKET, PLUG-IN ELEC
Solicitation # SPE7M2-26-T-5983
The contract specifies the procurement of one plug-in electrical socket with NSN 5935-01-604-0735 and part number RSN116890 from AMPHENOL PCD INC, under solicitation SPE7M2-26-T-5983. Delivery is required within 20 days FOB destination with no quantity variance allowed, and acceptance occurs at the delivery point. Packing must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking codes. Packaging and palletization adhere to DLA’s RP001 requirements, and all handling of hazardous materials must conform to IP025 standards. The item is to be delivered to USS HIGGINS DDG 76 at FPO AP 96667, with transportation governed by DLAD PROC NOTES C19 and C20. The original required delivery date is July 31, 2026, and the contract is tied to project EK5 TP 2 with vendor tracking code YNCA01 SIG A. Technical and quality requirements are governed by the DLA Master List referenced in RA001, and the solicitation falls under NAICS code 334419 managed by the Department of Defense’s Nuclear Reactor Program.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRI
Solicitation # SPE7M2-26-T-5986
This contract specifications pertain to a electrical plug connector designated by NSN 5935-01-260-5258 and part number D38999/26WD35PB, required in a quantity of 2,600 units to be delivered FOB origin within 161 days. The item must conform to MIL-DTL-38999N and MIL-DTL-38999/26G standards and is classified as a qualified product under the DLA Qualified Products List for connector assemblies and electrical contacts. Manufacturing sources are restricted: materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 are prohibited, as are items from Bendix Corporation manufactured between January 1977 and February 1984. Traceability documentation may be requested to verify manufacturing dates and origins. The product is designated as a critical application item and must be free of mercury and its compounds except in approved applications such as batteries, laboratory instruments, and weapon systems, with additional containment requirements for portable devices containing mercury. Use of Class I ozone-depleting substances is strictly prohibited in any phase of production unless written approval is granted. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking required. Delivery is to the DLA Distribution Center in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract enforces zero variance in quantity and requires the unit of issue to be each. The solicitation was issued on August 4, 2026, with responses due by August 17, 2026, under contract number SPE7M2-26-T-5986.
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M2-26-Q-0719
The contract awards O-rings under NSN 5331-00-167-5126 with a total quantity of 2,210 units distributed across three delivery points: Norfolk Virginia, San Diego California, and Warner Robins Georgia, with delivery required within 150 days of award. The items must comply with SAE AS3209C and AMS7276J specifications and are classified as critical application items subject to strict quality control. Manufacturing and assembly must be performed only by accredited entities listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Product List, accessible via eAuditNet. The contract prohibits the use of mercury or mercury-containing compounds in any part of the product, packaging, or preservation, with narrow exceptions for functional components like batteries and sensors specifically authorized by NAVSEA, and mandates shock-proof designs with secondary containment for permissible mercury-containing items. Zero-tolerance sampling applies under MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001 standards, including strict compliance with MIL-STD-129 marking rules and a ban on class I ozone-depleting chemicals in all materials and processes. Pricing is firm fixed price with no tolerance for quantity variances, inspection and acceptance occur at destination, and FOB terms are origin. All deliveries must use designated military shipping addresses and follow DLA transport protocols.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE7M2-26-T-5984
The contract specifies the procurement of 23,869 self-locking hexagon nuts under NSN 5310-01-358-7622, with delivery due in 161 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The nuts must comply with technical standards NASM17829 Rev 2, NASM25027 Rev 1, and MIL-DTL-32258, and are classified as a critical application item requiring strict adherence to configuration control and engineering change procedures. All supplies must be free of mercury and mercury-containing compounds except for specific exempted uses such as batteries or sensors approved by NAVSEA, and portable devices containing mercury must include a secondary containment. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require pre-approval. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified as Type 10, Class 50, and no special marking required. Sampling inspections must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Full and open competition applies, and the contract enforces DLA packaging and procurement requirements, including prohibition of mercury in preservation and packaging materials. The delivery window, quantity, and unit price are fixed with no variance allowed, and the point of contact for inquiries is David Larsen of the Department of Defense.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HE
Solicitation # SPE7M2-26-Q-0716
This contract specifies the procurement of 65 self-locking hexagon nuts identified by NSN 5310-00-255-0010 and part number MS17830-24C, manufactured in compliance with the non-government standard NASM17830 Revision 3 dated July 31, 2023, and governed by QAP-13873 Revision D. The item is classified as a commercial item and a critical application component, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. All hardware must conform to the current revision of the applicable standard, with prior revisions accepted only for previously manufactured items; no exceptions apply to future production. Sampling and inspection follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in sampled lots unless otherwise contracted. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking, except for specific exempted applications such as certain batteries, lights, instruments, or weapon systems as defined by NAVSEA, which must include secondary containment and shock-proof design. The nuts are subject to firm fixed pricing with no variance allowed in quantity, and delivery must occur within 100 days after order award. Pricing brackets are defined for quantities from 100 to 250 and 251 to 500 units, with delivery expected within 100 days for each tier. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including preservation method 33, dry clamping, and non-corrosive materials, with marking per MIL-STD-129 and no special codes. Palletization must follow DLA guidelines, and all packaging must exclude mercury or mercury compounds entirely. Items are to be shipped FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The solicitation is a total small business set-aside, with a bid deadline of August 11, 2026, and the contract is managed by the Department of Defense’s Nuclear Reactor Program.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Product Verification Testing and Quality InspectionThe contract requires the performance of Product Verification Testing and quality sampling for electrical insulation sleeving in strict accordance with MIL-STD-1916 to achieve zero non-conformances. This effort is critical to ensuring the highest level of product integrity and compliance with military quality standards, with all testing and sampling activities designed to validate conformance before acceptance. The work must be executed with precision to meet the zero-defect expectation, and the successful performer will be responsible for documenting and reporting all test results to demonstrate full adherence to the required specifications. The solicitation is classified as a subcontract under NAICS code 541380 and is issued by the Nuclear Reactor Program under the Department of Defense. The performance location is Tinker Air Force Base with a postal code of 73145-8000. The response deadline is August 12, 2026, and the solicitation was posted on August 3, 2026. All interested parties must submit their proposals by the deadline, and failure to comply with the testing protocol or deliver results meeting the zero non-conformance standard will result in rejection. The contract is not subject to a specific set-aside designation and is open to qualified subcontractors capable of executing high-precision quality assurance under strict military standards.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 561910
New
DIBBS
Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and palletization services for insulation sleeving in strict compliance with military standards MIL-STD-2073-1E, MIL-STD-129, and DLA RP001, ensuring full adherence to Department of Defense requirements for durability, identification, and handling in logistical environments. All work must be performed to meet exacting specifications for mark clarity, material compatibility, and unit configuration to support safe transport and inventory management across military supply chains. The performance location is Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, indicating the physical site where the services will be delivered and verified. This is a subcontract under NAICS code 561910, related to other support activities for transportation, and is issued by the Nuclear Reactor Program under the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 12, 2026, leaving a limited window for qualified vendors to submit proposals. The contract does not specify any set-aside status and is open to eligible subcontractors capable of meeting the stringent packaging and labeling benchmarks required for defense logistics. All submissions must be directed through the official DIBBS platform using the provided solicitation reference.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
Electrical Insulation Sleeving Manufacturing and SupplyThe contract entails the manufacture and supply of 15,111 feet of electrical insulation sleeving identified by NSN 5970-00-954-1624, which must fully comply with the SAE AS23053C Rev. C specification for use in critical military applications. This procurement is part of a subcontract awarded under the Nuclear Reactor Program within the Department of Defense, and the materials are required to meet rigorous performance and quality standards appropriate for high-stakes defense systems. The place of performance is designated as Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, indicating where the delivered goods are to be utilized or inspected. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 12, 2026, indicating a narrow window for qualified suppliers to submit proposals. The NAICS code 335931 classifies the activity under Other Electrical Equipment and Component Manufacturing, aligning the contract with specialized electrical component production rather than general wire and cable manufacturing. The contract is structured as a subcontract, suggesting integration into a larger supply chain managed by a prime contractor under the Department of Defense’s logistics framework. All deliverables must meet exacting military specifications to ensure reliability in sensitive nuclearreactor-related infrastructure.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details